Dorman 542-068 Suspension Stabilizer Bar Link Kit - Front Right
Dorman 542-068 Rear Stabilizer Bar Link
Dorman 542-068 is a rear suspension stabilizer bar link kit built as a direct replacement for the original equipment link on select Acura MDX models. It is engineered for the rear suspension and uses a steel link body with coated finish, greaseable service points, and metal bearings for dependable sway bar connection performance.
Key Features
- Fits 2014-2020 Acura MDX, rear suspension
- Male threaded ends with 12 mm attachment size at both ends
- Steel link material with coated finish for corrosion resistance
- Greaseable design with grease fittings included
- Metal bearing material for OE-style replacement service
- Locking nuts included; adjustable design not required
- Dust boot included for added joint protection
- Standard replacement grade for direct-fit service
Detailed Description
This Dorman stabilizer bar link kit, part number 542-068, is made for the rear suspension on 2014-2020 Acura MDX applications. It connects the sway bar to the suspension assembly to help maintain stable handling response and restore proper link function when the original part is worn or damaged. The design uses male threaded ends, M1.25 bolt thread pitch, and 12 mm end attachment sizes for a direct replacement approach. This part cross-references MOOG Chassis Products K750679 for the same application.
For buyers searching for a rear sway bar link for Acura MDX, a rear stabilizer link replacement, or Dorman 542-068 for 2014-2020 Acura MDX front right fitment language, this part is listed for the rear suspension position only. It is a standard replacement component built to match the original equipment layout on the confirmed vehicle range.
What It Helps Address
- Clunking or rattling from a worn rear stabilizer link
- Excess play in the sway bar connection
- Uneven handling response caused by a damaged link assembly
- Joint wear from loss of lubrication or protective sealing
- Corrosion-related replacement needs in the rear suspension
Installation Notes and Tips
Verify rear suspension fitment before ordering. This part is listed for the rear position on 2014-2020 Acura MDX, and the threaded male ends should be matched to the vehicle’s original attachment style. Inspect the sway bar mounting points, adjacent bushings, and fasteners during replacement so the new link is installed on a clean, secure suspension interface. Use the specified torque procedure for the vehicle application.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable replacement for the original equipment on specific vehicles. The part is built as a standard replacement suspension component for consistent fit and function on the confirmed Acura MDX applications.
Original: $47.03
-65%$47.03
$16.46Dorman 542-068 Suspension Stabilizer Bar Link Kit - Front Right
Dorman 542-068 Rear Stabilizer Bar Link
Dorman 542-068 is a rear suspension stabilizer bar link kit built as a direct replacement for the original equipment link on select Acura MDX models. It is engineered for the rear suspension and uses a steel link body with coated finish, greaseable service points, and metal bearings for dependable sway bar connection performance.
Key Features
- Fits 2014-2020 Acura MDX, rear suspension
- Male threaded ends with 12 mm attachment size at both ends
- Steel link material with coated finish for corrosion resistance
- Greaseable design with grease fittings included
- Metal bearing material for OE-style replacement service
- Locking nuts included; adjustable design not required
- Dust boot included for added joint protection
- Standard replacement grade for direct-fit service
Detailed Description
This Dorman stabilizer bar link kit, part number 542-068, is made for the rear suspension on 2014-2020 Acura MDX applications. It connects the sway bar to the suspension assembly to help maintain stable handling response and restore proper link function when the original part is worn or damaged. The design uses male threaded ends, M1.25 bolt thread pitch, and 12 mm end attachment sizes for a direct replacement approach. This part cross-references MOOG Chassis Products K750679 for the same application.
For buyers searching for a rear sway bar link for Acura MDX, a rear stabilizer link replacement, or Dorman 542-068 for 2014-2020 Acura MDX front right fitment language, this part is listed for the rear suspension position only. It is a standard replacement component built to match the original equipment layout on the confirmed vehicle range.
What It Helps Address
- Clunking or rattling from a worn rear stabilizer link
- Excess play in the sway bar connection
- Uneven handling response caused by a damaged link assembly
- Joint wear from loss of lubrication or protective sealing
- Corrosion-related replacement needs in the rear suspension
Installation Notes and Tips
Verify rear suspension fitment before ordering. This part is listed for the rear position on 2014-2020 Acura MDX, and the threaded male ends should be matched to the vehicle’s original attachment style. Inspect the sway bar mounting points, adjacent bushings, and fasteners during replacement so the new link is installed on a clean, secure suspension interface. Use the specified torque procedure for the vehicle application.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable replacement for the original equipment on specific vehicles. The part is built as a standard replacement suspension component for consistent fit and function on the confirmed Acura MDX applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 542-068 Rear Stabilizer Bar Link
Dorman 542-068 is a rear suspension stabilizer bar link kit built as a direct replacement for the original equipment link on select Acura MDX models. It is engineered for the rear suspension and uses a steel link body with coated finish, greaseable service points, and metal bearings for dependable sway bar connection performance.
Key Features
- Fits 2014-2020 Acura MDX, rear suspension
- Male threaded ends with 12 mm attachment size at both ends
- Steel link material with coated finish for corrosion resistance
- Greaseable design with grease fittings included
- Metal bearing material for OE-style replacement service
- Locking nuts included; adjustable design not required
- Dust boot included for added joint protection
- Standard replacement grade for direct-fit service
Detailed Description
This Dorman stabilizer bar link kit, part number 542-068, is made for the rear suspension on 2014-2020 Acura MDX applications. It connects the sway bar to the suspension assembly to help maintain stable handling response and restore proper link function when the original part is worn or damaged. The design uses male threaded ends, M1.25 bolt thread pitch, and 12 mm end attachment sizes for a direct replacement approach. This part cross-references MOOG Chassis Products K750679 for the same application.
For buyers searching for a rear sway bar link for Acura MDX, a rear stabilizer link replacement, or Dorman 542-068 for 2014-2020 Acura MDX front right fitment language, this part is listed for the rear suspension position only. It is a standard replacement component built to match the original equipment layout on the confirmed vehicle range.
What It Helps Address
- Clunking or rattling from a worn rear stabilizer link
- Excess play in the sway bar connection
- Uneven handling response caused by a damaged link assembly
- Joint wear from loss of lubrication or protective sealing
- Corrosion-related replacement needs in the rear suspension
Installation Notes and Tips
Verify rear suspension fitment before ordering. This part is listed for the rear position on 2014-2020 Acura MDX, and the threaded male ends should be matched to the vehicle’s original attachment style. Inspect the sway bar mounting points, adjacent bushings, and fasteners during replacement so the new link is installed on a clean, secure suspension interface. Use the specified torque procedure for the vehicle application.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable replacement for the original equipment on specific vehicles. The part is built as a standard replacement suspension component for consistent fit and function on the confirmed Acura MDX applications.
