Dorman 542-243 Suspension Stabilizer Bar Link Kit - Front Left
Dorman 542-243 Rear Stabilizer Link
Dorman 542-243 is a rear suspension stabilizer bar link kit built as a direct replacement for the original equipment link on specific INFINITI and Nissan applications. It is precision-engineered and tested for reliable fitment on the rear suspension, including front-left listed applications for the vehicles shown below.
- Rear suspension stabilizer bar link kit for OE-style replacement
- Fits front left applications on select INFINITI Q50, Q60, Q70, Q70L, QX50, Q40, EX37, EX35, G37, M35h, M37, M56, G25, and G35 models, plus Nissan 370Z and Nissan Z
- Male threaded ends with 14 mm and 12 mm attachment sizes
- Coated finish for added surface protection
- Greaseable design with grease fittings, dust boot, locking nuts, and polymer bearings
- Standard replacement grade for direct service use
Fitment and application details
This part number is used on rear suspension service where the stabilizer bar link connects the sway bar to the suspension assembly. It cross-references MOOG Chassis Products K750194 for the same application. For shoppers searching for a Dorman 542-243 rear sway bar link or a front-left stabilizer link for INFINITI Q50 and Nissan 370Z, this part matches the listed OE-style replacement use case.
- Fits 2014-2024 INFINITI Q50, Front Left
- Fits 2023-2024 Nissan Z, Front Left
- Fits 2014-2022 INFINITI Q60, Front Left
- Fits 2009-2021 Nissan 370Z, Front Left
- Fits 2014-2019 INFINITI Q70, Front Left
- Fits 2015-2019 INFINITI Q70L, Front Left
- Fits 2014-2017 INFINITI QX50, Front Left
- Fits 2015 INFINITI Q40, Front Left
- Fits 2013 INFINITI EX37, Front Left
- Fits 2008-2013 INFINITI G37, Front Left
- Fits 2012-2013 INFINITI M35h, Front Left
- Fits 2011-2013 INFINITI M37, Front Left
- Fits 2011-2013 INFINITI M56, Front Left
- Fits 2008-2012 INFINITI EX35, Front Left
- Fits 2011-2012 INFINITI G25, Front Left
- Fits 2007-2008 INFINITI G35, Front Left
What this part helps address
- Clunking or rattling from a worn stabilizer link
- Excess sway-bar play caused by worn bearings or joints
- Uneven rear suspension response during cornering
- Loose or noisy front-left link hardware on the listed vehicles
- Service replacement for a damaged or corroded OE link
Installation notes and tips
Verify end sizes, thread pitch, and position before installation. This link uses male threaded ends, includes locking nuts, and is not adjustable. Because it is greaseable and includes grease fittings, service technicians can maintain the joint after installation. Confirm vehicle-specific fitment for the exact year, make, model, and front-left position before ordering.
Quality assurance
Dorman manufactures this stabilizer bar link kit as a precision-engineered replacement and subjects it to testing for dependable OE-style service on the listed applications. The coated finish, polymer bearing material, dust boot, and greaseable construction support consistent suspension service on compatible INFINITI and Nissan models.
Dorman 542-243 Suspension Stabilizer Bar Link Kit - Front Left
Dorman 542-243 Rear Stabilizer Link
Dorman 542-243 is a rear suspension stabilizer bar link kit built as a direct replacement for the original equipment link on specific INFINITI and Nissan applications. It is precision-engineered and tested for reliable fitment on the rear suspension, including front-left listed applications for the vehicles shown below.
- Rear suspension stabilizer bar link kit for OE-style replacement
- Fits front left applications on select INFINITI Q50, Q60, Q70, Q70L, QX50, Q40, EX37, EX35, G37, M35h, M37, M56, G25, and G35 models, plus Nissan 370Z and Nissan Z
- Male threaded ends with 14 mm and 12 mm attachment sizes
- Coated finish for added surface protection
- Greaseable design with grease fittings, dust boot, locking nuts, and polymer bearings
- Standard replacement grade for direct service use
Fitment and application details
This part number is used on rear suspension service where the stabilizer bar link connects the sway bar to the suspension assembly. It cross-references MOOG Chassis Products K750194 for the same application. For shoppers searching for a Dorman 542-243 rear sway bar link or a front-left stabilizer link for INFINITI Q50 and Nissan 370Z, this part matches the listed OE-style replacement use case.
- Fits 2014-2024 INFINITI Q50, Front Left
- Fits 2023-2024 Nissan Z, Front Left
- Fits 2014-2022 INFINITI Q60, Front Left
- Fits 2009-2021 Nissan 370Z, Front Left
- Fits 2014-2019 INFINITI Q70, Front Left
- Fits 2015-2019 INFINITI Q70L, Front Left
- Fits 2014-2017 INFINITI QX50, Front Left
- Fits 2015 INFINITI Q40, Front Left
- Fits 2013 INFINITI EX37, Front Left
- Fits 2008-2013 INFINITI G37, Front Left
- Fits 2012-2013 INFINITI M35h, Front Left
- Fits 2011-2013 INFINITI M37, Front Left
- Fits 2011-2013 INFINITI M56, Front Left
- Fits 2008-2012 INFINITI EX35, Front Left
- Fits 2011-2012 INFINITI G25, Front Left
- Fits 2007-2008 INFINITI G35, Front Left
What this part helps address
- Clunking or rattling from a worn stabilizer link
- Excess sway-bar play caused by worn bearings or joints
- Uneven rear suspension response during cornering
- Loose or noisy front-left link hardware on the listed vehicles
- Service replacement for a damaged or corroded OE link
Installation notes and tips
Verify end sizes, thread pitch, and position before installation. This link uses male threaded ends, includes locking nuts, and is not adjustable. Because it is greaseable and includes grease fittings, service technicians can maintain the joint after installation. Confirm vehicle-specific fitment for the exact year, make, model, and front-left position before ordering.
Quality assurance
Dorman manufactures this stabilizer bar link kit as a precision-engineered replacement and subjects it to testing for dependable OE-style service on the listed applications. The coated finish, polymer bearing material, dust boot, and greaseable construction support consistent suspension service on compatible INFINITI and Nissan models.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 542-243 Rear Stabilizer Link
Dorman 542-243 is a rear suspension stabilizer bar link kit built as a direct replacement for the original equipment link on specific INFINITI and Nissan applications. It is precision-engineered and tested for reliable fitment on the rear suspension, including front-left listed applications for the vehicles shown below.
- Rear suspension stabilizer bar link kit for OE-style replacement
- Fits front left applications on select INFINITI Q50, Q60, Q70, Q70L, QX50, Q40, EX37, EX35, G37, M35h, M37, M56, G25, and G35 models, plus Nissan 370Z and Nissan Z
- Male threaded ends with 14 mm and 12 mm attachment sizes
- Coated finish for added surface protection
- Greaseable design with grease fittings, dust boot, locking nuts, and polymer bearings
- Standard replacement grade for direct service use
Fitment and application details
This part number is used on rear suspension service where the stabilizer bar link connects the sway bar to the suspension assembly. It cross-references MOOG Chassis Products K750194 for the same application. For shoppers searching for a Dorman 542-243 rear sway bar link or a front-left stabilizer link for INFINITI Q50 and Nissan 370Z, this part matches the listed OE-style replacement use case.
- Fits 2014-2024 INFINITI Q50, Front Left
- Fits 2023-2024 Nissan Z, Front Left
- Fits 2014-2022 INFINITI Q60, Front Left
- Fits 2009-2021 Nissan 370Z, Front Left
- Fits 2014-2019 INFINITI Q70, Front Left
- Fits 2015-2019 INFINITI Q70L, Front Left
- Fits 2014-2017 INFINITI QX50, Front Left
- Fits 2015 INFINITI Q40, Front Left
- Fits 2013 INFINITI EX37, Front Left
- Fits 2008-2013 INFINITI G37, Front Left
- Fits 2012-2013 INFINITI M35h, Front Left
- Fits 2011-2013 INFINITI M37, Front Left
- Fits 2011-2013 INFINITI M56, Front Left
- Fits 2008-2012 INFINITI EX35, Front Left
- Fits 2011-2012 INFINITI G25, Front Left
- Fits 2007-2008 INFINITI G35, Front Left
What this part helps address
- Clunking or rattling from a worn stabilizer link
- Excess sway-bar play caused by worn bearings or joints
- Uneven rear suspension response during cornering
- Loose or noisy front-left link hardware on the listed vehicles
- Service replacement for a damaged or corroded OE link
Installation notes and tips
Verify end sizes, thread pitch, and position before installation. This link uses male threaded ends, includes locking nuts, and is not adjustable. Because it is greaseable and includes grease fittings, service technicians can maintain the joint after installation. Confirm vehicle-specific fitment for the exact year, make, model, and front-left position before ordering.
Quality assurance
Dorman manufactures this stabilizer bar link kit as a precision-engineered replacement and subjects it to testing for dependable OE-style service on the listed applications. The coated finish, polymer bearing material, dust boot, and greaseable construction support consistent suspension service on compatible INFINITI and Nissan models.
