Dorman BJ87005XL Suspension Ball Joint - Front Lower
Dorman Premium XL Ball Joint for Ford and Lincoln
The Dorman Premium XL BJ87005XL is a front lower suspension ball joint built for direct-fit service on select Ford and Lincoln applications. It combines a hardened stud, a highly polished ball, and a maintenance-free polymer bearing to support smooth steering and consistent suspension movement.
Compatible with 2015-2020 Ford F-150, 2018-2020 Ford Expedition, 2017-2020 Ford GT, and 2018-2020 Lincoln Navigator in the front lower position, this threaded press-in ball joint is built for repair work that demands accurate fitment and durable operation. The BJ87005XL also features I.C.E. synthetic grease and enhanced corrosion resistance for extended service life.
Key Features
- Premium XL suspension ball joint from Dorman
- Front lower fitment for select Ford F-150, Expedition, GT, and Lincoln Navigator applications
- Hardened stud and highly polished ball for smooth articulation
- Maintenance-free polymer bearing
- I.C.E. synthetic grease for internal lubrication
- Threaded, press-in design with tapered stud type
- Dust boot included for added protection
- Steel construction with gray finish and corrosion-resistant design
- Part number BJ87005XL for ordering and cross-reference
Detailed Description
Dorman Premium XL BJ87005XL is engineered as a suspension ball joint replacement for front lower service on select 2015-2020 Ford F-150, 2018-2020 Ford Expedition, 2017-2020 Ford GT, and 2018-2020 Lincoln Navigator models. The design uses a hardened stud and polished ball surface to promote controlled movement, while the polymer bearing helps reduce maintenance requirements. The threaded, press-in configuration supports OE-style suspension repair where precise fitment matters. This part cross-references MOOG Chassis Products K500318 for the same application.
Common Repair Uses
- Restores loose or worn front suspension joint movement
- Addresses clunking or popping from the front lower suspension
- Helps correct steering play caused by ball joint wear
- Supports repair of uneven tire wear linked to suspension looseness
- Replaces a damaged or corroded front lower ball joint
Installation Notes and Tips
Install BJ87005XL in the front lower position only on the listed Ford and Lincoln applications. Verify press-in fitment, stud taper, and thread dimensions before installation. Because this design does not include a grease fitting, service access is not required after installation. Use proper suspension service procedures and torque specifications for the vehicle being repaired.
Quality Assurance
This Dorman Premium XL ball joint is built with steel construction, a dust boot, and premium corrosion resistance to support long-term suspension service. The product line focuses on extended-life replacement components for demanding chassis repairs.
Dorman BJ87005XL Suspension Ball Joint - Front Lower
Dorman Premium XL Ball Joint for Ford and Lincoln
The Dorman Premium XL BJ87005XL is a front lower suspension ball joint built for direct-fit service on select Ford and Lincoln applications. It combines a hardened stud, a highly polished ball, and a maintenance-free polymer bearing to support smooth steering and consistent suspension movement.
Compatible with 2015-2020 Ford F-150, 2018-2020 Ford Expedition, 2017-2020 Ford GT, and 2018-2020 Lincoln Navigator in the front lower position, this threaded press-in ball joint is built for repair work that demands accurate fitment and durable operation. The BJ87005XL also features I.C.E. synthetic grease and enhanced corrosion resistance for extended service life.
Key Features
- Premium XL suspension ball joint from Dorman
- Front lower fitment for select Ford F-150, Expedition, GT, and Lincoln Navigator applications
- Hardened stud and highly polished ball for smooth articulation
- Maintenance-free polymer bearing
- I.C.E. synthetic grease for internal lubrication
- Threaded, press-in design with tapered stud type
- Dust boot included for added protection
- Steel construction with gray finish and corrosion-resistant design
- Part number BJ87005XL for ordering and cross-reference
Detailed Description
Dorman Premium XL BJ87005XL is engineered as a suspension ball joint replacement for front lower service on select 2015-2020 Ford F-150, 2018-2020 Ford Expedition, 2017-2020 Ford GT, and 2018-2020 Lincoln Navigator models. The design uses a hardened stud and polished ball surface to promote controlled movement, while the polymer bearing helps reduce maintenance requirements. The threaded, press-in configuration supports OE-style suspension repair where precise fitment matters. This part cross-references MOOG Chassis Products K500318 for the same application.
Common Repair Uses
- Restores loose or worn front suspension joint movement
- Addresses clunking or popping from the front lower suspension
- Helps correct steering play caused by ball joint wear
- Supports repair of uneven tire wear linked to suspension looseness
- Replaces a damaged or corroded front lower ball joint
Installation Notes and Tips
Install BJ87005XL in the front lower position only on the listed Ford and Lincoln applications. Verify press-in fitment, stud taper, and thread dimensions before installation. Because this design does not include a grease fitting, service access is not required after installation. Use proper suspension service procedures and torque specifications for the vehicle being repaired.
Quality Assurance
This Dorman Premium XL ball joint is built with steel construction, a dust boot, and premium corrosion resistance to support long-term suspension service. The product line focuses on extended-life replacement components for demanding chassis repairs.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman Premium XL Ball Joint for Ford and Lincoln
The Dorman Premium XL BJ87005XL is a front lower suspension ball joint built for direct-fit service on select Ford and Lincoln applications. It combines a hardened stud, a highly polished ball, and a maintenance-free polymer bearing to support smooth steering and consistent suspension movement.
Compatible with 2015-2020 Ford F-150, 2018-2020 Ford Expedition, 2017-2020 Ford GT, and 2018-2020 Lincoln Navigator in the front lower position, this threaded press-in ball joint is built for repair work that demands accurate fitment and durable operation. The BJ87005XL also features I.C.E. synthetic grease and enhanced corrosion resistance for extended service life.
Key Features
- Premium XL suspension ball joint from Dorman
- Front lower fitment for select Ford F-150, Expedition, GT, and Lincoln Navigator applications
- Hardened stud and highly polished ball for smooth articulation
- Maintenance-free polymer bearing
- I.C.E. synthetic grease for internal lubrication
- Threaded, press-in design with tapered stud type
- Dust boot included for added protection
- Steel construction with gray finish and corrosion-resistant design
- Part number BJ87005XL for ordering and cross-reference
Detailed Description
Dorman Premium XL BJ87005XL is engineered as a suspension ball joint replacement for front lower service on select 2015-2020 Ford F-150, 2018-2020 Ford Expedition, 2017-2020 Ford GT, and 2018-2020 Lincoln Navigator models. The design uses a hardened stud and polished ball surface to promote controlled movement, while the polymer bearing helps reduce maintenance requirements. The threaded, press-in configuration supports OE-style suspension repair where precise fitment matters. This part cross-references MOOG Chassis Products K500318 for the same application.
Common Repair Uses
- Restores loose or worn front suspension joint movement
- Addresses clunking or popping from the front lower suspension
- Helps correct steering play caused by ball joint wear
- Supports repair of uneven tire wear linked to suspension looseness
- Replaces a damaged or corroded front lower ball joint
Installation Notes and Tips
Install BJ87005XL in the front lower position only on the listed Ford and Lincoln applications. Verify press-in fitment, stud taper, and thread dimensions before installation. Because this design does not include a grease fitting, service access is not required after installation. Use proper suspension service procedures and torque specifications for the vehicle being repaired.
Quality Assurance
This Dorman Premium XL ball joint is built with steel construction, a dust boot, and premium corrosion resistance to support long-term suspension service. The product line focuses on extended-life replacement components for demanding chassis repairs.
