Dorman 698-258 Suspension Knuckle - Rear Right
Rear Right Suspension Knuckle for BMW
Dorman 698-258 is a steel rear suspension knuckle engineered as a standard replacement for the original part on select BMW applications. It is built for the rear right position and is designed to match the fit and function needed for BMW 328i, 335i, 135i, and related models.
For BMW 328i rear right suspension repair, BMW 335i rear right knuckle replacement, or a BMW 135i rear right suspension knuckle, this part provides a direct-fit service solution. Part number 698-258 is also a practical choice when replacing a worn or damaged rear knuckle on compatible BMW rear suspension assemblies.
Key Features
- Steel construction for strength in rear suspension service
- Black finish
- Standard replacement grade
- Gen 1 bearing generation
- 5 mounting holes with 0.23 in mounting hole diameter
- Inside diameter: 3.04 in
- Dimensions: 13 in length, 8.4 in width
- Rear right position application
- Hub, bearing, ball joint, and mounting hardware not included
Detailed Description
Dorman 698-258 suspension knuckle is precision-engineered and tested to replace the original rear knuckle on specific BMW vehicles. It is made from steel and configured for the rear right side, with a Gen 1 bearing design and the mounting points needed for proper suspension and wheel-end alignment. This part cross-references BMW OE number 33326774808 for the same application.
Compatible With 2007-2016 BMW 328i, rear right; 2007-2015 BMW 335i, rear right; 2008-2013 BMW 135i, rear right; 2013 BMW 135is, rear right; 2011-2013 BMW 325i, rear right; 2009-2013 BMW 328i xDrive, rear right; 2009-2013 BMW 335i xDrive, rear right; 2011-2013 BMW 335is, rear right; 2007-2008 BMW 328xi, rear right; 2007-2008 BMW 335xi, rear right; 2001-2007 BMW 330i, rear right; 2001-2006 BMW 325xi, rear right; and 2001-2006 BMW 330xi, rear right.
What It Helps Fix
- Rear suspension noise from a damaged knuckle or bearing area
- Uneven wheel alignment caused by worn suspension mounting points
- Handling issues related to a bent or cracked rear knuckle
- Wheel-end instability after impact or corrosion damage
- Failed rear suspension service on BMW 328i, 335i, or 135i models
Installation Notes and Tips
Confirm rear right fitment before installation and compare the original knuckle to the replacement for mounting-hole layout, bearing generation, and dimensions. Transfer or source the required hub, bearing, ball joint, and hardware separately as needed. After installation, perform a professional alignment to verify rear suspension geometry.
Quality Assurance
Dorman designs this suspension knuckle as a reliable replacement for the original component and subjects it to testing for fit and function on the listed BMW applications. Part number 698-258 is built to meet standard replacement expectations for rear suspension service.
Original: $292.62
-65%$292.62
$102.42Dorman 698-258 Suspension Knuckle - Rear Right
Rear Right Suspension Knuckle for BMW
Dorman 698-258 is a steel rear suspension knuckle engineered as a standard replacement for the original part on select BMW applications. It is built for the rear right position and is designed to match the fit and function needed for BMW 328i, 335i, 135i, and related models.
For BMW 328i rear right suspension repair, BMW 335i rear right knuckle replacement, or a BMW 135i rear right suspension knuckle, this part provides a direct-fit service solution. Part number 698-258 is also a practical choice when replacing a worn or damaged rear knuckle on compatible BMW rear suspension assemblies.
Key Features
- Steel construction for strength in rear suspension service
- Black finish
- Standard replacement grade
- Gen 1 bearing generation
- 5 mounting holes with 0.23 in mounting hole diameter
- Inside diameter: 3.04 in
- Dimensions: 13 in length, 8.4 in width
- Rear right position application
- Hub, bearing, ball joint, and mounting hardware not included
Detailed Description
Dorman 698-258 suspension knuckle is precision-engineered and tested to replace the original rear knuckle on specific BMW vehicles. It is made from steel and configured for the rear right side, with a Gen 1 bearing design and the mounting points needed for proper suspension and wheel-end alignment. This part cross-references BMW OE number 33326774808 for the same application.
Compatible With 2007-2016 BMW 328i, rear right; 2007-2015 BMW 335i, rear right; 2008-2013 BMW 135i, rear right; 2013 BMW 135is, rear right; 2011-2013 BMW 325i, rear right; 2009-2013 BMW 328i xDrive, rear right; 2009-2013 BMW 335i xDrive, rear right; 2011-2013 BMW 335is, rear right; 2007-2008 BMW 328xi, rear right; 2007-2008 BMW 335xi, rear right; 2001-2007 BMW 330i, rear right; 2001-2006 BMW 325xi, rear right; and 2001-2006 BMW 330xi, rear right.
What It Helps Fix
- Rear suspension noise from a damaged knuckle or bearing area
- Uneven wheel alignment caused by worn suspension mounting points
- Handling issues related to a bent or cracked rear knuckle
- Wheel-end instability after impact or corrosion damage
- Failed rear suspension service on BMW 328i, 335i, or 135i models
Installation Notes and Tips
Confirm rear right fitment before installation and compare the original knuckle to the replacement for mounting-hole layout, bearing generation, and dimensions. Transfer or source the required hub, bearing, ball joint, and hardware separately as needed. After installation, perform a professional alignment to verify rear suspension geometry.
Quality Assurance
Dorman designs this suspension knuckle as a reliable replacement for the original component and subjects it to testing for fit and function on the listed BMW applications. Part number 698-258 is built to meet standard replacement expectations for rear suspension service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rear Right Suspension Knuckle for BMW
Dorman 698-258 is a steel rear suspension knuckle engineered as a standard replacement for the original part on select BMW applications. It is built for the rear right position and is designed to match the fit and function needed for BMW 328i, 335i, 135i, and related models.
For BMW 328i rear right suspension repair, BMW 335i rear right knuckle replacement, or a BMW 135i rear right suspension knuckle, this part provides a direct-fit service solution. Part number 698-258 is also a practical choice when replacing a worn or damaged rear knuckle on compatible BMW rear suspension assemblies.
Key Features
- Steel construction for strength in rear suspension service
- Black finish
- Standard replacement grade
- Gen 1 bearing generation
- 5 mounting holes with 0.23 in mounting hole diameter
- Inside diameter: 3.04 in
- Dimensions: 13 in length, 8.4 in width
- Rear right position application
- Hub, bearing, ball joint, and mounting hardware not included
Detailed Description
Dorman 698-258 suspension knuckle is precision-engineered and tested to replace the original rear knuckle on specific BMW vehicles. It is made from steel and configured for the rear right side, with a Gen 1 bearing design and the mounting points needed for proper suspension and wheel-end alignment. This part cross-references BMW OE number 33326774808 for the same application.
Compatible With 2007-2016 BMW 328i, rear right; 2007-2015 BMW 335i, rear right; 2008-2013 BMW 135i, rear right; 2013 BMW 135is, rear right; 2011-2013 BMW 325i, rear right; 2009-2013 BMW 328i xDrive, rear right; 2009-2013 BMW 335i xDrive, rear right; 2011-2013 BMW 335is, rear right; 2007-2008 BMW 328xi, rear right; 2007-2008 BMW 335xi, rear right; 2001-2007 BMW 330i, rear right; 2001-2006 BMW 325xi, rear right; and 2001-2006 BMW 330xi, rear right.
What It Helps Fix
- Rear suspension noise from a damaged knuckle or bearing area
- Uneven wheel alignment caused by worn suspension mounting points
- Handling issues related to a bent or cracked rear knuckle
- Wheel-end instability after impact or corrosion damage
- Failed rear suspension service on BMW 328i, 335i, or 135i models
Installation Notes and Tips
Confirm rear right fitment before installation and compare the original knuckle to the replacement for mounting-hole layout, bearing generation, and dimensions. Transfer or source the required hub, bearing, ball joint, and hardware separately as needed. After installation, perform a professional alignment to verify rear suspension geometry.
Quality Assurance
Dorman designs this suspension knuckle as a reliable replacement for the original component and subjects it to testing for fit and function on the listed BMW applications. Part number 698-258 is built to meet standard replacement expectations for rear suspension service.
