Dorman BJ86375RD Suspension Ball Joint - Front Lower
Dorman RD Lower Ball Joint for Severe Duty Use
Dorman RD BJ86375RD is a front lower suspension ball joint built for demanding service on Ford, Mazda, Mercury, and Lincoln applications. It is a threaded, press-in replacement with a tapered stud, greaseable design, dust boot, and corrosion-resistant hardware details for vehicles that see towing, hauling, off-road use, and frequent suspension load.
Key Features
- Front lower suspension ball joint for specified Ford Ranger, Explorer, F-150, Expedition, and related applications
- RD - Rugged Duty line for severe-duty service conditions
- Quenched and tempered steel housing for added strength
- Protective coating for improved corrosion resistance
- Greaseable design with pre-loaded premium grease where applicable
- Dust boot with molded-in standoffs to help retain lubrication
- Threaded, press-in mounting style with tapered stud
- Castle nut, dust boot, mounting hardware, and cotter pin hole included
Built for Rugged Duty Applications
The Dorman RD line is engineered for vehicles that work hard and stay in service under severe conditions. BJ86375RD uses a steel ball joint housing with a protective finish and corrosion-resistant hardware to support long-term durability in front lower suspension service. This part cross-references MOOG Chassis Products (e.g., K8695T, K500108) for the same application. It is a direct replacement choice for front lower suspension repair on 1997-2003 Ford F-150, 1995-2010 Ford Explorer, and 1998-2012 Ford Ranger applications, along with other listed Ford, Mazda, Mercury, and Lincoln models. Part number BJ86375RD is also a useful reference when matching severe-duty suspension components for these platforms.
Common Problems This Part Can Address
- Front-end looseness or play from a worn lower ball joint
- Clunking or popping noises during steering or suspension movement
- Uneven tire wear caused by suspension joint wear
- Steering instability on high-mileage work trucks and SUVs
- Corrosion-related failure in exposed undercarriage suspension parts
Installation Notes and Tips
Verify press-in fitment, threaded design, and front lower position before installation. Inspect the control arm, knuckle, and surrounding suspension components for wear before pressing in the new joint. Use the correct wrench size and follow vehicle-specific service procedures for torque, alignment, and cotter pin installation. For vehicles such as the Ford Ranger, Ford Explorer, and Ford F-150, a professional alignment is recommended after front suspension service. Confirm application details against the vehicle’s year, make, model, and position before ordering BJ86375RD.
Quality Assurance
Dorman RD chassis parts are built for severe-duty service and are manufactured with corrosion-resistant materials and coatings to support dependable suspension repair. BJ86375RD is designed as a replacement for specified OE applications where downtime is not an option.
Compatible Vehicles
- Fits 1998-2012 Ford Ranger, Front Lower
- Fits 1995-2010 Ford Explorer, Front Lower
- Fits 2007-2010 Ford Explorer Sport Trac, Front Lower
- Fits 2001-2005 Ford Explorer Sport Trac, Front Lower
- Fits 1998-2010 Mazda B4000, Front Lower
- Fits 1997-2010 Mercury Mountaineer, Front Lower
- Fits 1998-2008 Mazda B3000, Front Lower
- Fits 2003-2005 Lincoln Aviator, Front Lower
- Fits 2004 Ford F-150 Heritage, Front Lower
- Fits 2001-2003 Ford Explorer Sport, Front Lower
- Fits 1997-2003 Ford F-150, Front Lower
- Fits 2002-2003 Lincoln Blackwood, Front Lower
- Fits 1997-2002 Ford Expedition, Front Lower
- Fits 1998-2002 Lincoln Navigator, Front Lower
- Fits 2001 Mazda B2500, Front Lower
- Fits 1999 Mazda B2500, Front Lower
- Fits 1997-1999 Ford F-250, Front Lower; Under 8,500 Lb. GVW
Dorman BJ86375RD Suspension Ball Joint - Front Lower
Dorman RD Lower Ball Joint for Severe Duty Use
Dorman RD BJ86375RD is a front lower suspension ball joint built for demanding service on Ford, Mazda, Mercury, and Lincoln applications. It is a threaded, press-in replacement with a tapered stud, greaseable design, dust boot, and corrosion-resistant hardware details for vehicles that see towing, hauling, off-road use, and frequent suspension load.
Key Features
- Front lower suspension ball joint for specified Ford Ranger, Explorer, F-150, Expedition, and related applications
- RD - Rugged Duty line for severe-duty service conditions
- Quenched and tempered steel housing for added strength
- Protective coating for improved corrosion resistance
- Greaseable design with pre-loaded premium grease where applicable
- Dust boot with molded-in standoffs to help retain lubrication
- Threaded, press-in mounting style with tapered stud
- Castle nut, dust boot, mounting hardware, and cotter pin hole included
Built for Rugged Duty Applications
The Dorman RD line is engineered for vehicles that work hard and stay in service under severe conditions. BJ86375RD uses a steel ball joint housing with a protective finish and corrosion-resistant hardware to support long-term durability in front lower suspension service. This part cross-references MOOG Chassis Products (e.g., K8695T, K500108) for the same application. It is a direct replacement choice for front lower suspension repair on 1997-2003 Ford F-150, 1995-2010 Ford Explorer, and 1998-2012 Ford Ranger applications, along with other listed Ford, Mazda, Mercury, and Lincoln models. Part number BJ86375RD is also a useful reference when matching severe-duty suspension components for these platforms.
Common Problems This Part Can Address
- Front-end looseness or play from a worn lower ball joint
- Clunking or popping noises during steering or suspension movement
- Uneven tire wear caused by suspension joint wear
- Steering instability on high-mileage work trucks and SUVs
- Corrosion-related failure in exposed undercarriage suspension parts
Installation Notes and Tips
Verify press-in fitment, threaded design, and front lower position before installation. Inspect the control arm, knuckle, and surrounding suspension components for wear before pressing in the new joint. Use the correct wrench size and follow vehicle-specific service procedures for torque, alignment, and cotter pin installation. For vehicles such as the Ford Ranger, Ford Explorer, and Ford F-150, a professional alignment is recommended after front suspension service. Confirm application details against the vehicle’s year, make, model, and position before ordering BJ86375RD.
Quality Assurance
Dorman RD chassis parts are built for severe-duty service and are manufactured with corrosion-resistant materials and coatings to support dependable suspension repair. BJ86375RD is designed as a replacement for specified OE applications where downtime is not an option.
Compatible Vehicles
- Fits 1998-2012 Ford Ranger, Front Lower
- Fits 1995-2010 Ford Explorer, Front Lower
- Fits 2007-2010 Ford Explorer Sport Trac, Front Lower
- Fits 2001-2005 Ford Explorer Sport Trac, Front Lower
- Fits 1998-2010 Mazda B4000, Front Lower
- Fits 1997-2010 Mercury Mountaineer, Front Lower
- Fits 1998-2008 Mazda B3000, Front Lower
- Fits 2003-2005 Lincoln Aviator, Front Lower
- Fits 2004 Ford F-150 Heritage, Front Lower
- Fits 2001-2003 Ford Explorer Sport, Front Lower
- Fits 1997-2003 Ford F-150, Front Lower
- Fits 2002-2003 Lincoln Blackwood, Front Lower
- Fits 1997-2002 Ford Expedition, Front Lower
- Fits 1998-2002 Lincoln Navigator, Front Lower
- Fits 2001 Mazda B2500, Front Lower
- Fits 1999 Mazda B2500, Front Lower
- Fits 1997-1999 Ford F-250, Front Lower; Under 8,500 Lb. GVW
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Lower Ball Joint for Severe Duty Use
Dorman RD BJ86375RD is a front lower suspension ball joint built for demanding service on Ford, Mazda, Mercury, and Lincoln applications. It is a threaded, press-in replacement with a tapered stud, greaseable design, dust boot, and corrosion-resistant hardware details for vehicles that see towing, hauling, off-road use, and frequent suspension load.
Key Features
- Front lower suspension ball joint for specified Ford Ranger, Explorer, F-150, Expedition, and related applications
- RD - Rugged Duty line for severe-duty service conditions
- Quenched and tempered steel housing for added strength
- Protective coating for improved corrosion resistance
- Greaseable design with pre-loaded premium grease where applicable
- Dust boot with molded-in standoffs to help retain lubrication
- Threaded, press-in mounting style with tapered stud
- Castle nut, dust boot, mounting hardware, and cotter pin hole included
Built for Rugged Duty Applications
The Dorman RD line is engineered for vehicles that work hard and stay in service under severe conditions. BJ86375RD uses a steel ball joint housing with a protective finish and corrosion-resistant hardware to support long-term durability in front lower suspension service. This part cross-references MOOG Chassis Products (e.g., K8695T, K500108) for the same application. It is a direct replacement choice for front lower suspension repair on 1997-2003 Ford F-150, 1995-2010 Ford Explorer, and 1998-2012 Ford Ranger applications, along with other listed Ford, Mazda, Mercury, and Lincoln models. Part number BJ86375RD is also a useful reference when matching severe-duty suspension components for these platforms.
Common Problems This Part Can Address
- Front-end looseness or play from a worn lower ball joint
- Clunking or popping noises during steering or suspension movement
- Uneven tire wear caused by suspension joint wear
- Steering instability on high-mileage work trucks and SUVs
- Corrosion-related failure in exposed undercarriage suspension parts
Installation Notes and Tips
Verify press-in fitment, threaded design, and front lower position before installation. Inspect the control arm, knuckle, and surrounding suspension components for wear before pressing in the new joint. Use the correct wrench size and follow vehicle-specific service procedures for torque, alignment, and cotter pin installation. For vehicles such as the Ford Ranger, Ford Explorer, and Ford F-150, a professional alignment is recommended after front suspension service. Confirm application details against the vehicle’s year, make, model, and position before ordering BJ86375RD.
Quality Assurance
Dorman RD chassis parts are built for severe-duty service and are manufactured with corrosion-resistant materials and coatings to support dependable suspension repair. BJ86375RD is designed as a replacement for specified OE applications where downtime is not an option.
Compatible Vehicles
- Fits 1998-2012 Ford Ranger, Front Lower
- Fits 1995-2010 Ford Explorer, Front Lower
- Fits 2007-2010 Ford Explorer Sport Trac, Front Lower
- Fits 2001-2005 Ford Explorer Sport Trac, Front Lower
- Fits 1998-2010 Mazda B4000, Front Lower
- Fits 1997-2010 Mercury Mountaineer, Front Lower
- Fits 1998-2008 Mazda B3000, Front Lower
- Fits 2003-2005 Lincoln Aviator, Front Lower
- Fits 2004 Ford F-150 Heritage, Front Lower
- Fits 2001-2003 Ford Explorer Sport, Front Lower
- Fits 1997-2003 Ford F-150, Front Lower
- Fits 2002-2003 Lincoln Blackwood, Front Lower
- Fits 1997-2002 Ford Expedition, Front Lower
- Fits 1998-2002 Lincoln Navigator, Front Lower
- Fits 2001 Mazda B2500, Front Lower
- Fits 1999 Mazda B2500, Front Lower
- Fits 1997-1999 Ford F-250, Front Lower; Under 8,500 Lb. GVW
