Dorman 544-644 Steering Tie Rod End - Front Right Outer
Dorman 544-644 Steering Tie Rod End
Dorman 544-644 is a straight steering tie rod end built as a direct replacement for the original equipment part on specific applications. It is engineered for smooth, safe steering response and is a fitment-based solution for Cadillac CT4, Cadillac CT5, Chevrolet Camaro, Cadillac ATS, and Cadillac CTS front right outer steering service.
Key Features
- Direct replacement steering tie rod end for select vehicles
- Fits front right outer steering positions on listed applications
- Straight design with female and male end configuration
- Steel housing and steel tie rod construction
- Powder-coated black finish for added surface protection
- Pre-greased design with no grease fitting included
- Polymer bearing material and polychloroprene dust boot material
- Clockwise thread direction on both ends
- End 1 thread diameter: 18 mm, M1.25 pitch
- End 2 thread diameter: 10 mm, M1.25 pitch
Detailed Description
This Dorman steering tie rod end, part number 544-644, is made for direct OE-style replacement on select Cadillac and Chevrolet models. It is designed for the front right outer steering location and supports precise steering linkage service on vehicles such as the 2020-2025 Cadillac CT4, 2020-2025 Cadillac CT5, 2016-2024 Chevrolet Camaro, 2013-2019 Cadillac ATS, and 2014-2019 Cadillac CTS. The assembly uses a steel housing, steel tie rod, polymer bearing material, and a polychloroprene dust boot to match the demands of everyday steering operation. This part cross-references MOOG Chassis Products ES801232 and Delphi TA6438 for the same application.
What It Helps Fix
- Loose or imprecise steering feel at the front right outer linkage
- Clunking or play caused by worn tie rod end components
- Uneven steering response during lane changes or turns
- Steering service needs on Cadillac CT4, Cadillac CT5, Chevrolet Camaro, Cadillac ATS, and Cadillac CTS
- Replacement of a worn OE tie rod end on the listed fitments
Installation Notes and Tips
Verify the front right outer position, thread sizes, and vehicle application before installation. Because this part is pre-greased and does not include a grease fitting, no routine grease service is required at the fitting point. After installation, a professional wheel alignment is recommended to restore steering geometry and tire wear characteristics.
Quality Assurance
Dorman evaluates this steering tie rod end through an industry-focused validation process to help ensure consistent steering operation and dependable replacement performance. Part number 544-644 is built for direct replacement use on the specified Cadillac and Chevrolet applications.
Dorman 544-644 Steering Tie Rod End - Front Right Outer
Dorman 544-644 Steering Tie Rod End
Dorman 544-644 is a straight steering tie rod end built as a direct replacement for the original equipment part on specific applications. It is engineered for smooth, safe steering response and is a fitment-based solution for Cadillac CT4, Cadillac CT5, Chevrolet Camaro, Cadillac ATS, and Cadillac CTS front right outer steering service.
Key Features
- Direct replacement steering tie rod end for select vehicles
- Fits front right outer steering positions on listed applications
- Straight design with female and male end configuration
- Steel housing and steel tie rod construction
- Powder-coated black finish for added surface protection
- Pre-greased design with no grease fitting included
- Polymer bearing material and polychloroprene dust boot material
- Clockwise thread direction on both ends
- End 1 thread diameter: 18 mm, M1.25 pitch
- End 2 thread diameter: 10 mm, M1.25 pitch
Detailed Description
This Dorman steering tie rod end, part number 544-644, is made for direct OE-style replacement on select Cadillac and Chevrolet models. It is designed for the front right outer steering location and supports precise steering linkage service on vehicles such as the 2020-2025 Cadillac CT4, 2020-2025 Cadillac CT5, 2016-2024 Chevrolet Camaro, 2013-2019 Cadillac ATS, and 2014-2019 Cadillac CTS. The assembly uses a steel housing, steel tie rod, polymer bearing material, and a polychloroprene dust boot to match the demands of everyday steering operation. This part cross-references MOOG Chassis Products ES801232 and Delphi TA6438 for the same application.
What It Helps Fix
- Loose or imprecise steering feel at the front right outer linkage
- Clunking or play caused by worn tie rod end components
- Uneven steering response during lane changes or turns
- Steering service needs on Cadillac CT4, Cadillac CT5, Chevrolet Camaro, Cadillac ATS, and Cadillac CTS
- Replacement of a worn OE tie rod end on the listed fitments
Installation Notes and Tips
Verify the front right outer position, thread sizes, and vehicle application before installation. Because this part is pre-greased and does not include a grease fitting, no routine grease service is required at the fitting point. After installation, a professional wheel alignment is recommended to restore steering geometry and tire wear characteristics.
Quality Assurance
Dorman evaluates this steering tie rod end through an industry-focused validation process to help ensure consistent steering operation and dependable replacement performance. Part number 544-644 is built for direct replacement use on the specified Cadillac and Chevrolet applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 544-644 Steering Tie Rod End
Dorman 544-644 is a straight steering tie rod end built as a direct replacement for the original equipment part on specific applications. It is engineered for smooth, safe steering response and is a fitment-based solution for Cadillac CT4, Cadillac CT5, Chevrolet Camaro, Cadillac ATS, and Cadillac CTS front right outer steering service.
Key Features
- Direct replacement steering tie rod end for select vehicles
- Fits front right outer steering positions on listed applications
- Straight design with female and male end configuration
- Steel housing and steel tie rod construction
- Powder-coated black finish for added surface protection
- Pre-greased design with no grease fitting included
- Polymer bearing material and polychloroprene dust boot material
- Clockwise thread direction on both ends
- End 1 thread diameter: 18 mm, M1.25 pitch
- End 2 thread diameter: 10 mm, M1.25 pitch
Detailed Description
This Dorman steering tie rod end, part number 544-644, is made for direct OE-style replacement on select Cadillac and Chevrolet models. It is designed for the front right outer steering location and supports precise steering linkage service on vehicles such as the 2020-2025 Cadillac CT4, 2020-2025 Cadillac CT5, 2016-2024 Chevrolet Camaro, 2013-2019 Cadillac ATS, and 2014-2019 Cadillac CTS. The assembly uses a steel housing, steel tie rod, polymer bearing material, and a polychloroprene dust boot to match the demands of everyday steering operation. This part cross-references MOOG Chassis Products ES801232 and Delphi TA6438 for the same application.
What It Helps Fix
- Loose or imprecise steering feel at the front right outer linkage
- Clunking or play caused by worn tie rod end components
- Uneven steering response during lane changes or turns
- Steering service needs on Cadillac CT4, Cadillac CT5, Chevrolet Camaro, Cadillac ATS, and Cadillac CTS
- Replacement of a worn OE tie rod end on the listed fitments
Installation Notes and Tips
Verify the front right outer position, thread sizes, and vehicle application before installation. Because this part is pre-greased and does not include a grease fitting, no routine grease service is required at the fitting point. After installation, a professional wheel alignment is recommended to restore steering geometry and tire wear characteristics.
Quality Assurance
Dorman evaluates this steering tie rod end through an industry-focused validation process to help ensure consistent steering operation and dependable replacement performance. Part number 544-644 is built for direct replacement use on the specified Cadillac and Chevrolet applications.
