Dorman 630-632 Drive Axle Shaft - Front
Dorman 630-632 Front Drive Axle Shaft
Dorman 630-632 is a direct replacement drive axle shaft for select Ford Expedition, Ford F-150, Lincoln Navigator, and Lincoln Mark LT front applications. It replaces a damaged axle shaft or a unit with worn bearings, using application-specific installation components for the listed vehicles.
Key Features
- Direct replacement for the original equipment axle shaft on select front applications
- Fits full floating axle setups with circular differential case design
- Carbon steel shaft with galvanized finish
- 31 spline count on both inboard and outboard ends
- Shaft length: 580.8 mm; diameter: 31.9 mm
- No ABS tone ring, axle nut, bearing, retainer, or axle shaft seal included
- No wheel studs, wheel nuts, brake hardware, or universal joints included
Detailed Description
This Dorman drive axle shaft is built for front-end service on 2007-2020 Ford Expedition, 2009-2020 Ford F-150, 2007-2020 Lincoln Navigator, and 2010-2014 Lincoln Mark LT models with the original design. The Dorman 630-632 follows OE-style dimensions and spline configuration to match the factory axle layout, making it a practical replacement when the original shaft is damaged or the bearings are worn. This part cross-references Ford OE number 7L1Z3219B for the same application.
What It Helps Fix
- Broken or bent front axle shaft
- Noise or vibration related to worn axle support components
- Loss of driveline function at the front axle
- Service needs after axle shaft wear or damage
- Replacement of an OE-style shaft on Ford Expedition, Ford F-150, Lincoln Navigator, or Lincoln Mark LT front driveline systems
Installation Notes and Tips
Verify axle type, spline count, shaft length, and front position before installation. This part is listed for full floating front applications with original design fitment, so confirm the vehicle’s factory configuration against the OE reference and the existing shaft dimensions. The Dorman 630-632 does not include bearings, seals, axle nut, or ABS tone ring, so those components should be inspected and replaced separately if needed.
Quality Assurance
Dorman manufactures this axle shaft as an OE-style replacement part for the listed applications, with galvanized carbon steel construction for service use. Fitment is confirmed for 2007-2020 Ford Expedition, 2009-2020 Ford F-150, 2007-2020 Lincoln Navigator, and 2010-2014 Lincoln Mark LT front driveline applications.
Dorman 630-632 Drive Axle Shaft - Front
Dorman 630-632 Front Drive Axle Shaft
Dorman 630-632 is a direct replacement drive axle shaft for select Ford Expedition, Ford F-150, Lincoln Navigator, and Lincoln Mark LT front applications. It replaces a damaged axle shaft or a unit with worn bearings, using application-specific installation components for the listed vehicles.
Key Features
- Direct replacement for the original equipment axle shaft on select front applications
- Fits full floating axle setups with circular differential case design
- Carbon steel shaft with galvanized finish
- 31 spline count on both inboard and outboard ends
- Shaft length: 580.8 mm; diameter: 31.9 mm
- No ABS tone ring, axle nut, bearing, retainer, or axle shaft seal included
- No wheel studs, wheel nuts, brake hardware, or universal joints included
Detailed Description
This Dorman drive axle shaft is built for front-end service on 2007-2020 Ford Expedition, 2009-2020 Ford F-150, 2007-2020 Lincoln Navigator, and 2010-2014 Lincoln Mark LT models with the original design. The Dorman 630-632 follows OE-style dimensions and spline configuration to match the factory axle layout, making it a practical replacement when the original shaft is damaged or the bearings are worn. This part cross-references Ford OE number 7L1Z3219B for the same application.
What It Helps Fix
- Broken or bent front axle shaft
- Noise or vibration related to worn axle support components
- Loss of driveline function at the front axle
- Service needs after axle shaft wear or damage
- Replacement of an OE-style shaft on Ford Expedition, Ford F-150, Lincoln Navigator, or Lincoln Mark LT front driveline systems
Installation Notes and Tips
Verify axle type, spline count, shaft length, and front position before installation. This part is listed for full floating front applications with original design fitment, so confirm the vehicle’s factory configuration against the OE reference and the existing shaft dimensions. The Dorman 630-632 does not include bearings, seals, axle nut, or ABS tone ring, so those components should be inspected and replaced separately if needed.
Quality Assurance
Dorman manufactures this axle shaft as an OE-style replacement part for the listed applications, with galvanized carbon steel construction for service use. Fitment is confirmed for 2007-2020 Ford Expedition, 2009-2020 Ford F-150, 2007-2020 Lincoln Navigator, and 2010-2014 Lincoln Mark LT front driveline applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 630-632 Front Drive Axle Shaft
Dorman 630-632 is a direct replacement drive axle shaft for select Ford Expedition, Ford F-150, Lincoln Navigator, and Lincoln Mark LT front applications. It replaces a damaged axle shaft or a unit with worn bearings, using application-specific installation components for the listed vehicles.
Key Features
- Direct replacement for the original equipment axle shaft on select front applications
- Fits full floating axle setups with circular differential case design
- Carbon steel shaft with galvanized finish
- 31 spline count on both inboard and outboard ends
- Shaft length: 580.8 mm; diameter: 31.9 mm
- No ABS tone ring, axle nut, bearing, retainer, or axle shaft seal included
- No wheel studs, wheel nuts, brake hardware, or universal joints included
Detailed Description
This Dorman drive axle shaft is built for front-end service on 2007-2020 Ford Expedition, 2009-2020 Ford F-150, 2007-2020 Lincoln Navigator, and 2010-2014 Lincoln Mark LT models with the original design. The Dorman 630-632 follows OE-style dimensions and spline configuration to match the factory axle layout, making it a practical replacement when the original shaft is damaged or the bearings are worn. This part cross-references Ford OE number 7L1Z3219B for the same application.
What It Helps Fix
- Broken or bent front axle shaft
- Noise or vibration related to worn axle support components
- Loss of driveline function at the front axle
- Service needs after axle shaft wear or damage
- Replacement of an OE-style shaft on Ford Expedition, Ford F-150, Lincoln Navigator, or Lincoln Mark LT front driveline systems
Installation Notes and Tips
Verify axle type, spline count, shaft length, and front position before installation. This part is listed for full floating front applications with original design fitment, so confirm the vehicle’s factory configuration against the OE reference and the existing shaft dimensions. The Dorman 630-632 does not include bearings, seals, axle nut, or ABS tone ring, so those components should be inspected and replaced separately if needed.
Quality Assurance
Dorman manufactures this axle shaft as an OE-style replacement part for the listed applications, with galvanized carbon steel construction for service use. Fitment is confirmed for 2007-2020 Ford Expedition, 2009-2020 Ford F-150, 2007-2020 Lincoln Navigator, and 2010-2014 Lincoln Mark LT front driveline applications.
