Dorman 542-665 Suspension Stabilizer Bar Link Kit - Rear
Dorman 542-665 Rear Stabilizer Bar Link Kit
Dorman 542-665 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment on select vehicles. It is precision-engineered and tested for dependable fit and function on the rear suspension of 2012-2014 Ford Mustang models with an 18.30 mm diameter bar.
For shoppers searching for a rear sway bar link for Ford Mustang, this Dorman 542-665 part number is a direct-fit OE-style solution for restoring stabilizer bar connection performance. It also cross-references MOOG Chassis Products K750137 for the same application.
Key Features
- Rear suspension stabilizer bar link kit for 2012-2014 Ford Mustang
- Standard replacement design for OE-style fit and function
- Threaded end on one side and bushing end on the other
- Greaseable design with grease fittings included
- Coated finish for added surface protection
- Metal bearing material with rubber and steel bushing construction
- Dust boot and locking nuts included
- Not pre-greased
Detailed Description
The Dorman 542-665 rear stabilizer bar link kit is engineered for the rear suspension on 2012, 2013, and 2014 Ford Mustang models equipped with an 18.30 mm diameter bar. It is built to replace the original stabilizer bar link assembly with a standard replacement design that uses a threaded connection at one end and a bushing connection at the other. The coated finish, greaseable construction, and included dust boot support long-term service in suspension applications where consistent bar linkage matters.
This part number, 542-665, is a practical choice for drivers and technicians looking for a rear sway bar link for Ford Mustang applications that match the listed OE configuration. Dorman 542-665 also aligns with interchange references including Delphi TC5597 and MOOG Chassis Products K750137.
What It Helps Address
- Clunking or rattling from the rear suspension
- Loose or worn stabilizer bar link connection points
- Reduced sway bar response during cornering
- Excess movement caused by deteriorated bushings
- Service replacement for a damaged rear link assembly
Installation Notes and Tips
Verify rear fitment against the vehicle’s stabilizer bar diameter before installation. This application uses a 12.3 mm end attachment size on one side and a 20 mm end attachment size on the other, with a 174.5 mm overall length. The kit is not adjustable, and it is not pre-greased, so lubrication should be addressed during service. Confirm that the vehicle matches the listed 2012-2014 Ford Mustang rear application with an 18.30 mm diameter bar.
Quality Assurance
Dorman states that this suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement performance for the original equipment on specific vehicles. The part is built as a standard replacement for the listed application and is backed by Dorman’s OE-style replacement focus.
Dorman 542-665 Suspension Stabilizer Bar Link Kit - Rear
Dorman 542-665 Rear Stabilizer Bar Link Kit
Dorman 542-665 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment on select vehicles. It is precision-engineered and tested for dependable fit and function on the rear suspension of 2012-2014 Ford Mustang models with an 18.30 mm diameter bar.
For shoppers searching for a rear sway bar link for Ford Mustang, this Dorman 542-665 part number is a direct-fit OE-style solution for restoring stabilizer bar connection performance. It also cross-references MOOG Chassis Products K750137 for the same application.
Key Features
- Rear suspension stabilizer bar link kit for 2012-2014 Ford Mustang
- Standard replacement design for OE-style fit and function
- Threaded end on one side and bushing end on the other
- Greaseable design with grease fittings included
- Coated finish for added surface protection
- Metal bearing material with rubber and steel bushing construction
- Dust boot and locking nuts included
- Not pre-greased
Detailed Description
The Dorman 542-665 rear stabilizer bar link kit is engineered for the rear suspension on 2012, 2013, and 2014 Ford Mustang models equipped with an 18.30 mm diameter bar. It is built to replace the original stabilizer bar link assembly with a standard replacement design that uses a threaded connection at one end and a bushing connection at the other. The coated finish, greaseable construction, and included dust boot support long-term service in suspension applications where consistent bar linkage matters.
This part number, 542-665, is a practical choice for drivers and technicians looking for a rear sway bar link for Ford Mustang applications that match the listed OE configuration. Dorman 542-665 also aligns with interchange references including Delphi TC5597 and MOOG Chassis Products K750137.
What It Helps Address
- Clunking or rattling from the rear suspension
- Loose or worn stabilizer bar link connection points
- Reduced sway bar response during cornering
- Excess movement caused by deteriorated bushings
- Service replacement for a damaged rear link assembly
Installation Notes and Tips
Verify rear fitment against the vehicle’s stabilizer bar diameter before installation. This application uses a 12.3 mm end attachment size on one side and a 20 mm end attachment size on the other, with a 174.5 mm overall length. The kit is not adjustable, and it is not pre-greased, so lubrication should be addressed during service. Confirm that the vehicle matches the listed 2012-2014 Ford Mustang rear application with an 18.30 mm diameter bar.
Quality Assurance
Dorman states that this suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement performance for the original equipment on specific vehicles. The part is built as a standard replacement for the listed application and is backed by Dorman’s OE-style replacement focus.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 542-665 Rear Stabilizer Bar Link Kit
Dorman 542-665 is a rear suspension stabilizer bar link kit built as a standard replacement for the original equipment on select vehicles. It is precision-engineered and tested for dependable fit and function on the rear suspension of 2012-2014 Ford Mustang models with an 18.30 mm diameter bar.
For shoppers searching for a rear sway bar link for Ford Mustang, this Dorman 542-665 part number is a direct-fit OE-style solution for restoring stabilizer bar connection performance. It also cross-references MOOG Chassis Products K750137 for the same application.
Key Features
- Rear suspension stabilizer bar link kit for 2012-2014 Ford Mustang
- Standard replacement design for OE-style fit and function
- Threaded end on one side and bushing end on the other
- Greaseable design with grease fittings included
- Coated finish for added surface protection
- Metal bearing material with rubber and steel bushing construction
- Dust boot and locking nuts included
- Not pre-greased
Detailed Description
The Dorman 542-665 rear stabilizer bar link kit is engineered for the rear suspension on 2012, 2013, and 2014 Ford Mustang models equipped with an 18.30 mm diameter bar. It is built to replace the original stabilizer bar link assembly with a standard replacement design that uses a threaded connection at one end and a bushing connection at the other. The coated finish, greaseable construction, and included dust boot support long-term service in suspension applications where consistent bar linkage matters.
This part number, 542-665, is a practical choice for drivers and technicians looking for a rear sway bar link for Ford Mustang applications that match the listed OE configuration. Dorman 542-665 also aligns with interchange references including Delphi TC5597 and MOOG Chassis Products K750137.
What It Helps Address
- Clunking or rattling from the rear suspension
- Loose or worn stabilizer bar link connection points
- Reduced sway bar response during cornering
- Excess movement caused by deteriorated bushings
- Service replacement for a damaged rear link assembly
Installation Notes and Tips
Verify rear fitment against the vehicle’s stabilizer bar diameter before installation. This application uses a 12.3 mm end attachment size on one side and a 20 mm end attachment size on the other, with a 174.5 mm overall length. The kit is not adjustable, and it is not pre-greased, so lubrication should be addressed during service. Confirm that the vehicle matches the listed 2012-2014 Ford Mustang rear application with an 18.30 mm diameter bar.
Quality Assurance
Dorman states that this suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement performance for the original equipment on specific vehicles. The part is built as a standard replacement for the listed application and is backed by Dorman’s OE-style replacement focus.
