Dorman 542-229 Suspension Stabilizer Bar Link Kit - Rear
Rear Stabilizer Bar Link Kit for Select Hyundai and Kia
Dorman 542-229 is a rear suspension stabilizer bar link kit built as a standard replacement for specific Hyundai and Kia applications. It is precision-engineered and tested to replace the original equipment link on vehicles such as the Hyundai Elantra, Kia Forte, and Hyundai Kona Electric.
- Rear suspension stabilizer bar link kit for OE-style replacement
- Fits select 2017-2024 Hyundai and Kia rear applications
- Male threaded end and bushing end design
- Coated finish for added corrosion resistance
- Greaseable design with grease fittings included
- Metal bearing material with rubber bushing material
- Dust boot included for added protection
- Locking nuts included
- Cross-references MOOG Chassis Products K750892 and Delphi TC6770 for the same application
Detailed Product Information
Dorman 542-229 is engineered for rear suspension service where a worn stabilizer bar link can affect handling and noise control. The link uses a male threaded end on one side and a bushing-style end on the other, with a coated finish and greaseable construction to support routine maintenance. This part number, 542-229, is a direct-fit style replacement for select Hyundai Elantra, Hyundai Elantra GT, Hyundai Ioniq, Hyundai Veloster, Hyundai Veloster N, Kia Forte, Kia Forte5, Kia Niro, Kia Niro EV, Kia Soul EV, Hyundai Kona Electric, and Hyundai Kona N rear applications.
It is built with metal bearings, rubber bushings, a sleeve, locking nuts, and a dust boot. The design is not adjustable and does not include bolts, washers, or separate bushings. End attachment sizes are 12 mm and 15 mm, with a 72.5 length and 60 sleeve length.
Common Problems This Part Can Address
- Rear suspension clunking or rattling from a worn stabilizer link
- Excess play in the rear sway bar connection
- Uneven handling response during cornering
- Noise caused by deteriorated bushings or link hardware
- Replacement needs after corrosion or wear on the original link
Installation Notes and Fitment
Fits 2019-2024 Kia Forte, rear. Fits 2020-2024 Kia Forte5, rear. Fits 2019-2023 Hyundai Kona Electric, rear. Fits 2022-2023 Hyundai Kona N, rear. Fits 2020-2023 Kia Soul EV, rear. Fits 2017-2022 Hyundai Ioniq, rear. Fits 2019-2022 Hyundai Veloster N, rear. Fits 2017-2022 Kia Niro, rear. Fits 2019-2022 Kia Niro EV, rear. Fits 2019-2021 Hyundai Veloster, rear. Fits 2017-2020 Hyundai Elantra, rear. Fits 2018-2020 Hyundai Elantra GT, rear.
Before installation, confirm rear suspension configuration and match the end attachment sizes to the vehicle application. Inspect the stabilizer bar, mounting points, and surrounding bushings for wear before replacing the link. Use proper torque procedures during installation to help prevent premature noise or joint wear.
Quality Assurance
Dorman designs this suspension stabilizer bar link kit as a standard replacement part and subjects it to engineering and testing validation for OE-style fit and function on the listed vehicles. The part number 542-229 is built to meet the needs of rear suspension service on select Hyundai and Kia models.
Dorman 542-229 Suspension Stabilizer Bar Link Kit - Rear
Rear Stabilizer Bar Link Kit for Select Hyundai and Kia
Dorman 542-229 is a rear suspension stabilizer bar link kit built as a standard replacement for specific Hyundai and Kia applications. It is precision-engineered and tested to replace the original equipment link on vehicles such as the Hyundai Elantra, Kia Forte, and Hyundai Kona Electric.
- Rear suspension stabilizer bar link kit for OE-style replacement
- Fits select 2017-2024 Hyundai and Kia rear applications
- Male threaded end and bushing end design
- Coated finish for added corrosion resistance
- Greaseable design with grease fittings included
- Metal bearing material with rubber bushing material
- Dust boot included for added protection
- Locking nuts included
- Cross-references MOOG Chassis Products K750892 and Delphi TC6770 for the same application
Detailed Product Information
Dorman 542-229 is engineered for rear suspension service where a worn stabilizer bar link can affect handling and noise control. The link uses a male threaded end on one side and a bushing-style end on the other, with a coated finish and greaseable construction to support routine maintenance. This part number, 542-229, is a direct-fit style replacement for select Hyundai Elantra, Hyundai Elantra GT, Hyundai Ioniq, Hyundai Veloster, Hyundai Veloster N, Kia Forte, Kia Forte5, Kia Niro, Kia Niro EV, Kia Soul EV, Hyundai Kona Electric, and Hyundai Kona N rear applications.
It is built with metal bearings, rubber bushings, a sleeve, locking nuts, and a dust boot. The design is not adjustable and does not include bolts, washers, or separate bushings. End attachment sizes are 12 mm and 15 mm, with a 72.5 length and 60 sleeve length.
Common Problems This Part Can Address
- Rear suspension clunking or rattling from a worn stabilizer link
- Excess play in the rear sway bar connection
- Uneven handling response during cornering
- Noise caused by deteriorated bushings or link hardware
- Replacement needs after corrosion or wear on the original link
Installation Notes and Fitment
Fits 2019-2024 Kia Forte, rear. Fits 2020-2024 Kia Forte5, rear. Fits 2019-2023 Hyundai Kona Electric, rear. Fits 2022-2023 Hyundai Kona N, rear. Fits 2020-2023 Kia Soul EV, rear. Fits 2017-2022 Hyundai Ioniq, rear. Fits 2019-2022 Hyundai Veloster N, rear. Fits 2017-2022 Kia Niro, rear. Fits 2019-2022 Kia Niro EV, rear. Fits 2019-2021 Hyundai Veloster, rear. Fits 2017-2020 Hyundai Elantra, rear. Fits 2018-2020 Hyundai Elantra GT, rear.
Before installation, confirm rear suspension configuration and match the end attachment sizes to the vehicle application. Inspect the stabilizer bar, mounting points, and surrounding bushings for wear before replacing the link. Use proper torque procedures during installation to help prevent premature noise or joint wear.
Quality Assurance
Dorman designs this suspension stabilizer bar link kit as a standard replacement part and subjects it to engineering and testing validation for OE-style fit and function on the listed vehicles. The part number 542-229 is built to meet the needs of rear suspension service on select Hyundai and Kia models.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Stabilizer Bar Link Kit for Select Hyundai and Kia
Dorman 542-229 is a rear suspension stabilizer bar link kit built as a standard replacement for specific Hyundai and Kia applications. It is precision-engineered and tested to replace the original equipment link on vehicles such as the Hyundai Elantra, Kia Forte, and Hyundai Kona Electric.
- Rear suspension stabilizer bar link kit for OE-style replacement
- Fits select 2017-2024 Hyundai and Kia rear applications
- Male threaded end and bushing end design
- Coated finish for added corrosion resistance
- Greaseable design with grease fittings included
- Metal bearing material with rubber bushing material
- Dust boot included for added protection
- Locking nuts included
- Cross-references MOOG Chassis Products K750892 and Delphi TC6770 for the same application
Detailed Product Information
Dorman 542-229 is engineered for rear suspension service where a worn stabilizer bar link can affect handling and noise control. The link uses a male threaded end on one side and a bushing-style end on the other, with a coated finish and greaseable construction to support routine maintenance. This part number, 542-229, is a direct-fit style replacement for select Hyundai Elantra, Hyundai Elantra GT, Hyundai Ioniq, Hyundai Veloster, Hyundai Veloster N, Kia Forte, Kia Forte5, Kia Niro, Kia Niro EV, Kia Soul EV, Hyundai Kona Electric, and Hyundai Kona N rear applications.
It is built with metal bearings, rubber bushings, a sleeve, locking nuts, and a dust boot. The design is not adjustable and does not include bolts, washers, or separate bushings. End attachment sizes are 12 mm and 15 mm, with a 72.5 length and 60 sleeve length.
Common Problems This Part Can Address
- Rear suspension clunking or rattling from a worn stabilizer link
- Excess play in the rear sway bar connection
- Uneven handling response during cornering
- Noise caused by deteriorated bushings or link hardware
- Replacement needs after corrosion or wear on the original link
Installation Notes and Fitment
Fits 2019-2024 Kia Forte, rear. Fits 2020-2024 Kia Forte5, rear. Fits 2019-2023 Hyundai Kona Electric, rear. Fits 2022-2023 Hyundai Kona N, rear. Fits 2020-2023 Kia Soul EV, rear. Fits 2017-2022 Hyundai Ioniq, rear. Fits 2019-2022 Hyundai Veloster N, rear. Fits 2017-2022 Kia Niro, rear. Fits 2019-2022 Kia Niro EV, rear. Fits 2019-2021 Hyundai Veloster, rear. Fits 2017-2020 Hyundai Elantra, rear. Fits 2018-2020 Hyundai Elantra GT, rear.
Before installation, confirm rear suspension configuration and match the end attachment sizes to the vehicle application. Inspect the stabilizer bar, mounting points, and surrounding bushings for wear before replacing the link. Use proper torque procedures during installation to help prevent premature noise or joint wear.
Quality Assurance
Dorman designs this suspension stabilizer bar link kit as a standard replacement part and subjects it to engineering and testing validation for OE-style fit and function on the listed vehicles. The part number 542-229 is built to meet the needs of rear suspension service on select Hyundai and Kia models.
