Dorman 630-033 Drive Axle Shaft - Rear
Dorman 630-033 Rear Axle Shaft
Dorman 630-033 is a direct replacement drive axle shaft for select rear applications on 1967-1969 Chevrolet C10 Suburban and Chevrolet K10 Suburban models with the 8.87 in. rear axle. It is built for full floating axle service and uses carbon steel construction with a galvanized finish for dependable fit and corrosion resistance in normal service conditions.
Key Features
- Direct replacement axle shaft for the original equipment design
- Fits 1967-1969 Chevrolet C10 Suburban, rear, 8.87 in. rear axle
- Fits 1967-1969 Chevrolet K10 Suburban, rear, 8.87 in. rear axle
- Carbon steel shaft with galvanized finish
- Full floating axle type with semi-floating differential case design listed in the application data
- 30 inboard splines, 6 mounting holes, 140 mm wheel bolt pattern
- Length: 30.59 in. / 777 mm; shaft diameter: 41.1 mm; diameter: 176.9 mm
- No bearing, axle nut, retainer, seal, ABS tone ring, or brake hardware included
Detailed Description
This Dorman drive axle shaft, part number 630-033, is made for rear axle service on classic Chevrolet Suburban 4x4 applications. It replaces the original axle shaft on the specified C10 Suburban and K10 Suburban vehicles and is sized to match the listed axle dimensions, spline count, and mounting pattern. The galvanized carbon steel construction supports long-term durability in driveline use, while the application-specific design helps maintain proper axle fitment in the rear axle assembly.
This part cross-references OE-style axle shaft applications for the same vehicle fitment. Use Dorman 630-033 when servicing a damaged axle shaft or when wear in the axle assembly requires replacement on these Chevrolet trucks.
What It Helps Fix
- Broken or bent rear axle shaft
- Axle shaft wear from mileage or load use
- Noise or vibration traced to axle shaft damage
- Loss of driveline function caused by shaft failure
- Service issues during rear axle rebuilds on classic Chevrolet Suburban models
Installation Notes
Verify rear axle identification, spline count, bolt pattern, and shaft dimensions before installation. This axle shaft is listed for 8.87 in. rear axle applications only, so confirm the axle housing and related components match the vehicle fitment. Inspect bearings, seals, and related axle hardware during service, since those items are not included with this part.
Quality Assurance
Dorman manufactures direct replacement drivetrain components for vehicle-specific repair applications. Part number 630-033 follows the listed OE-style dimensions and fitment data for the confirmed Chevrolet C10 Suburban and K10 Suburban rear axle applications.
Original: $362.45
-65%$362.45
$126.86Dorman 630-033 Drive Axle Shaft - Rear
Dorman 630-033 Rear Axle Shaft
Dorman 630-033 is a direct replacement drive axle shaft for select rear applications on 1967-1969 Chevrolet C10 Suburban and Chevrolet K10 Suburban models with the 8.87 in. rear axle. It is built for full floating axle service and uses carbon steel construction with a galvanized finish for dependable fit and corrosion resistance in normal service conditions.
Key Features
- Direct replacement axle shaft for the original equipment design
- Fits 1967-1969 Chevrolet C10 Suburban, rear, 8.87 in. rear axle
- Fits 1967-1969 Chevrolet K10 Suburban, rear, 8.87 in. rear axle
- Carbon steel shaft with galvanized finish
- Full floating axle type with semi-floating differential case design listed in the application data
- 30 inboard splines, 6 mounting holes, 140 mm wheel bolt pattern
- Length: 30.59 in. / 777 mm; shaft diameter: 41.1 mm; diameter: 176.9 mm
- No bearing, axle nut, retainer, seal, ABS tone ring, or brake hardware included
Detailed Description
This Dorman drive axle shaft, part number 630-033, is made for rear axle service on classic Chevrolet Suburban 4x4 applications. It replaces the original axle shaft on the specified C10 Suburban and K10 Suburban vehicles and is sized to match the listed axle dimensions, spline count, and mounting pattern. The galvanized carbon steel construction supports long-term durability in driveline use, while the application-specific design helps maintain proper axle fitment in the rear axle assembly.
This part cross-references OE-style axle shaft applications for the same vehicle fitment. Use Dorman 630-033 when servicing a damaged axle shaft or when wear in the axle assembly requires replacement on these Chevrolet trucks.
What It Helps Fix
- Broken or bent rear axle shaft
- Axle shaft wear from mileage or load use
- Noise or vibration traced to axle shaft damage
- Loss of driveline function caused by shaft failure
- Service issues during rear axle rebuilds on classic Chevrolet Suburban models
Installation Notes
Verify rear axle identification, spline count, bolt pattern, and shaft dimensions before installation. This axle shaft is listed for 8.87 in. rear axle applications only, so confirm the axle housing and related components match the vehicle fitment. Inspect bearings, seals, and related axle hardware during service, since those items are not included with this part.
Quality Assurance
Dorman manufactures direct replacement drivetrain components for vehicle-specific repair applications. Part number 630-033 follows the listed OE-style dimensions and fitment data for the confirmed Chevrolet C10 Suburban and K10 Suburban rear axle applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 630-033 Rear Axle Shaft
Dorman 630-033 is a direct replacement drive axle shaft for select rear applications on 1967-1969 Chevrolet C10 Suburban and Chevrolet K10 Suburban models with the 8.87 in. rear axle. It is built for full floating axle service and uses carbon steel construction with a galvanized finish for dependable fit and corrosion resistance in normal service conditions.
Key Features
- Direct replacement axle shaft for the original equipment design
- Fits 1967-1969 Chevrolet C10 Suburban, rear, 8.87 in. rear axle
- Fits 1967-1969 Chevrolet K10 Suburban, rear, 8.87 in. rear axle
- Carbon steel shaft with galvanized finish
- Full floating axle type with semi-floating differential case design listed in the application data
- 30 inboard splines, 6 mounting holes, 140 mm wheel bolt pattern
- Length: 30.59 in. / 777 mm; shaft diameter: 41.1 mm; diameter: 176.9 mm
- No bearing, axle nut, retainer, seal, ABS tone ring, or brake hardware included
Detailed Description
This Dorman drive axle shaft, part number 630-033, is made for rear axle service on classic Chevrolet Suburban 4x4 applications. It replaces the original axle shaft on the specified C10 Suburban and K10 Suburban vehicles and is sized to match the listed axle dimensions, spline count, and mounting pattern. The galvanized carbon steel construction supports long-term durability in driveline use, while the application-specific design helps maintain proper axle fitment in the rear axle assembly.
This part cross-references OE-style axle shaft applications for the same vehicle fitment. Use Dorman 630-033 when servicing a damaged axle shaft or when wear in the axle assembly requires replacement on these Chevrolet trucks.
What It Helps Fix
- Broken or bent rear axle shaft
- Axle shaft wear from mileage or load use
- Noise or vibration traced to axle shaft damage
- Loss of driveline function caused by shaft failure
- Service issues during rear axle rebuilds on classic Chevrolet Suburban models
Installation Notes
Verify rear axle identification, spline count, bolt pattern, and shaft dimensions before installation. This axle shaft is listed for 8.87 in. rear axle applications only, so confirm the axle housing and related components match the vehicle fitment. Inspect bearings, seals, and related axle hardware during service, since those items are not included with this part.
Quality Assurance
Dorman manufactures direct replacement drivetrain components for vehicle-specific repair applications. Part number 630-033 follows the listed OE-style dimensions and fitment data for the confirmed Chevrolet C10 Suburban and K10 Suburban rear axle applications.
