Dorman 622-065 Brake Hydraulic Hose - Front Right
Lifted Jeep Front Brake Hose
Dorman 622-065 is a front right brake hydraulic hose for select Jeep applications with raised suspension. It is 4 inches longer than the original equipment hose and uses a braided stainless steel outer layer for added protection on trail-driven vehicles.
Compatible With 1997-2006 Jeep Wrangler, front right; 1990-2001 Jeep Cherokee, front right; 1993-1998 Jeep Grand Cherokee, front right; and 1990 Jeep Wagoneer, front right. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
- DOT approved brake hose for street-legal use
- Extended length for lifted suspension setups
- Braided stainless steel exterior for abrasion resistance
- Includes a hose hanger breakaway clip to help protect the brake line if it snags on the trail
- Supplied with zip ties for hose routing support
- Silver finish with EPDM rubber outer sleeve construction
Detailed Product Overview
Built for Jeep Wrangler, Cherokee, Grand Cherokee, and Wagoneer front right brake service, Dorman 622-065 replaces the factory hose with a longer flexible line that better accommodates raised ride height. The stainless braided construction adds a protective layer against off-road debris, while the breakaway clip is engineered to release if the hose catches on an obstacle, helping reduce the risk of brake fluid pressure loss. The hose uses a 3/8-24 in. end 1 thread size and a banjo-style end 2 connection with steel fittings.
Common Problems This Part Helps Address
- Brake hose tension after suspension lift installation
- Chafing or abrasion from trail debris
- Restricted front right brake line movement during suspension travel
- Damage from snagging on rocks, branches, or other obstacles
- Brake fluid pressure loss caused by a compromised hose
Installation Notes and Tips
Install on the front right position only for the listed Jeep applications. Verify hose routing, fitting style, and clearance before final tightening. Use the supplied breakaway clip and zip ties to secure the line away from moving suspension components and sharp edges. After installation, inspect for leaks and confirm full steering and suspension travel without contact.
Quality Assurance
Dorman brake hydraulic hoses are built to meet DOT approval requirements and are engineered for direct-fit service on the listed Jeep Wrangler, Cherokee, Grand Cherokee, and Wagoneer applications. Part number 622-065 is designed for dependable replacement use in lifted Jeep brake systems.
Dorman 622-065 Brake Hydraulic Hose - Front Right
Lifted Jeep Front Brake Hose
Dorman 622-065 is a front right brake hydraulic hose for select Jeep applications with raised suspension. It is 4 inches longer than the original equipment hose and uses a braided stainless steel outer layer for added protection on trail-driven vehicles.
Compatible With 1997-2006 Jeep Wrangler, front right; 1990-2001 Jeep Cherokee, front right; 1993-1998 Jeep Grand Cherokee, front right; and 1990 Jeep Wagoneer, front right. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
- DOT approved brake hose for street-legal use
- Extended length for lifted suspension setups
- Braided stainless steel exterior for abrasion resistance
- Includes a hose hanger breakaway clip to help protect the brake line if it snags on the trail
- Supplied with zip ties for hose routing support
- Silver finish with EPDM rubber outer sleeve construction
Detailed Product Overview
Built for Jeep Wrangler, Cherokee, Grand Cherokee, and Wagoneer front right brake service, Dorman 622-065 replaces the factory hose with a longer flexible line that better accommodates raised ride height. The stainless braided construction adds a protective layer against off-road debris, while the breakaway clip is engineered to release if the hose catches on an obstacle, helping reduce the risk of brake fluid pressure loss. The hose uses a 3/8-24 in. end 1 thread size and a banjo-style end 2 connection with steel fittings.
Common Problems This Part Helps Address
- Brake hose tension after suspension lift installation
- Chafing or abrasion from trail debris
- Restricted front right brake line movement during suspension travel
- Damage from snagging on rocks, branches, or other obstacles
- Brake fluid pressure loss caused by a compromised hose
Installation Notes and Tips
Install on the front right position only for the listed Jeep applications. Verify hose routing, fitting style, and clearance before final tightening. Use the supplied breakaway clip and zip ties to secure the line away from moving suspension components and sharp edges. After installation, inspect for leaks and confirm full steering and suspension travel without contact.
Quality Assurance
Dorman brake hydraulic hoses are built to meet DOT approval requirements and are engineered for direct-fit service on the listed Jeep Wrangler, Cherokee, Grand Cherokee, and Wagoneer applications. Part number 622-065 is designed for dependable replacement use in lifted Jeep brake systems.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Lifted Jeep Front Brake Hose
Dorman 622-065 is a front right brake hydraulic hose for select Jeep applications with raised suspension. It is 4 inches longer than the original equipment hose and uses a braided stainless steel outer layer for added protection on trail-driven vehicles.
Compatible With 1997-2006 Jeep Wrangler, front right; 1990-2001 Jeep Cherokee, front right; 1993-1998 Jeep Grand Cherokee, front right; and 1990 Jeep Wagoneer, front right. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
- DOT approved brake hose for street-legal use
- Extended length for lifted suspension setups
- Braided stainless steel exterior for abrasion resistance
- Includes a hose hanger breakaway clip to help protect the brake line if it snags on the trail
- Supplied with zip ties for hose routing support
- Silver finish with EPDM rubber outer sleeve construction
Detailed Product Overview
Built for Jeep Wrangler, Cherokee, Grand Cherokee, and Wagoneer front right brake service, Dorman 622-065 replaces the factory hose with a longer flexible line that better accommodates raised ride height. The stainless braided construction adds a protective layer against off-road debris, while the breakaway clip is engineered to release if the hose catches on an obstacle, helping reduce the risk of brake fluid pressure loss. The hose uses a 3/8-24 in. end 1 thread size and a banjo-style end 2 connection with steel fittings.
Common Problems This Part Helps Address
- Brake hose tension after suspension lift installation
- Chafing or abrasion from trail debris
- Restricted front right brake line movement during suspension travel
- Damage from snagging on rocks, branches, or other obstacles
- Brake fluid pressure loss caused by a compromised hose
Installation Notes and Tips
Install on the front right position only for the listed Jeep applications. Verify hose routing, fitting style, and clearance before final tightening. Use the supplied breakaway clip and zip ties to secure the line away from moving suspension components and sharp edges. After installation, inspect for leaks and confirm full steering and suspension travel without contact.
Quality Assurance
Dorman brake hydraulic hoses are built to meet DOT approval requirements and are engineered for direct-fit service on the listed Jeep Wrangler, Cherokee, Grand Cherokee, and Wagoneer applications. Part number 622-065 is designed for dependable replacement use in lifted Jeep brake systems.
