Dorman 686-425 Steering Knuckle Kit - Front Left
Dorman 686-425 Loaded Knuckle for Honda CR-V
Dorman 686-425 is a loaded steering knuckle kit for the front left side of select Honda CR-V models. It combines the critical wheel-end components into one assembled unit to reduce the need for press work and separate part sourcing during repair.
- Fits 2017-2022 Honda CR-V, front left
- OE FIX loaded knuckle design for a simpler wheel bearing service
- Steel construction for steering and suspension durability
- Includes a preassembled wheel bearing and hub assembly
- 5-lug configuration with 114.3 mm bolt circle diameter
- ABS sensor type: sensor-ready application
- 30-spline driven hub design
- Wheel stud thread pitch: 1.5 mm
Detailed Product Overview
This Dorman steering knuckle kit, part number 686-425, is built for 2017-2022 Honda CR-V front left applications. It is engineered as a loaded knuckle assembly with the bearing and hub already integrated, helping streamline replacement of worn wheel-end components on the Honda CR-V. The steel knuckle includes a circular flange design, 5 flange bolt holes, and a 5-stud wheel pattern with a 114.3 mm bolt circle diameter. For fitment verification, 686-425 is the correct part number to reference when matching the front left steering knuckle assembly on the listed Honda CR-V model years.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Applications
- Worn or noisy wheel bearing service on the front left corner
- Hub or bearing replacement without separate press-in procedures
- Steering knuckle damage from impact or corrosion
- ABS-related wheel-end service where the knuckle assembly is being replaced
- Front-end vibration or looseness traced to hub and bearing wear
Installation Notes and Tips
Confirm the vehicle is a 2017-2022 Honda CR-V with front left fitment before ordering. Inspect related steering and suspension components, axle interface, and brake hardware condition during removal. Because this is a loaded knuckle assembly, verify all mounting points, spline count, flange dimensions, and sensor-related details against the original part before installation. Part number 686-425 should be matched to the vehicle by position and configuration, not by appearance alone.
Quality Assurance
Dorman OE FIX parts are built to simplify repairs by combining key service components into a single assembly. This loaded knuckle follows that approach for the Honda CR-V front left application, helping reduce the complexity associated with traditional wheel bearing replacement methods.
Dorman 686-425 Steering Knuckle Kit - Front Left
Dorman 686-425 Loaded Knuckle for Honda CR-V
Dorman 686-425 is a loaded steering knuckle kit for the front left side of select Honda CR-V models. It combines the critical wheel-end components into one assembled unit to reduce the need for press work and separate part sourcing during repair.
- Fits 2017-2022 Honda CR-V, front left
- OE FIX loaded knuckle design for a simpler wheel bearing service
- Steel construction for steering and suspension durability
- Includes a preassembled wheel bearing and hub assembly
- 5-lug configuration with 114.3 mm bolt circle diameter
- ABS sensor type: sensor-ready application
- 30-spline driven hub design
- Wheel stud thread pitch: 1.5 mm
Detailed Product Overview
This Dorman steering knuckle kit, part number 686-425, is built for 2017-2022 Honda CR-V front left applications. It is engineered as a loaded knuckle assembly with the bearing and hub already integrated, helping streamline replacement of worn wheel-end components on the Honda CR-V. The steel knuckle includes a circular flange design, 5 flange bolt holes, and a 5-stud wheel pattern with a 114.3 mm bolt circle diameter. For fitment verification, 686-425 is the correct part number to reference when matching the front left steering knuckle assembly on the listed Honda CR-V model years.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Applications
- Worn or noisy wheel bearing service on the front left corner
- Hub or bearing replacement without separate press-in procedures
- Steering knuckle damage from impact or corrosion
- ABS-related wheel-end service where the knuckle assembly is being replaced
- Front-end vibration or looseness traced to hub and bearing wear
Installation Notes and Tips
Confirm the vehicle is a 2017-2022 Honda CR-V with front left fitment before ordering. Inspect related steering and suspension components, axle interface, and brake hardware condition during removal. Because this is a loaded knuckle assembly, verify all mounting points, spline count, flange dimensions, and sensor-related details against the original part before installation. Part number 686-425 should be matched to the vehicle by position and configuration, not by appearance alone.
Quality Assurance
Dorman OE FIX parts are built to simplify repairs by combining key service components into a single assembly. This loaded knuckle follows that approach for the Honda CR-V front left application, helping reduce the complexity associated with traditional wheel bearing replacement methods.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 686-425 Loaded Knuckle for Honda CR-V
Dorman 686-425 is a loaded steering knuckle kit for the front left side of select Honda CR-V models. It combines the critical wheel-end components into one assembled unit to reduce the need for press work and separate part sourcing during repair.
- Fits 2017-2022 Honda CR-V, front left
- OE FIX loaded knuckle design for a simpler wheel bearing service
- Steel construction for steering and suspension durability
- Includes a preassembled wheel bearing and hub assembly
- 5-lug configuration with 114.3 mm bolt circle diameter
- ABS sensor type: sensor-ready application
- 30-spline driven hub design
- Wheel stud thread pitch: 1.5 mm
Detailed Product Overview
This Dorman steering knuckle kit, part number 686-425, is built for 2017-2022 Honda CR-V front left applications. It is engineered as a loaded knuckle assembly with the bearing and hub already integrated, helping streamline replacement of worn wheel-end components on the Honda CR-V. The steel knuckle includes a circular flange design, 5 flange bolt holes, and a 5-stud wheel pattern with a 114.3 mm bolt circle diameter. For fitment verification, 686-425 is the correct part number to reference when matching the front left steering knuckle assembly on the listed Honda CR-V model years.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Repair Applications
- Worn or noisy wheel bearing service on the front left corner
- Hub or bearing replacement without separate press-in procedures
- Steering knuckle damage from impact or corrosion
- ABS-related wheel-end service where the knuckle assembly is being replaced
- Front-end vibration or looseness traced to hub and bearing wear
Installation Notes and Tips
Confirm the vehicle is a 2017-2022 Honda CR-V with front left fitment before ordering. Inspect related steering and suspension components, axle interface, and brake hardware condition during removal. Because this is a loaded knuckle assembly, verify all mounting points, spline count, flange dimensions, and sensor-related details against the original part before installation. Part number 686-425 should be matched to the vehicle by position and configuration, not by appearance alone.
Quality Assurance
Dorman OE FIX parts are built to simplify repairs by combining key service components into a single assembly. This loaded knuckle follows that approach for the Honda CR-V front left application, helping reduce the complexity associated with traditional wheel bearing replacement methods.
