Dorman 698-259 Suspension Knuckle - Rear Left
Dorman 698-259 Rear Left Suspension Knuckle
Restore rear suspension geometry with this Dorman suspension knuckle, engineered as a standard replacement for the original rear left knuckle on select BMW applications. Dorman 698-259 is built from steel and tested for reliable fit and function on BMW 3 Series and 1 Series rear suspension setups.
Key Features
- Steel construction for strength in a critical suspension mounting point
- Black finish
- Gen 1 bearing generation design
- Standard replacement grade for OE-style service
- Rear left position application
- Designed for vehicles that do not use an included hub, bearing, ball joint, or mounting hardware with this part
Detailed Description
This suspension knuckle is precision-engineered and rigorously tested to replace the original rear knuckle on specific BMW models. It is a direct-fit rear left suspension knuckle for applications including BMW 328i, 335i, 135i, 325i, 328i xDrive, 335i xDrive, 335is, 328xi, 335xi, 330i, 325xi, and 330xi. The Dorman 698-259 uses a steel body with a 13-inch length, 8.4-inch width, and 3.04-inch inside diameter, making it a practical OE-style solution for rear suspension service. This part cross-references BMW 33326774807 for the same application.
Vehicle Fitment
- Fits 2007-2016 BMW 328i, rear left.
- Fits 2007-2015 BMW 335i, rear left.
- Fits 2008-2013 BMW 135i, rear left.
- Fits 2013 BMW 135is, rear left.
- Fits 2011-2013 BMW 325i, rear left.
- Fits 2009-2013 BMW 328i xDrive, rear left.
- Fits 2009-2013 BMW 335i xDrive, rear left.
- Fits 2011-2013 BMW 335is, rear left.
- Fits 2007-2008 BMW 328xi, rear left.
- Fits 2007-2008 BMW 335xi, rear left.
- Fits 2001-2007 BMW 330i, rear left.
- Fits 2001-2006 BMW 325xi, rear left.
- Fits 2001-2006 BMW 330xi, rear left.
Common Repair Uses
- Replacing a damaged rear left suspension knuckle after impact or curb contact
- Correcting rear suspension mounting issues on BMW 328i and BMW 335i models
- Restoring proper wheel and suspension alignment after knuckle wear or deformation
- Addressing noise, looseness, or handling changes tied to a worn rear knuckle assembly
- Servicing rear suspension on BMW 135i, 325i, and xDrive/xi applications
Installation Notes and Tips
Verify rear left fitment by year, model, and drivetrain before installation. Transfer or source any required components separately, since this knuckle does not include a hub, bearing, ball joint, or mounting hardware. Inspect related suspension parts, fasteners, and alignment settings during replacement to ensure proper rear suspension geometry after service.
Quality Assurance
Dorman manufactures this part as a standard replacement suspension component and subjects it to testing for dependable fit and function on the listed BMW applications. The design follows OE-style replacement requirements for rear suspension repair.
Original: $157.73
-65%$157.73
$55.21Dorman 698-259 Suspension Knuckle - Rear Left
Dorman 698-259 Rear Left Suspension Knuckle
Restore rear suspension geometry with this Dorman suspension knuckle, engineered as a standard replacement for the original rear left knuckle on select BMW applications. Dorman 698-259 is built from steel and tested for reliable fit and function on BMW 3 Series and 1 Series rear suspension setups.
Key Features
- Steel construction for strength in a critical suspension mounting point
- Black finish
- Gen 1 bearing generation design
- Standard replacement grade for OE-style service
- Rear left position application
- Designed for vehicles that do not use an included hub, bearing, ball joint, or mounting hardware with this part
Detailed Description
This suspension knuckle is precision-engineered and rigorously tested to replace the original rear knuckle on specific BMW models. It is a direct-fit rear left suspension knuckle for applications including BMW 328i, 335i, 135i, 325i, 328i xDrive, 335i xDrive, 335is, 328xi, 335xi, 330i, 325xi, and 330xi. The Dorman 698-259 uses a steel body with a 13-inch length, 8.4-inch width, and 3.04-inch inside diameter, making it a practical OE-style solution for rear suspension service. This part cross-references BMW 33326774807 for the same application.
Vehicle Fitment
- Fits 2007-2016 BMW 328i, rear left.
- Fits 2007-2015 BMW 335i, rear left.
- Fits 2008-2013 BMW 135i, rear left.
- Fits 2013 BMW 135is, rear left.
- Fits 2011-2013 BMW 325i, rear left.
- Fits 2009-2013 BMW 328i xDrive, rear left.
- Fits 2009-2013 BMW 335i xDrive, rear left.
- Fits 2011-2013 BMW 335is, rear left.
- Fits 2007-2008 BMW 328xi, rear left.
- Fits 2007-2008 BMW 335xi, rear left.
- Fits 2001-2007 BMW 330i, rear left.
- Fits 2001-2006 BMW 325xi, rear left.
- Fits 2001-2006 BMW 330xi, rear left.
Common Repair Uses
- Replacing a damaged rear left suspension knuckle after impact or curb contact
- Correcting rear suspension mounting issues on BMW 328i and BMW 335i models
- Restoring proper wheel and suspension alignment after knuckle wear or deformation
- Addressing noise, looseness, or handling changes tied to a worn rear knuckle assembly
- Servicing rear suspension on BMW 135i, 325i, and xDrive/xi applications
Installation Notes and Tips
Verify rear left fitment by year, model, and drivetrain before installation. Transfer or source any required components separately, since this knuckle does not include a hub, bearing, ball joint, or mounting hardware. Inspect related suspension parts, fasteners, and alignment settings during replacement to ensure proper rear suspension geometry after service.
Quality Assurance
Dorman manufactures this part as a standard replacement suspension component and subjects it to testing for dependable fit and function on the listed BMW applications. The design follows OE-style replacement requirements for rear suspension repair.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 698-259 Rear Left Suspension Knuckle
Restore rear suspension geometry with this Dorman suspension knuckle, engineered as a standard replacement for the original rear left knuckle on select BMW applications. Dorman 698-259 is built from steel and tested for reliable fit and function on BMW 3 Series and 1 Series rear suspension setups.
Key Features
- Steel construction for strength in a critical suspension mounting point
- Black finish
- Gen 1 bearing generation design
- Standard replacement grade for OE-style service
- Rear left position application
- Designed for vehicles that do not use an included hub, bearing, ball joint, or mounting hardware with this part
Detailed Description
This suspension knuckle is precision-engineered and rigorously tested to replace the original rear knuckle on specific BMW models. It is a direct-fit rear left suspension knuckle for applications including BMW 328i, 335i, 135i, 325i, 328i xDrive, 335i xDrive, 335is, 328xi, 335xi, 330i, 325xi, and 330xi. The Dorman 698-259 uses a steel body with a 13-inch length, 8.4-inch width, and 3.04-inch inside diameter, making it a practical OE-style solution for rear suspension service. This part cross-references BMW 33326774807 for the same application.
Vehicle Fitment
- Fits 2007-2016 BMW 328i, rear left.
- Fits 2007-2015 BMW 335i, rear left.
- Fits 2008-2013 BMW 135i, rear left.
- Fits 2013 BMW 135is, rear left.
- Fits 2011-2013 BMW 325i, rear left.
- Fits 2009-2013 BMW 328i xDrive, rear left.
- Fits 2009-2013 BMW 335i xDrive, rear left.
- Fits 2011-2013 BMW 335is, rear left.
- Fits 2007-2008 BMW 328xi, rear left.
- Fits 2007-2008 BMW 335xi, rear left.
- Fits 2001-2007 BMW 330i, rear left.
- Fits 2001-2006 BMW 325xi, rear left.
- Fits 2001-2006 BMW 330xi, rear left.
Common Repair Uses
- Replacing a damaged rear left suspension knuckle after impact or curb contact
- Correcting rear suspension mounting issues on BMW 328i and BMW 335i models
- Restoring proper wheel and suspension alignment after knuckle wear or deformation
- Addressing noise, looseness, or handling changes tied to a worn rear knuckle assembly
- Servicing rear suspension on BMW 135i, 325i, and xDrive/xi applications
Installation Notes and Tips
Verify rear left fitment by year, model, and drivetrain before installation. Transfer or source any required components separately, since this knuckle does not include a hub, bearing, ball joint, or mounting hardware. Inspect related suspension parts, fasteners, and alignment settings during replacement to ensure proper rear suspension geometry after service.
Quality Assurance
Dorman manufactures this part as a standard replacement suspension component and subjects it to testing for dependable fit and function on the listed BMW applications. The design follows OE-style replacement requirements for rear suspension repair.
