Dorman CB90267RD Suspension Control Arm and Ball Joint Assembly - Front Left Upper
Dorman RD Front Left Upper Control Arm
Restore front suspension integrity on heavy-duty GM and Cadillac applications with the Dorman RD control arm and ball joint assembly, part number CB90267RD. This front left upper assembly is built for severe-duty service on vehicles that work hard in towing, hauling, off-road, and emergency-response conditions.
The RD, or Rugged Duty, line is Dorman’s severe-service chassis range. For this application, the ball joint housing uses quenched and tempered steel, and the assembly includes corrosion-resistant finishes on key components to improve durability in demanding environments. CB90267RD is a direct replacement for specified Cadillac Escalade, Chevrolet Silverado 1500, Tahoe, and GMC Sierra 1500 applications.
- Front left upper suspension control arm and ball joint assembly
- Steel control arm construction with black finish
- Pre-greased ball joint for streamlined service
- Threaded ball joint stud with 14 mm thread diameter
- Ball joint installed and bushings included
- Mounting hardware included
- No grease fitting included
- Standard replacement grade for specified vehicles
Built for Rugged Duty Service
Dorman RD products are engineered for severe-duty use where suspension reliability matters. CB90267RD uses a forged/cast control arm design and a steel bushing material to handle demanding front-end loads. The pre-loaded grease boot helps retain lubrication, while the corrosion-resistant coating on the ball joint housing and included hardware supports long-term service in harsh conditions. This part number, CB90267RD, is a practical OE-style replacement for front suspension repair on 2007-2016 Cadillac Escalade, Chevrolet Silverado 1500, Chevrolet Tahoe, and GMC Sierra 1500 platforms.
This part cross-references MOOG Chassis Products CK80669 and Mevotech TTX CTXK80669 for the same application.
Common Problems This Part Can Address
- Front-end clunking or looseness from a worn upper control arm assembly
- Uneven tire wear caused by suspension play
- Steering wander or reduced directional stability
- Ball joint wear on severe-duty trucks and SUVs
- Corrosion-related suspension service issues in harsh environments
Installation Notes and Tips
Compatible With 2015-2016 Cadillac Escalade, front left upper; 2015-2016 Cadillac Escalade ESV, front left upper; 2014-2016 Chevrolet Cheyenne, front left upper; 2014-2016 Chevrolet Silverado 1500, front left upper; 2015-2016 Chevrolet Tahoe, front left upper; 2014-2016 GMC Sierra 1500, front left upper; 2015-2016 GMC Yukon, front left upper; and 2015 GMC Sierra, front left upper. Also compatible with 2007-2014 Cadillac Escalade, Escalade ESV, Chevrolet Suburban 1500, Tahoe, GMC Yukon, and Yukon XL 1500, plus 2007-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Chevrolet Cheyenne, Chevrolet Silverado 1500, GMC Sierra, and GMC Sierra 1500, front left upper.
Verify the vehicle’s suspension configuration and position before installation. Because the ball joint is pre-installed, inspect adjacent wear items such as bushings, fasteners, and alignment-related components during service. A professional alignment is recommended after replacement to restore proper suspension geometry.
Quality Assurance
Dorman RD chassis components are built for severe-duty service applications and are manufactured with corrosion-resistant materials and finishes where applicable. The rugged-duty design focus, pre-greased joint, and included hardware support dependable service on work trucks, SUVs, and emergency vehicles that cannot afford downtime.
Dorman CB90267RD Suspension Control Arm and Ball Joint Assembly - Front Left Upper
Dorman RD Front Left Upper Control Arm
Restore front suspension integrity on heavy-duty GM and Cadillac applications with the Dorman RD control arm and ball joint assembly, part number CB90267RD. This front left upper assembly is built for severe-duty service on vehicles that work hard in towing, hauling, off-road, and emergency-response conditions.
The RD, or Rugged Duty, line is Dorman’s severe-service chassis range. For this application, the ball joint housing uses quenched and tempered steel, and the assembly includes corrosion-resistant finishes on key components to improve durability in demanding environments. CB90267RD is a direct replacement for specified Cadillac Escalade, Chevrolet Silverado 1500, Tahoe, and GMC Sierra 1500 applications.
- Front left upper suspension control arm and ball joint assembly
- Steel control arm construction with black finish
- Pre-greased ball joint for streamlined service
- Threaded ball joint stud with 14 mm thread diameter
- Ball joint installed and bushings included
- Mounting hardware included
- No grease fitting included
- Standard replacement grade for specified vehicles
Built for Rugged Duty Service
Dorman RD products are engineered for severe-duty use where suspension reliability matters. CB90267RD uses a forged/cast control arm design and a steel bushing material to handle demanding front-end loads. The pre-loaded grease boot helps retain lubrication, while the corrosion-resistant coating on the ball joint housing and included hardware supports long-term service in harsh conditions. This part number, CB90267RD, is a practical OE-style replacement for front suspension repair on 2007-2016 Cadillac Escalade, Chevrolet Silverado 1500, Chevrolet Tahoe, and GMC Sierra 1500 platforms.
This part cross-references MOOG Chassis Products CK80669 and Mevotech TTX CTXK80669 for the same application.
Common Problems This Part Can Address
- Front-end clunking or looseness from a worn upper control arm assembly
- Uneven tire wear caused by suspension play
- Steering wander or reduced directional stability
- Ball joint wear on severe-duty trucks and SUVs
- Corrosion-related suspension service issues in harsh environments
Installation Notes and Tips
Compatible With 2015-2016 Cadillac Escalade, front left upper; 2015-2016 Cadillac Escalade ESV, front left upper; 2014-2016 Chevrolet Cheyenne, front left upper; 2014-2016 Chevrolet Silverado 1500, front left upper; 2015-2016 Chevrolet Tahoe, front left upper; 2014-2016 GMC Sierra 1500, front left upper; 2015-2016 GMC Yukon, front left upper; and 2015 GMC Sierra, front left upper. Also compatible with 2007-2014 Cadillac Escalade, Escalade ESV, Chevrolet Suburban 1500, Tahoe, GMC Yukon, and Yukon XL 1500, plus 2007-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Chevrolet Cheyenne, Chevrolet Silverado 1500, GMC Sierra, and GMC Sierra 1500, front left upper.
Verify the vehicle’s suspension configuration and position before installation. Because the ball joint is pre-installed, inspect adjacent wear items such as bushings, fasteners, and alignment-related components during service. A professional alignment is recommended after replacement to restore proper suspension geometry.
Quality Assurance
Dorman RD chassis components are built for severe-duty service applications and are manufactured with corrosion-resistant materials and finishes where applicable. The rugged-duty design focus, pre-greased joint, and included hardware support dependable service on work trucks, SUVs, and emergency vehicles that cannot afford downtime.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Front Left Upper Control Arm
Restore front suspension integrity on heavy-duty GM and Cadillac applications with the Dorman RD control arm and ball joint assembly, part number CB90267RD. This front left upper assembly is built for severe-duty service on vehicles that work hard in towing, hauling, off-road, and emergency-response conditions.
The RD, or Rugged Duty, line is Dorman’s severe-service chassis range. For this application, the ball joint housing uses quenched and tempered steel, and the assembly includes corrosion-resistant finishes on key components to improve durability in demanding environments. CB90267RD is a direct replacement for specified Cadillac Escalade, Chevrolet Silverado 1500, Tahoe, and GMC Sierra 1500 applications.
- Front left upper suspension control arm and ball joint assembly
- Steel control arm construction with black finish
- Pre-greased ball joint for streamlined service
- Threaded ball joint stud with 14 mm thread diameter
- Ball joint installed and bushings included
- Mounting hardware included
- No grease fitting included
- Standard replacement grade for specified vehicles
Built for Rugged Duty Service
Dorman RD products are engineered for severe-duty use where suspension reliability matters. CB90267RD uses a forged/cast control arm design and a steel bushing material to handle demanding front-end loads. The pre-loaded grease boot helps retain lubrication, while the corrosion-resistant coating on the ball joint housing and included hardware supports long-term service in harsh conditions. This part number, CB90267RD, is a practical OE-style replacement for front suspension repair on 2007-2016 Cadillac Escalade, Chevrolet Silverado 1500, Chevrolet Tahoe, and GMC Sierra 1500 platforms.
This part cross-references MOOG Chassis Products CK80669 and Mevotech TTX CTXK80669 for the same application.
Common Problems This Part Can Address
- Front-end clunking or looseness from a worn upper control arm assembly
- Uneven tire wear caused by suspension play
- Steering wander or reduced directional stability
- Ball joint wear on severe-duty trucks and SUVs
- Corrosion-related suspension service issues in harsh environments
Installation Notes and Tips
Compatible With 2015-2016 Cadillac Escalade, front left upper; 2015-2016 Cadillac Escalade ESV, front left upper; 2014-2016 Chevrolet Cheyenne, front left upper; 2014-2016 Chevrolet Silverado 1500, front left upper; 2015-2016 Chevrolet Tahoe, front left upper; 2014-2016 GMC Sierra 1500, front left upper; 2015-2016 GMC Yukon, front left upper; and 2015 GMC Sierra, front left upper. Also compatible with 2007-2014 Cadillac Escalade, Escalade ESV, Chevrolet Suburban 1500, Tahoe, GMC Yukon, and Yukon XL 1500, plus 2007-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Chevrolet Cheyenne, Chevrolet Silverado 1500, GMC Sierra, and GMC Sierra 1500, front left upper.
Verify the vehicle’s suspension configuration and position before installation. Because the ball joint is pre-installed, inspect adjacent wear items such as bushings, fasteners, and alignment-related components during service. A professional alignment is recommended after replacement to restore proper suspension geometry.
Quality Assurance
Dorman RD chassis components are built for severe-duty service applications and are manufactured with corrosion-resistant materials and finishes where applicable. The rugged-duty design focus, pre-greased joint, and included hardware support dependable service on work trucks, SUVs, and emergency vehicles that cannot afford downtime.
