Dorman 542-467 Suspension Stabilizer Bar Link Kit - Front
Dorman 542-467 Rear Stabilizer Bar Link Kit
Dorman 542-467 is a rear suspension stabilizer bar link kit built as a direct replacement for the original equipment link on specific vehicles. It is engineered and tested for dependable suspension service on the 2010-2014 Subaru Legacy, rear, with fitment focused on restoring proper sway bar connection and rear-end stability.
Key Features
- Direct replacement stabilizer bar link kit for rear suspension service
- Fits 2010-2014 Subaru Legacy, rear
- Steel link construction with coated finish
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings included
- Dust boot included to help protect internal components
- Polymer bearing material for suspension articulation
- Locking nuts included for the specified application
- Part number: 542-467
Detailed Description
This Dorman stabilizer bar link is designed for rear suspension use on the Subaru Legacy from 2010 through 2014. The link connects the stabilizer bar to the suspension assembly, helping maintain consistent sway bar action during cornering and over uneven pavement. For buyers searching for a rear sway bar link for 2010-2014 Subaru Legacy models, Dorman 542-467 provides an OE-style replacement built around the listed dimensions and attachment style. This part cross-references MOOG Chassis Products K750422 for the same application.
The design includes steel link material, male threaded ends, a coated finish, and greaseable service points. The dust boot, grease fittings, polymer bearings, and locking nuts are listed features of the assembly. Dorman 542-467 is a practical choice when replacing a worn rear stabilizer link on a Subaru Legacy and when restoring normal suspension response and noise control at the rear of the vehicle.
Common Problems This Part Can Address
- Clunking or rattling from the rear suspension over bumps
- Excessive play in the stabilizer bar connection
- Uneven rear suspension response during cornering
- Worn or damaged rear sway bar link hardware
- Loss of stable rear-end handling feel on the Subaru Legacy
Installation Notes and Tips
Verify rear suspension fitment before installation on 2010-2014 Subaru Legacy models. Confirm the 12 mm attachment size and male threaded end configuration match the vehicle’s original link. Inspect the stabilizer bar bushings, mounting points, and surrounding suspension components for wear before installing the new link. Because this part is greaseable, service the fittings according to the vehicle’s maintenance needs after installation.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable replacement for the original equipment on specific vehicles. Part number 542-467 is built to standard replacement specifications for rear suspension service.
Original: $30.23
-65%$30.23
$10.58Dorman 542-467 Suspension Stabilizer Bar Link Kit - Front
Dorman 542-467 Rear Stabilizer Bar Link Kit
Dorman 542-467 is a rear suspension stabilizer bar link kit built as a direct replacement for the original equipment link on specific vehicles. It is engineered and tested for dependable suspension service on the 2010-2014 Subaru Legacy, rear, with fitment focused on restoring proper sway bar connection and rear-end stability.
Key Features
- Direct replacement stabilizer bar link kit for rear suspension service
- Fits 2010-2014 Subaru Legacy, rear
- Steel link construction with coated finish
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings included
- Dust boot included to help protect internal components
- Polymer bearing material for suspension articulation
- Locking nuts included for the specified application
- Part number: 542-467
Detailed Description
This Dorman stabilizer bar link is designed for rear suspension use on the Subaru Legacy from 2010 through 2014. The link connects the stabilizer bar to the suspension assembly, helping maintain consistent sway bar action during cornering and over uneven pavement. For buyers searching for a rear sway bar link for 2010-2014 Subaru Legacy models, Dorman 542-467 provides an OE-style replacement built around the listed dimensions and attachment style. This part cross-references MOOG Chassis Products K750422 for the same application.
The design includes steel link material, male threaded ends, a coated finish, and greaseable service points. The dust boot, grease fittings, polymer bearings, and locking nuts are listed features of the assembly. Dorman 542-467 is a practical choice when replacing a worn rear stabilizer link on a Subaru Legacy and when restoring normal suspension response and noise control at the rear of the vehicle.
Common Problems This Part Can Address
- Clunking or rattling from the rear suspension over bumps
- Excessive play in the stabilizer bar connection
- Uneven rear suspension response during cornering
- Worn or damaged rear sway bar link hardware
- Loss of stable rear-end handling feel on the Subaru Legacy
Installation Notes and Tips
Verify rear suspension fitment before installation on 2010-2014 Subaru Legacy models. Confirm the 12 mm attachment size and male threaded end configuration match the vehicle’s original link. Inspect the stabilizer bar bushings, mounting points, and surrounding suspension components for wear before installing the new link. Because this part is greaseable, service the fittings according to the vehicle’s maintenance needs after installation.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable replacement for the original equipment on specific vehicles. Part number 542-467 is built to standard replacement specifications for rear suspension service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 542-467 Rear Stabilizer Bar Link Kit
Dorman 542-467 is a rear suspension stabilizer bar link kit built as a direct replacement for the original equipment link on specific vehicles. It is engineered and tested for dependable suspension service on the 2010-2014 Subaru Legacy, rear, with fitment focused on restoring proper sway bar connection and rear-end stability.
Key Features
- Direct replacement stabilizer bar link kit for rear suspension service
- Fits 2010-2014 Subaru Legacy, rear
- Steel link construction with coated finish
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings included
- Dust boot included to help protect internal components
- Polymer bearing material for suspension articulation
- Locking nuts included for the specified application
- Part number: 542-467
Detailed Description
This Dorman stabilizer bar link is designed for rear suspension use on the Subaru Legacy from 2010 through 2014. The link connects the stabilizer bar to the suspension assembly, helping maintain consistent sway bar action during cornering and over uneven pavement. For buyers searching for a rear sway bar link for 2010-2014 Subaru Legacy models, Dorman 542-467 provides an OE-style replacement built around the listed dimensions and attachment style. This part cross-references MOOG Chassis Products K750422 for the same application.
The design includes steel link material, male threaded ends, a coated finish, and greaseable service points. The dust boot, grease fittings, polymer bearings, and locking nuts are listed features of the assembly. Dorman 542-467 is a practical choice when replacing a worn rear stabilizer link on a Subaru Legacy and when restoring normal suspension response and noise control at the rear of the vehicle.
Common Problems This Part Can Address
- Clunking or rattling from the rear suspension over bumps
- Excessive play in the stabilizer bar connection
- Uneven rear suspension response during cornering
- Worn or damaged rear sway bar link hardware
- Loss of stable rear-end handling feel on the Subaru Legacy
Installation Notes and Tips
Verify rear suspension fitment before installation on 2010-2014 Subaru Legacy models. Confirm the 12 mm attachment size and male threaded end configuration match the vehicle’s original link. Inspect the stabilizer bar bushings, mounting points, and surrounding suspension components for wear before installing the new link. Because this part is greaseable, service the fittings according to the vehicle’s maintenance needs after installation.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested to serve as a reliable replacement for the original equipment on specific vehicles. Part number 542-467 is built to standard replacement specifications for rear suspension service.
