Dorman 542-246 Suspension Stabilizer Bar Link Kit - Front Right
Dorman 542-246 Front Right Stabilizer Link
Dorman 542-246 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on specific INFINITI applications. It is precision-engineered and tested for reliable fitment on the front right side, with a steel link body, coated finish, and greaseable design.
Key Features
- Direct replacement stabilizer bar link kit for the front right suspension position
- Steel link construction with a coated finish for added corrosion resistance
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings and dust boot included
- Polymer bearing material for OE-style suspension service
- Locking nuts included; no bushings, washers, bolts, or sleeve included
- Part number 542-246 for catalog and cross-reference lookup
Detailed Description
This Dorman stabilizer bar link is made for front right suspension service on INFINITI Q50, Q60, Q70, Q70L, QX50, Q40, EX37, EX35, G37, M37, M56, G25, and G35 applications listed below. The design uses male threaded ends, M1.25 bolt thread pitch, and a 65 mm length to match the specified OE-style geometry for the vehicle platform. If you are replacing a worn sway bar link on an INFINITI Q50 front right suspension or servicing a front right stabilizer link on an INFINITI G37, this part number 542-246 is built for that application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Clunking or rattling from a worn front right stabilizer link
- Excessive play in the sway bar connection
- Uneven suspension response over bumps and turns
- Noise caused by degraded link bearings or joints
- Loss of stabilizer bar control at the front right corner
Installation Notes and Tips
Verify vehicle year, make, model, and front right position before installation. Confirm the 12 mm end attachment size and M1.25 thread pitch match the original hardware specification on the vehicle. Because this link is greaseable and includes a dust boot, inspect surrounding suspension components and service the area as needed during replacement.
- Fits 2014-2024 INFINITI Q50, front right
- Fits 2017-2022 INFINITI Q60, front right
- Fits 2014-2015 INFINITI Q60, front right
- Fits 2014-2019 INFINITI Q70, front right
- Fits 2015-2019 INFINITI Q70L, front right
- Fits 2014-2017 INFINITI QX50, front right
- Fits 2015 INFINITI Q40, front right
- Fits 2013 INFINITI EX37, front right
- Fits 2009-2013 INFINITI G37, front right
- Fits 2011-2013 INFINITI M37, front right
- Fits 2011-2013 INFINITI M56, front right
- Fits 2008-2012 INFINITI EX35, front right
- Fits 2011-2012 INFINITI G25, front right
- Fits 2007-2008 INFINITI G35, front right
Quality Assurance
Dorman engineers this suspension stabilizer bar link kit as a standard replacement part and rigorously tests it for reliable OE-style service on the listed INFINITI applications. Part number 542-246 is built to meet the specified fitment and suspension requirements for the front right position.
Dorman 542-246 Suspension Stabilizer Bar Link Kit - Front Right
Dorman 542-246 Front Right Stabilizer Link
Dorman 542-246 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on specific INFINITI applications. It is precision-engineered and tested for reliable fitment on the front right side, with a steel link body, coated finish, and greaseable design.
Key Features
- Direct replacement stabilizer bar link kit for the front right suspension position
- Steel link construction with a coated finish for added corrosion resistance
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings and dust boot included
- Polymer bearing material for OE-style suspension service
- Locking nuts included; no bushings, washers, bolts, or sleeve included
- Part number 542-246 for catalog and cross-reference lookup
Detailed Description
This Dorman stabilizer bar link is made for front right suspension service on INFINITI Q50, Q60, Q70, Q70L, QX50, Q40, EX37, EX35, G37, M37, M56, G25, and G35 applications listed below. The design uses male threaded ends, M1.25 bolt thread pitch, and a 65 mm length to match the specified OE-style geometry for the vehicle platform. If you are replacing a worn sway bar link on an INFINITI Q50 front right suspension or servicing a front right stabilizer link on an INFINITI G37, this part number 542-246 is built for that application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Clunking or rattling from a worn front right stabilizer link
- Excessive play in the sway bar connection
- Uneven suspension response over bumps and turns
- Noise caused by degraded link bearings or joints
- Loss of stabilizer bar control at the front right corner
Installation Notes and Tips
Verify vehicle year, make, model, and front right position before installation. Confirm the 12 mm end attachment size and M1.25 thread pitch match the original hardware specification on the vehicle. Because this link is greaseable and includes a dust boot, inspect surrounding suspension components and service the area as needed during replacement.
- Fits 2014-2024 INFINITI Q50, front right
- Fits 2017-2022 INFINITI Q60, front right
- Fits 2014-2015 INFINITI Q60, front right
- Fits 2014-2019 INFINITI Q70, front right
- Fits 2015-2019 INFINITI Q70L, front right
- Fits 2014-2017 INFINITI QX50, front right
- Fits 2015 INFINITI Q40, front right
- Fits 2013 INFINITI EX37, front right
- Fits 2009-2013 INFINITI G37, front right
- Fits 2011-2013 INFINITI M37, front right
- Fits 2011-2013 INFINITI M56, front right
- Fits 2008-2012 INFINITI EX35, front right
- Fits 2011-2012 INFINITI G25, front right
- Fits 2007-2008 INFINITI G35, front right
Quality Assurance
Dorman engineers this suspension stabilizer bar link kit as a standard replacement part and rigorously tests it for reliable OE-style service on the listed INFINITI applications. Part number 542-246 is built to meet the specified fitment and suspension requirements for the front right position.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 542-246 Front Right Stabilizer Link
Dorman 542-246 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on specific INFINITI applications. It is precision-engineered and tested for reliable fitment on the front right side, with a steel link body, coated finish, and greaseable design.
Key Features
- Direct replacement stabilizer bar link kit for the front right suspension position
- Steel link construction with a coated finish for added corrosion resistance
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings and dust boot included
- Polymer bearing material for OE-style suspension service
- Locking nuts included; no bushings, washers, bolts, or sleeve included
- Part number 542-246 for catalog and cross-reference lookup
Detailed Description
This Dorman stabilizer bar link is made for front right suspension service on INFINITI Q50, Q60, Q70, Q70L, QX50, Q40, EX37, EX35, G37, M37, M56, G25, and G35 applications listed below. The design uses male threaded ends, M1.25 bolt thread pitch, and a 65 mm length to match the specified OE-style geometry for the vehicle platform. If you are replacing a worn sway bar link on an INFINITI Q50 front right suspension or servicing a front right stabilizer link on an INFINITI G37, this part number 542-246 is built for that application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Clunking or rattling from a worn front right stabilizer link
- Excessive play in the sway bar connection
- Uneven suspension response over bumps and turns
- Noise caused by degraded link bearings or joints
- Loss of stabilizer bar control at the front right corner
Installation Notes and Tips
Verify vehicle year, make, model, and front right position before installation. Confirm the 12 mm end attachment size and M1.25 thread pitch match the original hardware specification on the vehicle. Because this link is greaseable and includes a dust boot, inspect surrounding suspension components and service the area as needed during replacement.
- Fits 2014-2024 INFINITI Q50, front right
- Fits 2017-2022 INFINITI Q60, front right
- Fits 2014-2015 INFINITI Q60, front right
- Fits 2014-2019 INFINITI Q70, front right
- Fits 2015-2019 INFINITI Q70L, front right
- Fits 2014-2017 INFINITI QX50, front right
- Fits 2015 INFINITI Q40, front right
- Fits 2013 INFINITI EX37, front right
- Fits 2009-2013 INFINITI G37, front right
- Fits 2011-2013 INFINITI M37, front right
- Fits 2011-2013 INFINITI M56, front right
- Fits 2008-2012 INFINITI EX35, front right
- Fits 2011-2012 INFINITI G25, front right
- Fits 2007-2008 INFINITI G35, front right
Quality Assurance
Dorman engineers this suspension stabilizer bar link kit as a standard replacement part and rigorously tests it for reliable OE-style service on the listed INFINITI applications. Part number 542-246 is built to meet the specified fitment and suspension requirements for the front right position.
