Dorman PA7238RD Steering Pitman Arm
Dorman RD Rugged Duty Pitman Arm for Ram
The Dorman RD - Rugged Duty PA7238RD steering pitman arm is built for heavy-duty steering loads and long service life. It is a direct-fit steering component for select Dodge Ram 2500 and Ram 3500 applications, with fitment for 1994-1999 models listed below.
Key Features
- Steel construction with a coated gray finish for added corrosion resistance
- Hardened ball stud with a polished ball surface for smoother movement
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for internal lubrication
- 32-spline steering shaft connection
- Castle nut, cotter pin, grease fitting, and mounting hardware are listed in the package contents
- Cross-references MOOG Chassis Products K7238 and Mevotech Supreme MK7238 for the same application
Product Details
The PA7238RD is part of Dorman’s RD - Rugged Duty line, a product line focused on steering and chassis components built for higher load absorption and durability. This pitman arm uses a 30.22 mm steering shaft diameter, a 14 mm center link end attachment diameter, and a 1.5 mm center link end attachment pitch. The spline connection and tapered end geometry support proper steering linkage engagement on the listed Dodge Ram 2500 and Ram 3500 applications. The Dorman PA7238RD is a practical replacement for worn or damaged steering linkage hardware on trucks that see demanding use.
Fits 1994-1999 Dodge Ram 2500, N/A, 8,800 Lb. GVW; RD - Rugged Duty. Fits 1994-1999 Dodge Ram 3500, N/A, w/Independent Front Suspension; RD - Rugged Duty. This part number, PA7238RD, is also referenced in aftermarket catalogs for related steering service applications on Dodge Ram 2500 and Ram 3500 trucks.
What It Helps Address
- Excess steering play caused by a worn pitman arm
- Loose or inconsistent steering response at the steering gear
- Clunking or binding in the steering linkage
- Corrosion-related wear at the steering arm connection points
- Steering geometry issues from a damaged or fatigued arm
Installation Notes
Verify spline count, steering shaft diameter, and center link attachment dimensions before installation. Inspect the steering gear, center link, and related linkage parts for wear before replacing the pitman arm. Proper alignment should be checked after installation to confirm steering wheel centering and correct road feel. Use the listed hardware and fasteners according to the vehicle service procedure.
Quality Assurance
Dorman RD - Rugged Duty components are engineered for demanding steering service with corrosion-resistant finishes and serviceable design features. The PA7238RD is built to meet the fitment and dimensional requirements shown for the listed Dodge Ram applications.
Original: $95.03
-65%$95.03
$33.26Dorman PA7238RD Steering Pitman Arm
Dorman RD Rugged Duty Pitman Arm for Ram
The Dorman RD - Rugged Duty PA7238RD steering pitman arm is built for heavy-duty steering loads and long service life. It is a direct-fit steering component for select Dodge Ram 2500 and Ram 3500 applications, with fitment for 1994-1999 models listed below.
Key Features
- Steel construction with a coated gray finish for added corrosion resistance
- Hardened ball stud with a polished ball surface for smoother movement
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for internal lubrication
- 32-spline steering shaft connection
- Castle nut, cotter pin, grease fitting, and mounting hardware are listed in the package contents
- Cross-references MOOG Chassis Products K7238 and Mevotech Supreme MK7238 for the same application
Product Details
The PA7238RD is part of Dorman’s RD - Rugged Duty line, a product line focused on steering and chassis components built for higher load absorption and durability. This pitman arm uses a 30.22 mm steering shaft diameter, a 14 mm center link end attachment diameter, and a 1.5 mm center link end attachment pitch. The spline connection and tapered end geometry support proper steering linkage engagement on the listed Dodge Ram 2500 and Ram 3500 applications. The Dorman PA7238RD is a practical replacement for worn or damaged steering linkage hardware on trucks that see demanding use.
Fits 1994-1999 Dodge Ram 2500, N/A, 8,800 Lb. GVW; RD - Rugged Duty. Fits 1994-1999 Dodge Ram 3500, N/A, w/Independent Front Suspension; RD - Rugged Duty. This part number, PA7238RD, is also referenced in aftermarket catalogs for related steering service applications on Dodge Ram 2500 and Ram 3500 trucks.
What It Helps Address
- Excess steering play caused by a worn pitman arm
- Loose or inconsistent steering response at the steering gear
- Clunking or binding in the steering linkage
- Corrosion-related wear at the steering arm connection points
- Steering geometry issues from a damaged or fatigued arm
Installation Notes
Verify spline count, steering shaft diameter, and center link attachment dimensions before installation. Inspect the steering gear, center link, and related linkage parts for wear before replacing the pitman arm. Proper alignment should be checked after installation to confirm steering wheel centering and correct road feel. Use the listed hardware and fasteners according to the vehicle service procedure.
Quality Assurance
Dorman RD - Rugged Duty components are engineered for demanding steering service with corrosion-resistant finishes and serviceable design features. The PA7238RD is built to meet the fitment and dimensional requirements shown for the listed Dodge Ram applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Rugged Duty Pitman Arm for Ram
The Dorman RD - Rugged Duty PA7238RD steering pitman arm is built for heavy-duty steering loads and long service life. It is a direct-fit steering component for select Dodge Ram 2500 and Ram 3500 applications, with fitment for 1994-1999 models listed below.
Key Features
- Steel construction with a coated gray finish for added corrosion resistance
- Hardened ball stud with a polished ball surface for smoother movement
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for internal lubrication
- 32-spline steering shaft connection
- Castle nut, cotter pin, grease fitting, and mounting hardware are listed in the package contents
- Cross-references MOOG Chassis Products K7238 and Mevotech Supreme MK7238 for the same application
Product Details
The PA7238RD is part of Dorman’s RD - Rugged Duty line, a product line focused on steering and chassis components built for higher load absorption and durability. This pitman arm uses a 30.22 mm steering shaft diameter, a 14 mm center link end attachment diameter, and a 1.5 mm center link end attachment pitch. The spline connection and tapered end geometry support proper steering linkage engagement on the listed Dodge Ram 2500 and Ram 3500 applications. The Dorman PA7238RD is a practical replacement for worn or damaged steering linkage hardware on trucks that see demanding use.
Fits 1994-1999 Dodge Ram 2500, N/A, 8,800 Lb. GVW; RD - Rugged Duty. Fits 1994-1999 Dodge Ram 3500, N/A, w/Independent Front Suspension; RD - Rugged Duty. This part number, PA7238RD, is also referenced in aftermarket catalogs for related steering service applications on Dodge Ram 2500 and Ram 3500 trucks.
What It Helps Address
- Excess steering play caused by a worn pitman arm
- Loose or inconsistent steering response at the steering gear
- Clunking or binding in the steering linkage
- Corrosion-related wear at the steering arm connection points
- Steering geometry issues from a damaged or fatigued arm
Installation Notes
Verify spline count, steering shaft diameter, and center link attachment dimensions before installation. Inspect the steering gear, center link, and related linkage parts for wear before replacing the pitman arm. Proper alignment should be checked after installation to confirm steering wheel centering and correct road feel. Use the listed hardware and fasteners according to the vehicle service procedure.
Quality Assurance
Dorman RD - Rugged Duty components are engineered for demanding steering service with corrosion-resistant finishes and serviceable design features. The PA7238RD is built to meet the fitment and dimensional requirements shown for the listed Dodge Ram applications.
