Dorman BJ82495RD Suspension Ball Joint - Front Lower
Dorman RD Lower Ball Joint for Ram 1500
Restore front suspension integrity with the Dorman RD lower ball joint, part number BJ82495RD. This press-in suspension ball joint is built for severe-duty service on Ram 1500 and Ram 1500 Classic applications where front-end durability matters.
The RD, or Rugged Duty, product line is engineered for demanding use such as towing, hauling, off-road work, and emergency response service. For Ram 1500 front lower ball joint replacement, BJ82495RD uses a steel housing with a protective finish, a greaseable design, and a dust boot made from polychloroprene to help support long-term service in harsh conditions.
Key Features
- Fits 2009-2010 Dodge Ram 1500, front lower
- Fits 2011-2018 Ram 1500, front lower
- Fits 2019-2024 Ram 1500 Classic, front lower
- Press-in suspension ball joint design
- Steel construction with corrosion-resistant coating
- Grease fitting included for serviceable maintenance
- Dust boot included to help protect the joint
- Castle nut, cotter pin, cotter pin hole, and mounting hardware included
- Wrench size: 21 mm
- Stud type: taper
Detailed Description
Dorman RD BJ82495RD is a front lower suspension ball joint designed as a direct replacement for specified Dodge Ram 1500 and Ram 1500 Classic trucks. The rugged-duty chassis design uses quenched and tempered steel in the housing for added durability, along with a protective coating to improve corrosion resistance. The joint is greaseable and preloaded with premium grease, helping support smoother service intervals when regular maintenance is performed.
This part cross-references MOOG Chassis Products K500286 for the same application. It is a practical choice for Ram 1500 front lower ball joint service when the original joint has looseness, wear, or contamination from damaged boots. BJ82495RD also cross-references Delphi TC6149 for the same application.
Common Problems This Part Can Address
- Front suspension clunking or popping over bumps
- Excessive play in the lower ball joint
- Uneven tire wear caused by worn suspension geometry
- Steering looseness or wandering at the front end
- Boot damage that allows grease loss and contamination
Installation Notes and Tips
This is a press-in lower ball joint, so proper removal and installation tools are required. Verify the vehicle application by year, make, model, and front lower position before service. Inspect the control arm, steering knuckle interface, and surrounding hardware for wear or damage during replacement. After installation, lubricate the joint through the grease fitting according to the vehicle service schedule.
Quality Assurance
Dorman RD chassis components are built for severe-duty service and are engineered to outperform standard aftermarket parts under demanding use. BJ82495RD is manufactured with corrosion-resistant materials and serviceable features to support long-term reliability on Ram 1500 and Ram 1500 Classic front suspension repairs.
Original: $57.00
-65%$57.00
$19.95Dorman BJ82495RD Suspension Ball Joint - Front Lower
Dorman RD Lower Ball Joint for Ram 1500
Restore front suspension integrity with the Dorman RD lower ball joint, part number BJ82495RD. This press-in suspension ball joint is built for severe-duty service on Ram 1500 and Ram 1500 Classic applications where front-end durability matters.
The RD, or Rugged Duty, product line is engineered for demanding use such as towing, hauling, off-road work, and emergency response service. For Ram 1500 front lower ball joint replacement, BJ82495RD uses a steel housing with a protective finish, a greaseable design, and a dust boot made from polychloroprene to help support long-term service in harsh conditions.
Key Features
- Fits 2009-2010 Dodge Ram 1500, front lower
- Fits 2011-2018 Ram 1500, front lower
- Fits 2019-2024 Ram 1500 Classic, front lower
- Press-in suspension ball joint design
- Steel construction with corrosion-resistant coating
- Grease fitting included for serviceable maintenance
- Dust boot included to help protect the joint
- Castle nut, cotter pin, cotter pin hole, and mounting hardware included
- Wrench size: 21 mm
- Stud type: taper
Detailed Description
Dorman RD BJ82495RD is a front lower suspension ball joint designed as a direct replacement for specified Dodge Ram 1500 and Ram 1500 Classic trucks. The rugged-duty chassis design uses quenched and tempered steel in the housing for added durability, along with a protective coating to improve corrosion resistance. The joint is greaseable and preloaded with premium grease, helping support smoother service intervals when regular maintenance is performed.
This part cross-references MOOG Chassis Products K500286 for the same application. It is a practical choice for Ram 1500 front lower ball joint service when the original joint has looseness, wear, or contamination from damaged boots. BJ82495RD also cross-references Delphi TC6149 for the same application.
Common Problems This Part Can Address
- Front suspension clunking or popping over bumps
- Excessive play in the lower ball joint
- Uneven tire wear caused by worn suspension geometry
- Steering looseness or wandering at the front end
- Boot damage that allows grease loss and contamination
Installation Notes and Tips
This is a press-in lower ball joint, so proper removal and installation tools are required. Verify the vehicle application by year, make, model, and front lower position before service. Inspect the control arm, steering knuckle interface, and surrounding hardware for wear or damage during replacement. After installation, lubricate the joint through the grease fitting according to the vehicle service schedule.
Quality Assurance
Dorman RD chassis components are built for severe-duty service and are engineered to outperform standard aftermarket parts under demanding use. BJ82495RD is manufactured with corrosion-resistant materials and serviceable features to support long-term reliability on Ram 1500 and Ram 1500 Classic front suspension repairs.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Lower Ball Joint for Ram 1500
Restore front suspension integrity with the Dorman RD lower ball joint, part number BJ82495RD. This press-in suspension ball joint is built for severe-duty service on Ram 1500 and Ram 1500 Classic applications where front-end durability matters.
The RD, or Rugged Duty, product line is engineered for demanding use such as towing, hauling, off-road work, and emergency response service. For Ram 1500 front lower ball joint replacement, BJ82495RD uses a steel housing with a protective finish, a greaseable design, and a dust boot made from polychloroprene to help support long-term service in harsh conditions.
Key Features
- Fits 2009-2010 Dodge Ram 1500, front lower
- Fits 2011-2018 Ram 1500, front lower
- Fits 2019-2024 Ram 1500 Classic, front lower
- Press-in suspension ball joint design
- Steel construction with corrosion-resistant coating
- Grease fitting included for serviceable maintenance
- Dust boot included to help protect the joint
- Castle nut, cotter pin, cotter pin hole, and mounting hardware included
- Wrench size: 21 mm
- Stud type: taper
Detailed Description
Dorman RD BJ82495RD is a front lower suspension ball joint designed as a direct replacement for specified Dodge Ram 1500 and Ram 1500 Classic trucks. The rugged-duty chassis design uses quenched and tempered steel in the housing for added durability, along with a protective coating to improve corrosion resistance. The joint is greaseable and preloaded with premium grease, helping support smoother service intervals when regular maintenance is performed.
This part cross-references MOOG Chassis Products K500286 for the same application. It is a practical choice for Ram 1500 front lower ball joint service when the original joint has looseness, wear, or contamination from damaged boots. BJ82495RD also cross-references Delphi TC6149 for the same application.
Common Problems This Part Can Address
- Front suspension clunking or popping over bumps
- Excessive play in the lower ball joint
- Uneven tire wear caused by worn suspension geometry
- Steering looseness or wandering at the front end
- Boot damage that allows grease loss and contamination
Installation Notes and Tips
This is a press-in lower ball joint, so proper removal and installation tools are required. Verify the vehicle application by year, make, model, and front lower position before service. Inspect the control arm, steering knuckle interface, and surrounding hardware for wear or damage during replacement. After installation, lubricate the joint through the grease fitting according to the vehicle service schedule.
Quality Assurance
Dorman RD chassis components are built for severe-duty service and are engineered to outperform standard aftermarket parts under demanding use. BJ82495RD is manufactured with corrosion-resistant materials and serviceable features to support long-term reliability on Ram 1500 and Ram 1500 Classic front suspension repairs.
