Dorman 622-062 Brake Hydraulic Hose - Rear Center
Lifted Wrangler Rear Brake Hose
Dorman 622-062 is a braided steel brake hydraulic hose for lifted Jeep Wrangler applications. It is 4 inches longer than the original equipment hose to accommodate raised suspension setups, and the stainless steel braid adds protection for off-road use.
Compatible With 1990-1995 Jeep Wrangler, rear center. The Dorman 622-062 brake hose is DOT approved and built with steel male and female ends, inverted flares, and a gray finish for a clean, service-ready appearance.
Key Features
- Fits 1990-1995 Jeep Wrangler, rear center
- 4 inches longer than the OE hose for lifted suspension applications
- Braided stainless steel construction for added abrasion resistance
- DOT approved for road use
- Steel end fittings with inverted flare design
- Includes a special breakaway hose hanger clip and zip ties for hose management
- Overall length: 21.65 in.
- Part number: 622-062
Detailed Description
This Dorman brake hydraulic hose is engineered for Jeep Wrangler models with raised suspension systems that need extra hose length at the rear center position. The braided steel and PTFE-style hose construction helps resist trail hazards, while the breakaway hanger clip is designed to release if the hose snags an obstacle, helping reduce the risk of brake fluid pressure loss. For shoppers searching for a lifted Jeep Wrangler rear brake hose, braided steel brake line, or Dorman 622-062 replacement, this part addresses those needs with a direct-fit design for the listed vehicles.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Solve
- Brake hose tension caused by suspension lift
- Restricted rear brake line movement during articulation
- Exposure to trail debris and abrasion
- Risk of hose snagging on off-road obstacles
- Brake fluid pressure loss from damaged hose routing
Installation Notes and Tips
Verify routing, fitting orientation, and rear center placement before installation. Inspect adjacent brake components, hard lines, and mounting points for wear or damage, and confirm the hose clears the suspension through full travel. Use the supplied hose management pieces as directed by the vehicle setup and follow proper brake bleeding procedures after service.
Quality Assurance
Dorman designs this hose as a DOT approved replacement for the specified Jeep Wrangler applications. The braided steel construction, inverted flare fittings, and breakaway clip reflect a service-focused design for brake system reliability on lifted vehicles.
Dorman 622-062 Brake Hydraulic Hose - Rear Center
Lifted Wrangler Rear Brake Hose
Dorman 622-062 is a braided steel brake hydraulic hose for lifted Jeep Wrangler applications. It is 4 inches longer than the original equipment hose to accommodate raised suspension setups, and the stainless steel braid adds protection for off-road use.
Compatible With 1990-1995 Jeep Wrangler, rear center. The Dorman 622-062 brake hose is DOT approved and built with steel male and female ends, inverted flares, and a gray finish for a clean, service-ready appearance.
Key Features
- Fits 1990-1995 Jeep Wrangler, rear center
- 4 inches longer than the OE hose for lifted suspension applications
- Braided stainless steel construction for added abrasion resistance
- DOT approved for road use
- Steel end fittings with inverted flare design
- Includes a special breakaway hose hanger clip and zip ties for hose management
- Overall length: 21.65 in.
- Part number: 622-062
Detailed Description
This Dorman brake hydraulic hose is engineered for Jeep Wrangler models with raised suspension systems that need extra hose length at the rear center position. The braided steel and PTFE-style hose construction helps resist trail hazards, while the breakaway hanger clip is designed to release if the hose snags an obstacle, helping reduce the risk of brake fluid pressure loss. For shoppers searching for a lifted Jeep Wrangler rear brake hose, braided steel brake line, or Dorman 622-062 replacement, this part addresses those needs with a direct-fit design for the listed vehicles.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Solve
- Brake hose tension caused by suspension lift
- Restricted rear brake line movement during articulation
- Exposure to trail debris and abrasion
- Risk of hose snagging on off-road obstacles
- Brake fluid pressure loss from damaged hose routing
Installation Notes and Tips
Verify routing, fitting orientation, and rear center placement before installation. Inspect adjacent brake components, hard lines, and mounting points for wear or damage, and confirm the hose clears the suspension through full travel. Use the supplied hose management pieces as directed by the vehicle setup and follow proper brake bleeding procedures after service.
Quality Assurance
Dorman designs this hose as a DOT approved replacement for the specified Jeep Wrangler applications. The braided steel construction, inverted flare fittings, and breakaway clip reflect a service-focused design for brake system reliability on lifted vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Lifted Wrangler Rear Brake Hose
Dorman 622-062 is a braided steel brake hydraulic hose for lifted Jeep Wrangler applications. It is 4 inches longer than the original equipment hose to accommodate raised suspension setups, and the stainless steel braid adds protection for off-road use.
Compatible With 1990-1995 Jeep Wrangler, rear center. The Dorman 622-062 brake hose is DOT approved and built with steel male and female ends, inverted flares, and a gray finish for a clean, service-ready appearance.
Key Features
- Fits 1990-1995 Jeep Wrangler, rear center
- 4 inches longer than the OE hose for lifted suspension applications
- Braided stainless steel construction for added abrasion resistance
- DOT approved for road use
- Steel end fittings with inverted flare design
- Includes a special breakaway hose hanger clip and zip ties for hose management
- Overall length: 21.65 in.
- Part number: 622-062
Detailed Description
This Dorman brake hydraulic hose is engineered for Jeep Wrangler models with raised suspension systems that need extra hose length at the rear center position. The braided steel and PTFE-style hose construction helps resist trail hazards, while the breakaway hanger clip is designed to release if the hose snags an obstacle, helping reduce the risk of brake fluid pressure loss. For shoppers searching for a lifted Jeep Wrangler rear brake hose, braided steel brake line, or Dorman 622-062 replacement, this part addresses those needs with a direct-fit design for the listed vehicles.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Solve
- Brake hose tension caused by suspension lift
- Restricted rear brake line movement during articulation
- Exposure to trail debris and abrasion
- Risk of hose snagging on off-road obstacles
- Brake fluid pressure loss from damaged hose routing
Installation Notes and Tips
Verify routing, fitting orientation, and rear center placement before installation. Inspect adjacent brake components, hard lines, and mounting points for wear or damage, and confirm the hose clears the suspension through full travel. Use the supplied hose management pieces as directed by the vehicle setup and follow proper brake bleeding procedures after service.
Quality Assurance
Dorman designs this hose as a DOT approved replacement for the specified Jeep Wrangler applications. The braided steel construction, inverted flare fittings, and breakaway clip reflect a service-focused design for brake system reliability on lifted vehicles.
