Dorman 622-072 Brake Hydraulic Hose - Rear Right
Dorman 622-072 Rear Right Brake Hose
Dorman 622-072 is a braided stainless steel brake hydraulic hose for lifted Jeep Wrangler applications. It is built longer than the original equipment hose to accommodate raised suspension setups on the rear right side of the vehicle.
Compatible With 2007-2013 Jeep Wrangler, rear right, this hose is DOT approved and includes a stainless braided outer layer for added protection in off-road conditions. The design also includes a hose hanger breakaway clip to help secure the line and reduce the chance of brake fluid pressure loss if the hose catches on trail obstacles.
Key Features
- Brake hydraulic hose for rear right placement
- Four inches longer than OE for lifted Jeep Wrangler suspension setups
- Braided stainless steel construction for added abrasion resistance
- DOT approved for road use
- Includes a breakaway hose hanger clip to help protect the brake system
- Includes mounting hardware and gasket or seal components listed in the product data
- Part number 622-072 for easy identification
Detailed Description
This Dorman brake hose is engineered for 2007-2013 Jeep Wrangler models with raised suspension systems that need additional hose length at the rear right position. The PTFE and fiber-reinforced hose construction is wrapped in braided stainless steel to help shield the line from rocks, debris, and trail contact. End fittings use a female inverted connection on one end and a banjo-style connection on the other, with a 3/8-24 in thread size at the primary end.
For shoppers searching for a lifted Jeep Wrangler rear brake hose, Jeep Wrangler rear right brake line, or Dorman 622-072 brake hydraulic hose, this part provides a direct fit for the listed application. It is also a practical replacement when the original hose is too short after suspension modifications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Brake hose tension after a suspension lift
- Cracked or worn rear brake hose material
- Brake line abrasion from off-road debris
- Loss of brake fluid pressure caused by hose snagging
- Fitment issues when the OE hose length is no longer sufficient
Installation Notes
Install on the rear right position only for the listed Jeep Wrangler applications. Verify routing, fitting style, and thread engagement before bleeding the brake system. The included breakaway clip and zip ties help secure the hose along the intended path, and the hose should be checked for full suspension travel and steering clearance after installation.
Quality Assurance
Dorman manufactures this brake hose as a DOT approved replacement part for the specified Jeep Wrangler fitment. Part number 622-072 is built to match the listed application requirements and support safe brake system operation on lifted vehicles.
Dorman 622-072 Brake Hydraulic Hose - Rear Right
Dorman 622-072 Rear Right Brake Hose
Dorman 622-072 is a braided stainless steel brake hydraulic hose for lifted Jeep Wrangler applications. It is built longer than the original equipment hose to accommodate raised suspension setups on the rear right side of the vehicle.
Compatible With 2007-2013 Jeep Wrangler, rear right, this hose is DOT approved and includes a stainless braided outer layer for added protection in off-road conditions. The design also includes a hose hanger breakaway clip to help secure the line and reduce the chance of brake fluid pressure loss if the hose catches on trail obstacles.
Key Features
- Brake hydraulic hose for rear right placement
- Four inches longer than OE for lifted Jeep Wrangler suspension setups
- Braided stainless steel construction for added abrasion resistance
- DOT approved for road use
- Includes a breakaway hose hanger clip to help protect the brake system
- Includes mounting hardware and gasket or seal components listed in the product data
- Part number 622-072 for easy identification
Detailed Description
This Dorman brake hose is engineered for 2007-2013 Jeep Wrangler models with raised suspension systems that need additional hose length at the rear right position. The PTFE and fiber-reinforced hose construction is wrapped in braided stainless steel to help shield the line from rocks, debris, and trail contact. End fittings use a female inverted connection on one end and a banjo-style connection on the other, with a 3/8-24 in thread size at the primary end.
For shoppers searching for a lifted Jeep Wrangler rear brake hose, Jeep Wrangler rear right brake line, or Dorman 622-072 brake hydraulic hose, this part provides a direct fit for the listed application. It is also a practical replacement when the original hose is too short after suspension modifications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Brake hose tension after a suspension lift
- Cracked or worn rear brake hose material
- Brake line abrasion from off-road debris
- Loss of brake fluid pressure caused by hose snagging
- Fitment issues when the OE hose length is no longer sufficient
Installation Notes
Install on the rear right position only for the listed Jeep Wrangler applications. Verify routing, fitting style, and thread engagement before bleeding the brake system. The included breakaway clip and zip ties help secure the hose along the intended path, and the hose should be checked for full suspension travel and steering clearance after installation.
Quality Assurance
Dorman manufactures this brake hose as a DOT approved replacement part for the specified Jeep Wrangler fitment. Part number 622-072 is built to match the listed application requirements and support safe brake system operation on lifted vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 622-072 Rear Right Brake Hose
Dorman 622-072 is a braided stainless steel brake hydraulic hose for lifted Jeep Wrangler applications. It is built longer than the original equipment hose to accommodate raised suspension setups on the rear right side of the vehicle.
Compatible With 2007-2013 Jeep Wrangler, rear right, this hose is DOT approved and includes a stainless braided outer layer for added protection in off-road conditions. The design also includes a hose hanger breakaway clip to help secure the line and reduce the chance of brake fluid pressure loss if the hose catches on trail obstacles.
Key Features
- Brake hydraulic hose for rear right placement
- Four inches longer than OE for lifted Jeep Wrangler suspension setups
- Braided stainless steel construction for added abrasion resistance
- DOT approved for road use
- Includes a breakaway hose hanger clip to help protect the brake system
- Includes mounting hardware and gasket or seal components listed in the product data
- Part number 622-072 for easy identification
Detailed Description
This Dorman brake hose is engineered for 2007-2013 Jeep Wrangler models with raised suspension systems that need additional hose length at the rear right position. The PTFE and fiber-reinforced hose construction is wrapped in braided stainless steel to help shield the line from rocks, debris, and trail contact. End fittings use a female inverted connection on one end and a banjo-style connection on the other, with a 3/8-24 in thread size at the primary end.
For shoppers searching for a lifted Jeep Wrangler rear brake hose, Jeep Wrangler rear right brake line, or Dorman 622-072 brake hydraulic hose, this part provides a direct fit for the listed application. It is also a practical replacement when the original hose is too short after suspension modifications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Brake hose tension after a suspension lift
- Cracked or worn rear brake hose material
- Brake line abrasion from off-road debris
- Loss of brake fluid pressure caused by hose snagging
- Fitment issues when the OE hose length is no longer sufficient
Installation Notes
Install on the rear right position only for the listed Jeep Wrangler applications. Verify routing, fitting style, and thread engagement before bleeding the brake system. The included breakaway clip and zip ties help secure the hose along the intended path, and the hose should be checked for full suspension travel and steering clearance after installation.
Quality Assurance
Dorman manufactures this brake hose as a DOT approved replacement part for the specified Jeep Wrangler fitment. Part number 622-072 is built to match the listed application requirements and support safe brake system operation on lifted vehicles.
