Dorman 542-285 Suspension Stabilizer Bar Link Kit - Front Left
Dorman 542-285 Stabilizer Bar Link Kit
Dorman 542-285 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on specific vehicles. It is engineered and tested for reliable fit and function on the rear suspension of the 2014-2017 Kia Rondo, front left application listed in the fitment data.
Key Features
- Direct replacement stabilizer bar link kit for OE-style suspension service
- Fits 2014-2017 Kia Rondo, front left
- Steel link material with coated finish for corrosion resistance
- Male threaded ends with 12 mm attachment sizes at both ends
- Greaseable design with grease fittings and dust boot included
- Metal bearing material and locking nuts included
- Standard replacement grade for suspension repair work
Detailed Description
This Dorman suspension stabilizer bar link kit, part number 542-285, is designed for vehicles that need a replacement sway bar link with OE-style dimensions and hardware interface. The link uses male threaded ends, a steel construction, and a coated finish to support dependable service in the suspension system. For fitment-specific searches, this part is listed for the 2014-2017 Kia Rondo, front left, and the same application is also referenced by cross numbers such as Delphi TC7790 and Mevotech Supreme MS908109.
The design includes grease fittings, a greaseable configuration, a dust boot, metal bearings, and locking nuts. Those details matter when replacing a worn stabilizer bar link on a Kia Rondo because they help restore proper sway bar connection and suspension response without changing the original mounting style. If you are searching for Dorman 542-285 for a 2014 Kia Rondo front left stabilizer link or a 2017 Kia Rondo front left sway bar link, this part matches the listed application.
What It Helps Address
- Clunking or knocking noises from the front suspension
- Excess play in the stabilizer bar connection
- Loose or worn sway bar link joints
- Uneven handling response over bumps and turns
- Suspension noise caused by deteriorated link components
Installation Notes
Verify the vehicle position before installation: this listing is for the front left side on the 2014-2017 Kia Rondo. Confirm the 12 mm end attachment sizes and male threaded end style match the original part before removal. Because the link is greaseable, service access to the fittings should be checked during installation and future maintenance. Always inspect adjacent suspension components, including bushings and mounting points, for wear before completing the repair.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable replacement for the original equipment on the specified vehicles. Part number 542-285 is built to standard replacement specifications for suspension service.
Dorman 542-285 Suspension Stabilizer Bar Link Kit - Front Left
Dorman 542-285 Stabilizer Bar Link Kit
Dorman 542-285 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on specific vehicles. It is engineered and tested for reliable fit and function on the rear suspension of the 2014-2017 Kia Rondo, front left application listed in the fitment data.
Key Features
- Direct replacement stabilizer bar link kit for OE-style suspension service
- Fits 2014-2017 Kia Rondo, front left
- Steel link material with coated finish for corrosion resistance
- Male threaded ends with 12 mm attachment sizes at both ends
- Greaseable design with grease fittings and dust boot included
- Metal bearing material and locking nuts included
- Standard replacement grade for suspension repair work
Detailed Description
This Dorman suspension stabilizer bar link kit, part number 542-285, is designed for vehicles that need a replacement sway bar link with OE-style dimensions and hardware interface. The link uses male threaded ends, a steel construction, and a coated finish to support dependable service in the suspension system. For fitment-specific searches, this part is listed for the 2014-2017 Kia Rondo, front left, and the same application is also referenced by cross numbers such as Delphi TC7790 and Mevotech Supreme MS908109.
The design includes grease fittings, a greaseable configuration, a dust boot, metal bearings, and locking nuts. Those details matter when replacing a worn stabilizer bar link on a Kia Rondo because they help restore proper sway bar connection and suspension response without changing the original mounting style. If you are searching for Dorman 542-285 for a 2014 Kia Rondo front left stabilizer link or a 2017 Kia Rondo front left sway bar link, this part matches the listed application.
What It Helps Address
- Clunking or knocking noises from the front suspension
- Excess play in the stabilizer bar connection
- Loose or worn sway bar link joints
- Uneven handling response over bumps and turns
- Suspension noise caused by deteriorated link components
Installation Notes
Verify the vehicle position before installation: this listing is for the front left side on the 2014-2017 Kia Rondo. Confirm the 12 mm end attachment sizes and male threaded end style match the original part before removal. Because the link is greaseable, service access to the fittings should be checked during installation and future maintenance. Always inspect adjacent suspension components, including bushings and mounting points, for wear before completing the repair.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable replacement for the original equipment on the specified vehicles. Part number 542-285 is built to standard replacement specifications for suspension service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 542-285 Stabilizer Bar Link Kit
Dorman 542-285 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment link on specific vehicles. It is engineered and tested for reliable fit and function on the rear suspension of the 2014-2017 Kia Rondo, front left application listed in the fitment data.
Key Features
- Direct replacement stabilizer bar link kit for OE-style suspension service
- Fits 2014-2017 Kia Rondo, front left
- Steel link material with coated finish for corrosion resistance
- Male threaded ends with 12 mm attachment sizes at both ends
- Greaseable design with grease fittings and dust boot included
- Metal bearing material and locking nuts included
- Standard replacement grade for suspension repair work
Detailed Description
This Dorman suspension stabilizer bar link kit, part number 542-285, is designed for vehicles that need a replacement sway bar link with OE-style dimensions and hardware interface. The link uses male threaded ends, a steel construction, and a coated finish to support dependable service in the suspension system. For fitment-specific searches, this part is listed for the 2014-2017 Kia Rondo, front left, and the same application is also referenced by cross numbers such as Delphi TC7790 and Mevotech Supreme MS908109.
The design includes grease fittings, a greaseable configuration, a dust boot, metal bearings, and locking nuts. Those details matter when replacing a worn stabilizer bar link on a Kia Rondo because they help restore proper sway bar connection and suspension response without changing the original mounting style. If you are searching for Dorman 542-285 for a 2014 Kia Rondo front left stabilizer link or a 2017 Kia Rondo front left sway bar link, this part matches the listed application.
What It Helps Address
- Clunking or knocking noises from the front suspension
- Excess play in the stabilizer bar connection
- Loose or worn sway bar link joints
- Uneven handling response over bumps and turns
- Suspension noise caused by deteriorated link components
Installation Notes
Verify the vehicle position before installation: this listing is for the front left side on the 2014-2017 Kia Rondo. Confirm the 12 mm end attachment sizes and male threaded end style match the original part before removal. Because the link is greaseable, service access to the fittings should be checked during installation and future maintenance. Always inspect adjacent suspension components, including bushings and mounting points, for wear before completing the repair.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable replacement for the original equipment on the specified vehicles. Part number 542-285 is built to standard replacement specifications for suspension service.
