Dorman SK7298RD Suspension Stabilizer Bar Link Kit - Front
Dorman RD Rugged Duty Stabilizer Link
Dorman RD Rugged Duty SK7298RD is a front suspension stabilizer bar link kit built for demanding service and high-load operation. It uses a hardened ball stud with a polished ball surface, a serviceable integrated bearing, I.C.E. synthetic grease, and corrosion-resistant construction for long-term durability.
The RD - Rugged Duty line focuses on stronger suspension service parts for vehicles that see heavier use, including Dodge Ram 1500 Van, Dodge Dakota, and Toyota T100 front-end applications. If you are replacing a worn sway bar link on a classic Ford Mustang or Mercury Cougar, SK7298RD is built around the same performance-minded hardware approach.
Key Features
- Part number SK7298RD from Dorman RD - Rugged Duty
- Front suspension stabilizer bar link kit
- Hardened ball stud with polished ball for smoother articulation
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for internal lubrication
- Premium corrosion resistance for harsh undercar environments
- Male threaded ends for direct suspension linkage service
- Greaseable design with grease fittings included
- Dust boot included to help protect the joint area
- Performance-grade construction with metal bearing material and thermoplastic bushing material
Detailed Description
Dorman SK7298RD is a front stabilizer bar link designed for vehicles that need dependable sway bar connection and controlled suspension response. The link measures 178 mm in length, uses a 30.5 mm bushing outside diameter, and features male threaded ends for the front suspension position. Its rugged-duty construction is aimed at maintaining stable anti-roll bar function while handling repeated load transfer over rough roads and heavy-duty use.
This part cross-references MOOG Chassis Products K7298 and Mevotech Supreme MK7298 for the same application. It is a direct-fit style replacement for a wide range of vehicles, including Fits 1999-2003 Dodge Ram 1500 Van, front; Fits 1987-1996 Dodge Dakota, front; and Fits 1968-1973 Ford Mustang, front. SK7298RD also covers front applications for Dodge B-series vans, Plymouth PB-series vans, Toyota Corona, Mercury Cougar, and Mercury Montego.
What It Helps Fix
- Clunking or knocking from the front suspension over bumps
- Loose or unstable sway bar connection
- Excessive body roll from a worn stabilizer link
- Joint wear caused by corrosion or contaminated grease
- Front-end noise from deteriorated link bearings or bushings
Installation Notes
Install SK7298RD at the front stabilizer bar location only, and verify the vehicle’s original link style, thread size, and mounting geometry before service. Because this link is greaseable, service the joint with appropriate chassis grease during installation and at regular maintenance intervals. Confirm clearance around the dust boot and threaded ends after tightening, especially on older Dodge, Toyota, Ford Mustang, and Mercury Cougar front suspension setups.
Quality Assurance
Dorman RD Rugged Duty parts are built for demanding suspension service with corrosion-resistant materials and serviceable joint construction. SK7298RD is engineered to support durable front stabilizer bar performance across its listed applications, including Dodge Ram 2500 Van, Dodge Ram 3500 Van, and Toyota T100 front fitments.
Original: $22.53
-65%$22.53
$7.89Dorman SK7298RD Suspension Stabilizer Bar Link Kit - Front
Dorman RD Rugged Duty Stabilizer Link
Dorman RD Rugged Duty SK7298RD is a front suspension stabilizer bar link kit built for demanding service and high-load operation. It uses a hardened ball stud with a polished ball surface, a serviceable integrated bearing, I.C.E. synthetic grease, and corrosion-resistant construction for long-term durability.
The RD - Rugged Duty line focuses on stronger suspension service parts for vehicles that see heavier use, including Dodge Ram 1500 Van, Dodge Dakota, and Toyota T100 front-end applications. If you are replacing a worn sway bar link on a classic Ford Mustang or Mercury Cougar, SK7298RD is built around the same performance-minded hardware approach.
Key Features
- Part number SK7298RD from Dorman RD - Rugged Duty
- Front suspension stabilizer bar link kit
- Hardened ball stud with polished ball for smoother articulation
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for internal lubrication
- Premium corrosion resistance for harsh undercar environments
- Male threaded ends for direct suspension linkage service
- Greaseable design with grease fittings included
- Dust boot included to help protect the joint area
- Performance-grade construction with metal bearing material and thermoplastic bushing material
Detailed Description
Dorman SK7298RD is a front stabilizer bar link designed for vehicles that need dependable sway bar connection and controlled suspension response. The link measures 178 mm in length, uses a 30.5 mm bushing outside diameter, and features male threaded ends for the front suspension position. Its rugged-duty construction is aimed at maintaining stable anti-roll bar function while handling repeated load transfer over rough roads and heavy-duty use.
This part cross-references MOOG Chassis Products K7298 and Mevotech Supreme MK7298 for the same application. It is a direct-fit style replacement for a wide range of vehicles, including Fits 1999-2003 Dodge Ram 1500 Van, front; Fits 1987-1996 Dodge Dakota, front; and Fits 1968-1973 Ford Mustang, front. SK7298RD also covers front applications for Dodge B-series vans, Plymouth PB-series vans, Toyota Corona, Mercury Cougar, and Mercury Montego.
What It Helps Fix
- Clunking or knocking from the front suspension over bumps
- Loose or unstable sway bar connection
- Excessive body roll from a worn stabilizer link
- Joint wear caused by corrosion or contaminated grease
- Front-end noise from deteriorated link bearings or bushings
Installation Notes
Install SK7298RD at the front stabilizer bar location only, and verify the vehicle’s original link style, thread size, and mounting geometry before service. Because this link is greaseable, service the joint with appropriate chassis grease during installation and at regular maintenance intervals. Confirm clearance around the dust boot and threaded ends after tightening, especially on older Dodge, Toyota, Ford Mustang, and Mercury Cougar front suspension setups.
Quality Assurance
Dorman RD Rugged Duty parts are built for demanding suspension service with corrosion-resistant materials and serviceable joint construction. SK7298RD is engineered to support durable front stabilizer bar performance across its listed applications, including Dodge Ram 2500 Van, Dodge Ram 3500 Van, and Toyota T100 front fitments.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Rugged Duty Stabilizer Link
Dorman RD Rugged Duty SK7298RD is a front suspension stabilizer bar link kit built for demanding service and high-load operation. It uses a hardened ball stud with a polished ball surface, a serviceable integrated bearing, I.C.E. synthetic grease, and corrosion-resistant construction for long-term durability.
The RD - Rugged Duty line focuses on stronger suspension service parts for vehicles that see heavier use, including Dodge Ram 1500 Van, Dodge Dakota, and Toyota T100 front-end applications. If you are replacing a worn sway bar link on a classic Ford Mustang or Mercury Cougar, SK7298RD is built around the same performance-minded hardware approach.
Key Features
- Part number SK7298RD from Dorman RD - Rugged Duty
- Front suspension stabilizer bar link kit
- Hardened ball stud with polished ball for smoother articulation
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for internal lubrication
- Premium corrosion resistance for harsh undercar environments
- Male threaded ends for direct suspension linkage service
- Greaseable design with grease fittings included
- Dust boot included to help protect the joint area
- Performance-grade construction with metal bearing material and thermoplastic bushing material
Detailed Description
Dorman SK7298RD is a front stabilizer bar link designed for vehicles that need dependable sway bar connection and controlled suspension response. The link measures 178 mm in length, uses a 30.5 mm bushing outside diameter, and features male threaded ends for the front suspension position. Its rugged-duty construction is aimed at maintaining stable anti-roll bar function while handling repeated load transfer over rough roads and heavy-duty use.
This part cross-references MOOG Chassis Products K7298 and Mevotech Supreme MK7298 for the same application. It is a direct-fit style replacement for a wide range of vehicles, including Fits 1999-2003 Dodge Ram 1500 Van, front; Fits 1987-1996 Dodge Dakota, front; and Fits 1968-1973 Ford Mustang, front. SK7298RD also covers front applications for Dodge B-series vans, Plymouth PB-series vans, Toyota Corona, Mercury Cougar, and Mercury Montego.
What It Helps Fix
- Clunking or knocking from the front suspension over bumps
- Loose or unstable sway bar connection
- Excessive body roll from a worn stabilizer link
- Joint wear caused by corrosion or contaminated grease
- Front-end noise from deteriorated link bearings or bushings
Installation Notes
Install SK7298RD at the front stabilizer bar location only, and verify the vehicle’s original link style, thread size, and mounting geometry before service. Because this link is greaseable, service the joint with appropriate chassis grease during installation and at regular maintenance intervals. Confirm clearance around the dust boot and threaded ends after tightening, especially on older Dodge, Toyota, Ford Mustang, and Mercury Cougar front suspension setups.
Quality Assurance
Dorman RD Rugged Duty parts are built for demanding suspension service with corrosion-resistant materials and serviceable joint construction. SK7298RD is engineered to support durable front stabilizer bar performance across its listed applications, including Dodge Ram 2500 Van, Dodge Ram 3500 Van, and Toyota T100 front fitments.
