Dorman 542-519 Suspension Stabilizer Bar Link Kit - Front
Dorman 542-519 Rear Stabilizer Bar Link Kit
Dorman 542-519 is a rear suspension stabilizer bar link kit built for specific Toyota, Scion, and Prius C applications. It is precision-engineered and tested to replace the original equipment link on the listed vehicles, with a coated finish, male threaded ends, grease fittings, and locking nuts for serviceable rear suspension repair.
Key Features
- Direct replacement stabilizer bar link kit for rear suspension service
- Fits 2012-2019 Toyota Prius C, rear; 2006-2019 Toyota Yaris, rear; and 2008-2014 Scion xD, rear
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings and dust boot included
- Polymer bearing material with coated finish for corrosion resistance
- Performance grade construction for OE-style suspension repair
- Locking nuts included; adjustable, bushings, sleeves, bolts, washers, and pre-greasing are not included
Detailed Description
This Dorman suspension stabilizer bar link kit, part number 542-519, is made for rear suspension applications on the Toyota Prius C, Toyota Yaris, and Scion xD listed in the fitment data. It uses male threaded ends, M1.25 bolt thread pitch, and 12 mm end attachment sizes to match the original equipment style connection points. The greaseable design, dust boot, and polymer bearing material support routine suspension service where a worn sway bar link can create looseness or noise in the rear suspension.
This part cross-references MOOG Chassis Products K80879 for the same application. Dorman 542-519 also aligns with OE-style replacement needs for drivers searching for a rear sway bar link for 2006-2019 Toyota Yaris, 2008-2014 Scion xD, or 2012-2019 Toyota Prius C.
Common Problems This Part Can Address
- Rear suspension clunking or rattling over bumps
- Excess play in the stabilizer bar connection
- Worn or damaged sway bar link hardware at the rear axle
- Noise caused by deteriorated link joints or boots
- Restoring stable rear anti-roll bar operation on the listed vehicles
Installation Notes and Tips
Verify rear fitment by year, make, and model before installation. Inspect the stabilizer bar, mounting points, and adjacent suspension components for wear before replacing the link. Because this link uses male threaded ends and locking nuts, confirm thread pitch and attachment size match the vehicle’s original configuration. Torque fasteners to the vehicle manufacturer’s specification after installation.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested for reliable replacement of the original equipment on specific vehicles. Part number 542-519 is built as a performance-grade suspension service component for the listed rear applications.
Dorman 542-519 Suspension Stabilizer Bar Link Kit - Front
Dorman 542-519 Rear Stabilizer Bar Link Kit
Dorman 542-519 is a rear suspension stabilizer bar link kit built for specific Toyota, Scion, and Prius C applications. It is precision-engineered and tested to replace the original equipment link on the listed vehicles, with a coated finish, male threaded ends, grease fittings, and locking nuts for serviceable rear suspension repair.
Key Features
- Direct replacement stabilizer bar link kit for rear suspension service
- Fits 2012-2019 Toyota Prius C, rear; 2006-2019 Toyota Yaris, rear; and 2008-2014 Scion xD, rear
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings and dust boot included
- Polymer bearing material with coated finish for corrosion resistance
- Performance grade construction for OE-style suspension repair
- Locking nuts included; adjustable, bushings, sleeves, bolts, washers, and pre-greasing are not included
Detailed Description
This Dorman suspension stabilizer bar link kit, part number 542-519, is made for rear suspension applications on the Toyota Prius C, Toyota Yaris, and Scion xD listed in the fitment data. It uses male threaded ends, M1.25 bolt thread pitch, and 12 mm end attachment sizes to match the original equipment style connection points. The greaseable design, dust boot, and polymer bearing material support routine suspension service where a worn sway bar link can create looseness or noise in the rear suspension.
This part cross-references MOOG Chassis Products K80879 for the same application. Dorman 542-519 also aligns with OE-style replacement needs for drivers searching for a rear sway bar link for 2006-2019 Toyota Yaris, 2008-2014 Scion xD, or 2012-2019 Toyota Prius C.
Common Problems This Part Can Address
- Rear suspension clunking or rattling over bumps
- Excess play in the stabilizer bar connection
- Worn or damaged sway bar link hardware at the rear axle
- Noise caused by deteriorated link joints or boots
- Restoring stable rear anti-roll bar operation on the listed vehicles
Installation Notes and Tips
Verify rear fitment by year, make, and model before installation. Inspect the stabilizer bar, mounting points, and adjacent suspension components for wear before replacing the link. Because this link uses male threaded ends and locking nuts, confirm thread pitch and attachment size match the vehicle’s original configuration. Torque fasteners to the vehicle manufacturer’s specification after installation.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested for reliable replacement of the original equipment on specific vehicles. Part number 542-519 is built as a performance-grade suspension service component for the listed rear applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 542-519 Rear Stabilizer Bar Link Kit
Dorman 542-519 is a rear suspension stabilizer bar link kit built for specific Toyota, Scion, and Prius C applications. It is precision-engineered and tested to replace the original equipment link on the listed vehicles, with a coated finish, male threaded ends, grease fittings, and locking nuts for serviceable rear suspension repair.
Key Features
- Direct replacement stabilizer bar link kit for rear suspension service
- Fits 2012-2019 Toyota Prius C, rear; 2006-2019 Toyota Yaris, rear; and 2008-2014 Scion xD, rear
- Male threaded ends with 12 mm attachment size at both ends
- Greaseable design with grease fittings and dust boot included
- Polymer bearing material with coated finish for corrosion resistance
- Performance grade construction for OE-style suspension repair
- Locking nuts included; adjustable, bushings, sleeves, bolts, washers, and pre-greasing are not included
Detailed Description
This Dorman suspension stabilizer bar link kit, part number 542-519, is made for rear suspension applications on the Toyota Prius C, Toyota Yaris, and Scion xD listed in the fitment data. It uses male threaded ends, M1.25 bolt thread pitch, and 12 mm end attachment sizes to match the original equipment style connection points. The greaseable design, dust boot, and polymer bearing material support routine suspension service where a worn sway bar link can create looseness or noise in the rear suspension.
This part cross-references MOOG Chassis Products K80879 for the same application. Dorman 542-519 also aligns with OE-style replacement needs for drivers searching for a rear sway bar link for 2006-2019 Toyota Yaris, 2008-2014 Scion xD, or 2012-2019 Toyota Prius C.
Common Problems This Part Can Address
- Rear suspension clunking or rattling over bumps
- Excess play in the stabilizer bar connection
- Worn or damaged sway bar link hardware at the rear axle
- Noise caused by deteriorated link joints or boots
- Restoring stable rear anti-roll bar operation on the listed vehicles
Installation Notes and Tips
Verify rear fitment by year, make, and model before installation. Inspect the stabilizer bar, mounting points, and adjacent suspension components for wear before replacing the link. Because this link uses male threaded ends and locking nuts, confirm thread pitch and attachment size match the vehicle’s original configuration. Torque fasteners to the vehicle manufacturer’s specification after installation.
Quality Assurance
Dorman states that this stabilizer bar link kit is precision-engineered and rigorously tested for reliable replacement of the original equipment on specific vehicles. Part number 542-519 is built as a performance-grade suspension service component for the listed rear applications.
