Dorman 622-077 Brake Hydraulic Hose - Rear Left
Dorman 622-077 Rear Left Brake Hose for Jeep Wrangler
Dorman 622-077 is a braided stainless steel brake hydraulic hose for lifted Jeep Wrangler applications. It is 4 inches longer than the original equipment hose and is built for the rear left position on 2003-2006 Jeep Wrangler models with raised suspension systems.
For Jeep Wrangler owners who need a longer rear brake line after a suspension lift, this hose provides the added length and protection needed for off-road use. The stainless braided construction helps shield the hose from trail debris, while the included breakaway hanger clip is engineered to release if the hose snags an obstacle.
Key Features
- Fits 2003-2006 Jeep Wrangler, rear left
- 4 inches longer than the original equipment hose for lifted suspension setups
- Braided stainless steel exterior for added protection from off-road hazards
- DOT approved brake hydraulic hose
- Steel female end 1 with inverted flare and 3/8-24 in. thread size
- Steel banjo end 2 with open flare and 9.6 mm inside diameter
- Includes a hose hanger breakaway clip, zip ties, and sealing washers
- Dorman 622-077 brake hose for Jeep Wrangler rear left service
Detailed Description
This Dorman brake hydraulic hose is built for 2003-2006 Jeep Wrangler rear left applications where a suspension lift requires extra hose length. The 355 mm overall length and braided PTFE-style stainless construction help maintain brake line routing while adding resistance to abrasion and trail contact. Dorman 622-077 is a direct-fit style replacement for the specified Jeep Wrangler configuration and is designed around the original mounting and connection points.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake hose tension after a lift kit installation
- Restricted rear suspension travel caused by a short OE hose
- Exposure to rocks, brush, and trail debris
- Brake line damage from snagging during articulation
- Loss of brake fluid pressure from a compromised hose
Installation Notes and Tips
Verify rear left routing before installation and confirm the hose follows the suspension travel path without stretching at full droop. Use the supplied hanger clip and zip ties to secure the line away from moving components and sharp edges. Check all banjo and threaded connections for proper sealing after installation and bleed the brake system as required.
Quality Assurance
This brake hose is DOT approved and built with steel fittings and braided stainless steel protection for demanding Jeep Wrangler service. It is engineered for the listed 2003-2006 Jeep Wrangler rear left application and follows the specified OE-style connection points.
Dorman 622-077 Brake Hydraulic Hose - Rear Left
Dorman 622-077 Rear Left Brake Hose for Jeep Wrangler
Dorman 622-077 is a braided stainless steel brake hydraulic hose for lifted Jeep Wrangler applications. It is 4 inches longer than the original equipment hose and is built for the rear left position on 2003-2006 Jeep Wrangler models with raised suspension systems.
For Jeep Wrangler owners who need a longer rear brake line after a suspension lift, this hose provides the added length and protection needed for off-road use. The stainless braided construction helps shield the hose from trail debris, while the included breakaway hanger clip is engineered to release if the hose snags an obstacle.
Key Features
- Fits 2003-2006 Jeep Wrangler, rear left
- 4 inches longer than the original equipment hose for lifted suspension setups
- Braided stainless steel exterior for added protection from off-road hazards
- DOT approved brake hydraulic hose
- Steel female end 1 with inverted flare and 3/8-24 in. thread size
- Steel banjo end 2 with open flare and 9.6 mm inside diameter
- Includes a hose hanger breakaway clip, zip ties, and sealing washers
- Dorman 622-077 brake hose for Jeep Wrangler rear left service
Detailed Description
This Dorman brake hydraulic hose is built for 2003-2006 Jeep Wrangler rear left applications where a suspension lift requires extra hose length. The 355 mm overall length and braided PTFE-style stainless construction help maintain brake line routing while adding resistance to abrasion and trail contact. Dorman 622-077 is a direct-fit style replacement for the specified Jeep Wrangler configuration and is designed around the original mounting and connection points.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake hose tension after a lift kit installation
- Restricted rear suspension travel caused by a short OE hose
- Exposure to rocks, brush, and trail debris
- Brake line damage from snagging during articulation
- Loss of brake fluid pressure from a compromised hose
Installation Notes and Tips
Verify rear left routing before installation and confirm the hose follows the suspension travel path without stretching at full droop. Use the supplied hanger clip and zip ties to secure the line away from moving components and sharp edges. Check all banjo and threaded connections for proper sealing after installation and bleed the brake system as required.
Quality Assurance
This brake hose is DOT approved and built with steel fittings and braided stainless steel protection for demanding Jeep Wrangler service. It is engineered for the listed 2003-2006 Jeep Wrangler rear left application and follows the specified OE-style connection points.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 622-077 Rear Left Brake Hose for Jeep Wrangler
Dorman 622-077 is a braided stainless steel brake hydraulic hose for lifted Jeep Wrangler applications. It is 4 inches longer than the original equipment hose and is built for the rear left position on 2003-2006 Jeep Wrangler models with raised suspension systems.
For Jeep Wrangler owners who need a longer rear brake line after a suspension lift, this hose provides the added length and protection needed for off-road use. The stainless braided construction helps shield the hose from trail debris, while the included breakaway hanger clip is engineered to release if the hose snags an obstacle.
Key Features
- Fits 2003-2006 Jeep Wrangler, rear left
- 4 inches longer than the original equipment hose for lifted suspension setups
- Braided stainless steel exterior for added protection from off-road hazards
- DOT approved brake hydraulic hose
- Steel female end 1 with inverted flare and 3/8-24 in. thread size
- Steel banjo end 2 with open flare and 9.6 mm inside diameter
- Includes a hose hanger breakaway clip, zip ties, and sealing washers
- Dorman 622-077 brake hose for Jeep Wrangler rear left service
Detailed Description
This Dorman brake hydraulic hose is built for 2003-2006 Jeep Wrangler rear left applications where a suspension lift requires extra hose length. The 355 mm overall length and braided PTFE-style stainless construction help maintain brake line routing while adding resistance to abrasion and trail contact. Dorman 622-077 is a direct-fit style replacement for the specified Jeep Wrangler configuration and is designed around the original mounting and connection points.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake hose tension after a lift kit installation
- Restricted rear suspension travel caused by a short OE hose
- Exposure to rocks, brush, and trail debris
- Brake line damage from snagging during articulation
- Loss of brake fluid pressure from a compromised hose
Installation Notes and Tips
Verify rear left routing before installation and confirm the hose follows the suspension travel path without stretching at full droop. Use the supplied hanger clip and zip ties to secure the line away from moving components and sharp edges. Check all banjo and threaded connections for proper sealing after installation and bleed the brake system as required.
Quality Assurance
This brake hose is DOT approved and built with steel fittings and braided stainless steel protection for demanding Jeep Wrangler service. It is engineered for the listed 2003-2006 Jeep Wrangler rear left application and follows the specified OE-style connection points.
