Dorman 926-145 Drive Axle Shaft Assembly - Rear Left
Dorman 926-145 Rear Left Axle Shaft Assembly
Dorman 926-145 is a loaded drive axle shaft assembly for the rear left side of select Toyota Tundra models. It combines the axle shaft, hub bearing, seal, ABS tone ring, dust shield, backing plate, and wheel studs in one OE FIX assembly to simplify a repair that often requires a shop press.
Compatible With 2007-2016 Toyota Tundra, rear left. This Dorman axle shaft assembly is built with a steel shaft, carbon steel construction, a rust-resistant coating, and a 5 x 150 mm wheel bolt pattern for direct replacement service on the Toyota Tundra rear axle.
Key Features
- Loaded axle shaft assembly with critical components already assembled
- Rear left application for 2007-2016 Toyota Tundra
- Steel shaft with carbon steel construction
- Rust-resistant coating for added corrosion protection
- Hub bearing included for service-ready installation
- ABS tone ring and ABS sensor ring included
- Brake dust shield and brake backing plate included
- Wheel studs included with 14 mm thread diameter and 1.5 pitch
- 5 x 150 mm wheel bolt pattern
- 36 inboard splines and 36 outboard splines
Detailed Description
Dorman 926-145 is engineered as a direct replacement axle shaft assembly for the rear left position on the Toyota Tundra. It is designed to reduce the labor involved in axle service by supplying the shaft and bearing components already assembled, helping eliminate the need for a separate press operation during replacement. The assembly includes the axle shaft seal and axle O-ring, along with the hub bearing, ABS components, dust shield, and backing plate needed for a complete rear axle repair.
This part cross-references Toyota 423110C010 for the same application. Use Dorman 926-145 when servicing a 2007-2016 Toyota Tundra rear left axle shaft assembly and you need a replacement that matches the original spline count, bolt pattern, and ABS-related hardware layout.
What It Helps Fix
- Rear axle bearing noise or rough bearing operation
- Axle shaft wear at the rear left hub area
- ABS warning concerns related to the tone ring or sensor ring
- Corrosion at the axle assembly and surrounding components
- Time-consuming axle service that normally requires a press
Installation Notes and Tips
Verify rear left fitment before ordering and confirm the 5 x 150 mm wheel bolt pattern, 36-spline shaft configuration, and 893 mm shaft length against the original part. Inspect the axle seal surface, backing plate area, and ABS components during installation to help ensure proper seating and operation on the Toyota Tundra rear axle.
Quality Assurance
Dorman OE FIX assemblies are built to address common service challenges by combining the axle shaft and related wear components into one replacement unit. Part number 926-145 is manufactured with a rust-resistant coating and service-ready component layout for a straightforward repair on compatible Toyota Tundra applications.
Original: $827.07
-65%$827.07
$289.47Dorman 926-145 Drive Axle Shaft Assembly - Rear Left
Dorman 926-145 Rear Left Axle Shaft Assembly
Dorman 926-145 is a loaded drive axle shaft assembly for the rear left side of select Toyota Tundra models. It combines the axle shaft, hub bearing, seal, ABS tone ring, dust shield, backing plate, and wheel studs in one OE FIX assembly to simplify a repair that often requires a shop press.
Compatible With 2007-2016 Toyota Tundra, rear left. This Dorman axle shaft assembly is built with a steel shaft, carbon steel construction, a rust-resistant coating, and a 5 x 150 mm wheel bolt pattern for direct replacement service on the Toyota Tundra rear axle.
Key Features
- Loaded axle shaft assembly with critical components already assembled
- Rear left application for 2007-2016 Toyota Tundra
- Steel shaft with carbon steel construction
- Rust-resistant coating for added corrosion protection
- Hub bearing included for service-ready installation
- ABS tone ring and ABS sensor ring included
- Brake dust shield and brake backing plate included
- Wheel studs included with 14 mm thread diameter and 1.5 pitch
- 5 x 150 mm wheel bolt pattern
- 36 inboard splines and 36 outboard splines
Detailed Description
Dorman 926-145 is engineered as a direct replacement axle shaft assembly for the rear left position on the Toyota Tundra. It is designed to reduce the labor involved in axle service by supplying the shaft and bearing components already assembled, helping eliminate the need for a separate press operation during replacement. The assembly includes the axle shaft seal and axle O-ring, along with the hub bearing, ABS components, dust shield, and backing plate needed for a complete rear axle repair.
This part cross-references Toyota 423110C010 for the same application. Use Dorman 926-145 when servicing a 2007-2016 Toyota Tundra rear left axle shaft assembly and you need a replacement that matches the original spline count, bolt pattern, and ABS-related hardware layout.
What It Helps Fix
- Rear axle bearing noise or rough bearing operation
- Axle shaft wear at the rear left hub area
- ABS warning concerns related to the tone ring or sensor ring
- Corrosion at the axle assembly and surrounding components
- Time-consuming axle service that normally requires a press
Installation Notes and Tips
Verify rear left fitment before ordering and confirm the 5 x 150 mm wheel bolt pattern, 36-spline shaft configuration, and 893 mm shaft length against the original part. Inspect the axle seal surface, backing plate area, and ABS components during installation to help ensure proper seating and operation on the Toyota Tundra rear axle.
Quality Assurance
Dorman OE FIX assemblies are built to address common service challenges by combining the axle shaft and related wear components into one replacement unit. Part number 926-145 is manufactured with a rust-resistant coating and service-ready component layout for a straightforward repair on compatible Toyota Tundra applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman 926-145 Rear Left Axle Shaft Assembly
Dorman 926-145 is a loaded drive axle shaft assembly for the rear left side of select Toyota Tundra models. It combines the axle shaft, hub bearing, seal, ABS tone ring, dust shield, backing plate, and wheel studs in one OE FIX assembly to simplify a repair that often requires a shop press.
Compatible With 2007-2016 Toyota Tundra, rear left. This Dorman axle shaft assembly is built with a steel shaft, carbon steel construction, a rust-resistant coating, and a 5 x 150 mm wheel bolt pattern for direct replacement service on the Toyota Tundra rear axle.
Key Features
- Loaded axle shaft assembly with critical components already assembled
- Rear left application for 2007-2016 Toyota Tundra
- Steel shaft with carbon steel construction
- Rust-resistant coating for added corrosion protection
- Hub bearing included for service-ready installation
- ABS tone ring and ABS sensor ring included
- Brake dust shield and brake backing plate included
- Wheel studs included with 14 mm thread diameter and 1.5 pitch
- 5 x 150 mm wheel bolt pattern
- 36 inboard splines and 36 outboard splines
Detailed Description
Dorman 926-145 is engineered as a direct replacement axle shaft assembly for the rear left position on the Toyota Tundra. It is designed to reduce the labor involved in axle service by supplying the shaft and bearing components already assembled, helping eliminate the need for a separate press operation during replacement. The assembly includes the axle shaft seal and axle O-ring, along with the hub bearing, ABS components, dust shield, and backing plate needed for a complete rear axle repair.
This part cross-references Toyota 423110C010 for the same application. Use Dorman 926-145 when servicing a 2007-2016 Toyota Tundra rear left axle shaft assembly and you need a replacement that matches the original spline count, bolt pattern, and ABS-related hardware layout.
What It Helps Fix
- Rear axle bearing noise or rough bearing operation
- Axle shaft wear at the rear left hub area
- ABS warning concerns related to the tone ring or sensor ring
- Corrosion at the axle assembly and surrounding components
- Time-consuming axle service that normally requires a press
Installation Notes and Tips
Verify rear left fitment before ordering and confirm the 5 x 150 mm wheel bolt pattern, 36-spline shaft configuration, and 893 mm shaft length against the original part. Inspect the axle seal surface, backing plate area, and ABS components during installation to help ensure proper seating and operation on the Toyota Tundra rear axle.
Quality Assurance
Dorman OE FIX assemblies are built to address common service challenges by combining the axle shaft and related wear components into one replacement unit. Part number 926-145 is manufactured with a rust-resistant coating and service-ready component layout for a straightforward repair on compatible Toyota Tundra applications.
