Dorman 543-812 Steering Tie Rod End - Front Inner
Dorman 543-812 Front Inner Tie Rod End
Dorman 543-812 is a threaded steering tie rod end for the front inner position on select Chevrolet, GMC, Oldsmobile, Buick, Cadillac, and Isuzu applications. It directly replaces the original equipment tie rod end and is built for smooth, safe steering response on vehicles such as the Chevrolet S10, GMC Jimmy, and Oldsmobile Bravada.
Key Features
- Direct replacement steering tie rod end for specific front inner applications
- Threaded design with female and male end configurations
- Steel housing with powder-coated finish
- Polymer bearing material and polychloroprene dust boot material
- Grease fitting included for serviceable maintenance
- Mounting hardware included
- Length: 115
- Part number: 543-812
Detailed Description
This Dorman steering tie rod end is engineered as an OE-style replacement for front inner steering service on a wide range of vehicles, including 1995-2005 Chevrolet Blazer, 1992-2005 GMC Jimmy, 1983-2004 Chevrolet S10, and 1991-2004 GMC Sonoma. It also covers applications such as the 1996-2001 Oldsmobile Bravada and select Isuzu Hombre models. The steel housing, powder-coated finish, and serviceable grease fitting support dependable steering system operation, while the polymer bearing and polychloroprene boot help protect internal components from contamination.
This part cross-references MOOG Chassis Products ES2072RLT and Delphi TA2268 for the same application. Use Dorman 543-812 when replacing a worn front inner tie rod end on compatible Chevrolet S10 and GMC Sonoma steering systems, or on other listed front inner applications.
What It Helps Address
- Steering play or looseness at the front inner tie rod end
- Clunking or knocking from worn steering linkage components
- Uneven tire wear caused by excessive steering free play
- Imprecise steering feel during lane changes or turns
- Contamination-related wear in the steering joint
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and front inner position before installation. Match the threaded configuration and inspect adjacent steering components, including the outer tie rod ends and alignment settings, whenever replacing a tie rod end. After installation, a professional wheel alignment is recommended to restore proper steering geometry.
Quality Assurance
Dorman subjects this steering tie rod end to an industry-level evaluation process to confirm smooth, safe operation in the specified applications. The part is built to replace the original equipment tie rod end on the listed vehicles and is intended to meet the demands of routine steering service.
Compatible Vehicles
- Fits 1995-2005 Chevrolet Blazer, front inner
- Fits 1992-2005 GMC Jimmy, front inner
- Fits 1983-2004 Chevrolet S10, front inner
- Fits 1991-2004 GMC Sonoma, front inner
- Fits 1996-2001 Oldsmobile Bravada, front inner
- Fits 1991-1994 Oldsmobile Bravada, front inner
- Fits 1999-2000 Isuzu Hombre, front inner
- Fits 1998 Isuzu Hombre, front inner, w/Offset Tie Rod
- Fits 1983-1994 Chevrolet S10 Blazer, front inner
- Fits 1983-1991 GMC S15 Jimmy, front inner
- Fits 1983-1990 GMC S15, front inner
- Fits 1979-1985 Buick Riviera, front inner
- Fits 1979-1985 Cadillac Eldorado, front inner
- Fits 1980-1985 Cadillac Seville, front inner
- Fits 1979-1985 Oldsmobile Toronado, front inner
Original: $47.46
-65%$47.46
$16.61Dorman 543-812 Steering Tie Rod End - Front Inner
Dorman 543-812 Front Inner Tie Rod End
Dorman 543-812 is a threaded steering tie rod end for the front inner position on select Chevrolet, GMC, Oldsmobile, Buick, Cadillac, and Isuzu applications. It directly replaces the original equipment tie rod end and is built for smooth, safe steering response on vehicles such as the Chevrolet S10, GMC Jimmy, and Oldsmobile Bravada.
Key Features
- Direct replacement steering tie rod end for specific front inner applications
- Threaded design with female and male end configurations
- Steel housing with powder-coated finish
- Polymer bearing material and polychloroprene dust boot material
- Grease fitting included for serviceable maintenance
- Mounting hardware included
- Length: 115
- Part number: 543-812
Detailed Description
This Dorman steering tie rod end is engineered as an OE-style replacement for front inner steering service on a wide range of vehicles, including 1995-2005 Chevrolet Blazer, 1992-2005 GMC Jimmy, 1983-2004 Chevrolet S10, and 1991-2004 GMC Sonoma. It also covers applications such as the 1996-2001 Oldsmobile Bravada and select Isuzu Hombre models. The steel housing, powder-coated finish, and serviceable grease fitting support dependable steering system operation, while the polymer bearing and polychloroprene boot help protect internal components from contamination.
This part cross-references MOOG Chassis Products ES2072RLT and Delphi TA2268 for the same application. Use Dorman 543-812 when replacing a worn front inner tie rod end on compatible Chevrolet S10 and GMC Sonoma steering systems, or on other listed front inner applications.
What It Helps Address
- Steering play or looseness at the front inner tie rod end
- Clunking or knocking from worn steering linkage components
- Uneven tire wear caused by excessive steering free play
- Imprecise steering feel during lane changes or turns
- Contamination-related wear in the steering joint
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and front inner position before installation. Match the threaded configuration and inspect adjacent steering components, including the outer tie rod ends and alignment settings, whenever replacing a tie rod end. After installation, a professional wheel alignment is recommended to restore proper steering geometry.
Quality Assurance
Dorman subjects this steering tie rod end to an industry-level evaluation process to confirm smooth, safe operation in the specified applications. The part is built to replace the original equipment tie rod end on the listed vehicles and is intended to meet the demands of routine steering service.
Compatible Vehicles
- Fits 1995-2005 Chevrolet Blazer, front inner
- Fits 1992-2005 GMC Jimmy, front inner
- Fits 1983-2004 Chevrolet S10, front inner
- Fits 1991-2004 GMC Sonoma, front inner
- Fits 1996-2001 Oldsmobile Bravada, front inner
- Fits 1991-1994 Oldsmobile Bravada, front inner
- Fits 1999-2000 Isuzu Hombre, front inner
- Fits 1998 Isuzu Hombre, front inner, w/Offset Tie Rod
- Fits 1983-1994 Chevrolet S10 Blazer, front inner
- Fits 1983-1991 GMC S15 Jimmy, front inner
- Fits 1983-1990 GMC S15, front inner
- Fits 1979-1985 Buick Riviera, front inner
- Fits 1979-1985 Cadillac Eldorado, front inner
- Fits 1980-1985 Cadillac Seville, front inner
- Fits 1979-1985 Oldsmobile Toronado, front inner
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 543-812 Front Inner Tie Rod End
Dorman 543-812 is a threaded steering tie rod end for the front inner position on select Chevrolet, GMC, Oldsmobile, Buick, Cadillac, and Isuzu applications. It directly replaces the original equipment tie rod end and is built for smooth, safe steering response on vehicles such as the Chevrolet S10, GMC Jimmy, and Oldsmobile Bravada.
Key Features
- Direct replacement steering tie rod end for specific front inner applications
- Threaded design with female and male end configurations
- Steel housing with powder-coated finish
- Polymer bearing material and polychloroprene dust boot material
- Grease fitting included for serviceable maintenance
- Mounting hardware included
- Length: 115
- Part number: 543-812
Detailed Description
This Dorman steering tie rod end is engineered as an OE-style replacement for front inner steering service on a wide range of vehicles, including 1995-2005 Chevrolet Blazer, 1992-2005 GMC Jimmy, 1983-2004 Chevrolet S10, and 1991-2004 GMC Sonoma. It also covers applications such as the 1996-2001 Oldsmobile Bravada and select Isuzu Hombre models. The steel housing, powder-coated finish, and serviceable grease fitting support dependable steering system operation, while the polymer bearing and polychloroprene boot help protect internal components from contamination.
This part cross-references MOOG Chassis Products ES2072RLT and Delphi TA2268 for the same application. Use Dorman 543-812 when replacing a worn front inner tie rod end on compatible Chevrolet S10 and GMC Sonoma steering systems, or on other listed front inner applications.
What It Helps Address
- Steering play or looseness at the front inner tie rod end
- Clunking or knocking from worn steering linkage components
- Uneven tire wear caused by excessive steering free play
- Imprecise steering feel during lane changes or turns
- Contamination-related wear in the steering joint
Installation Notes and Tips
Verify vehicle fitment by year, make, model, and front inner position before installation. Match the threaded configuration and inspect adjacent steering components, including the outer tie rod ends and alignment settings, whenever replacing a tie rod end. After installation, a professional wheel alignment is recommended to restore proper steering geometry.
Quality Assurance
Dorman subjects this steering tie rod end to an industry-level evaluation process to confirm smooth, safe operation in the specified applications. The part is built to replace the original equipment tie rod end on the listed vehicles and is intended to meet the demands of routine steering service.
Compatible Vehicles
- Fits 1995-2005 Chevrolet Blazer, front inner
- Fits 1992-2005 GMC Jimmy, front inner
- Fits 1983-2004 Chevrolet S10, front inner
- Fits 1991-2004 GMC Sonoma, front inner
- Fits 1996-2001 Oldsmobile Bravada, front inner
- Fits 1991-1994 Oldsmobile Bravada, front inner
- Fits 1999-2000 Isuzu Hombre, front inner
- Fits 1998 Isuzu Hombre, front inner, w/Offset Tie Rod
- Fits 1983-1994 Chevrolet S10 Blazer, front inner
- Fits 1983-1991 GMC S15 Jimmy, front inner
- Fits 1983-1990 GMC S15, front inner
- Fits 1979-1985 Buick Riviera, front inner
- Fits 1979-1985 Cadillac Eldorado, front inner
- Fits 1980-1985 Cadillac Seville, front inner
- Fits 1979-1985 Oldsmobile Toronado, front inner
