Dorman 630-035 Drive Axle Shaft - Rear Left
Dorman 630-035 Rear Left Axle Shaft
Dorman 630-035 is a direct replacement drive axle shaft for select rear left applications on the 2004-2009 Dodge Durango with Sales Code DRB (Corporate 9.25 Light Duty Rear Axle). It is built to replace a damaged axle shaft or one with worn bearings, using application-specific installation components for the listed vehicle fitment.
Key Features
- Direct replacement axle shaft for the rear left position
- Fits 2004-2009 Dodge Durango, rear left, with Sales Code DRB (Corporate 9.25 Light Duty Rear Axle)
- Carbon steel shaft construction with galvanized finish
- Inboard spline count: 31
- Shaft length: 39.4 in. / 89.5 mm listed in product data
- Wheel bolt pattern size: 140 mm
- Mounting hole quantity: 5
- Cross-references Mopar 52111197AB and 52111198AB for the same application
Product Details
This Dorman drive axle shaft is engineered for rear axle service where the original shaft has been damaged or the bearings have worn out. The part number 630-035 is listed for the rear left side on Dodge Durango models from 2004 through 2009 equipped with the Corporate 9.25 Light Duty Rear Axle. With a carbon steel shaft and galvanized finish, it is built to match the original equipment layout for the specified application.
For buyers searching for a rear left axle shaft for Dodge Durango 2004-2009, Dorman 630-035 provides a direct OE-style replacement path. The design includes the listed spline and mounting specifications needed for the confirmed fitment, helping restore driveline function on the affected vehicle.
Common Repair Reasons
- Broken or bent rear axle shaft
- Excessive noise from worn axle bearings
- Vibration or driveline imbalance from shaft damage
- Axle-related leakage or wear at the rear axle assembly
- Loss of proper rear wheel drive operation on the affected side
Installation Notes
Verify axle code DRB and rear left position before installation. Confirm spline count, shaft length, and wheel bolt pattern against the removed part to ensure correct application. Inspect related bearings, seals, and axle housing components during service, since this listing does not include a bearing, seal, axle nut, or axle shaft seal.
For 2004-2009 Dodge Durango rear axle repair, Dorman 630-035 should be matched to the exact vehicle configuration shown in the fitment data. Use proper axle service procedures and torque specifications during installation.
Quality Assurance
Dorman supplies direct replacement driveline components built to match original equipment fitment for specific vehicles. Part number 630-035 is cataloged for the confirmed Dodge Durango application and cross-references Mopar OE numbers for the same use case.
Original: $207.68
-65%$207.68
$72.69Dorman 630-035 Drive Axle Shaft - Rear Left
Dorman 630-035 Rear Left Axle Shaft
Dorman 630-035 is a direct replacement drive axle shaft for select rear left applications on the 2004-2009 Dodge Durango with Sales Code DRB (Corporate 9.25 Light Duty Rear Axle). It is built to replace a damaged axle shaft or one with worn bearings, using application-specific installation components for the listed vehicle fitment.
Key Features
- Direct replacement axle shaft for the rear left position
- Fits 2004-2009 Dodge Durango, rear left, with Sales Code DRB (Corporate 9.25 Light Duty Rear Axle)
- Carbon steel shaft construction with galvanized finish
- Inboard spline count: 31
- Shaft length: 39.4 in. / 89.5 mm listed in product data
- Wheel bolt pattern size: 140 mm
- Mounting hole quantity: 5
- Cross-references Mopar 52111197AB and 52111198AB for the same application
Product Details
This Dorman drive axle shaft is engineered for rear axle service where the original shaft has been damaged or the bearings have worn out. The part number 630-035 is listed for the rear left side on Dodge Durango models from 2004 through 2009 equipped with the Corporate 9.25 Light Duty Rear Axle. With a carbon steel shaft and galvanized finish, it is built to match the original equipment layout for the specified application.
For buyers searching for a rear left axle shaft for Dodge Durango 2004-2009, Dorman 630-035 provides a direct OE-style replacement path. The design includes the listed spline and mounting specifications needed for the confirmed fitment, helping restore driveline function on the affected vehicle.
Common Repair Reasons
- Broken or bent rear axle shaft
- Excessive noise from worn axle bearings
- Vibration or driveline imbalance from shaft damage
- Axle-related leakage or wear at the rear axle assembly
- Loss of proper rear wheel drive operation on the affected side
Installation Notes
Verify axle code DRB and rear left position before installation. Confirm spline count, shaft length, and wheel bolt pattern against the removed part to ensure correct application. Inspect related bearings, seals, and axle housing components during service, since this listing does not include a bearing, seal, axle nut, or axle shaft seal.
For 2004-2009 Dodge Durango rear axle repair, Dorman 630-035 should be matched to the exact vehicle configuration shown in the fitment data. Use proper axle service procedures and torque specifications during installation.
Quality Assurance
Dorman supplies direct replacement driveline components built to match original equipment fitment for specific vehicles. Part number 630-035 is cataloged for the confirmed Dodge Durango application and cross-references Mopar OE numbers for the same use case.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 630-035 Rear Left Axle Shaft
Dorman 630-035 is a direct replacement drive axle shaft for select rear left applications on the 2004-2009 Dodge Durango with Sales Code DRB (Corporate 9.25 Light Duty Rear Axle). It is built to replace a damaged axle shaft or one with worn bearings, using application-specific installation components for the listed vehicle fitment.
Key Features
- Direct replacement axle shaft for the rear left position
- Fits 2004-2009 Dodge Durango, rear left, with Sales Code DRB (Corporate 9.25 Light Duty Rear Axle)
- Carbon steel shaft construction with galvanized finish
- Inboard spline count: 31
- Shaft length: 39.4 in. / 89.5 mm listed in product data
- Wheel bolt pattern size: 140 mm
- Mounting hole quantity: 5
- Cross-references Mopar 52111197AB and 52111198AB for the same application
Product Details
This Dorman drive axle shaft is engineered for rear axle service where the original shaft has been damaged or the bearings have worn out. The part number 630-035 is listed for the rear left side on Dodge Durango models from 2004 through 2009 equipped with the Corporate 9.25 Light Duty Rear Axle. With a carbon steel shaft and galvanized finish, it is built to match the original equipment layout for the specified application.
For buyers searching for a rear left axle shaft for Dodge Durango 2004-2009, Dorman 630-035 provides a direct OE-style replacement path. The design includes the listed spline and mounting specifications needed for the confirmed fitment, helping restore driveline function on the affected vehicle.
Common Repair Reasons
- Broken or bent rear axle shaft
- Excessive noise from worn axle bearings
- Vibration or driveline imbalance from shaft damage
- Axle-related leakage or wear at the rear axle assembly
- Loss of proper rear wheel drive operation on the affected side
Installation Notes
Verify axle code DRB and rear left position before installation. Confirm spline count, shaft length, and wheel bolt pattern against the removed part to ensure correct application. Inspect related bearings, seals, and axle housing components during service, since this listing does not include a bearing, seal, axle nut, or axle shaft seal.
For 2004-2009 Dodge Durango rear axle repair, Dorman 630-035 should be matched to the exact vehicle configuration shown in the fitment data. Use proper axle service procedures and torque specifications during installation.
Quality Assurance
Dorman supplies direct replacement driveline components built to match original equipment fitment for specific vehicles. Part number 630-035 is cataloged for the confirmed Dodge Durango application and cross-references Mopar OE numbers for the same use case.
