Dorman SK8772RD Suspension Stabilizer Bar Link Kit - Front
Dorman RD SK8772RD Front Stabilizer Bar Link Kit
Dorman RD SK8772RD is a front stabilizer bar link kit built for vehicles that need a stronger suspension connection and more consistent sway bar response. It is a direct-fit style replacement for select Ford, Lincoln, and Expedition/F-150 applications, including Ford F-150 Heritage and Lincoln Blackwood models.
RD Rugged Duty Construction
The RD - Rugged Duty line focuses on durability upgrades for demanding suspension service. This kit uses upgraded thermoplastic bushings, premium protective coatings, and service-friendly design details to support long-term performance in front suspension applications. The Dorman SK8772RD also includes greaseable components, dust boots, washers, bolts, sleeves, locking nuts, and bearings as listed in the product data.
- Fits 1997-2003 Ford F-150, front
- Fits 2004 Ford F-150 Heritage, front
- Fits 1997-2002 Ford Expedition, front
- Fits 1998-2002 Lincoln Navigator, front
- Fits 2002-2003 Lincoln Blackwood, front
- Fits 1997-1999 Ford F-250, front, under 8,500 lb. GVW
Key Features
- Part number SK8772RD for front stabilizer bar link replacement
- Threaded end on one side and bushing end on the other
- Greaseable design with grease fittings included
- Dust boot, washers, bolts, sleeve, and locking nuts included per product data
- Gray bushings with polymer bearing material and rubber/elastomer bushing material
- Standard replacement grade for suspension service
- Length: 7 in.; bolt length: 7 in.; sleeve length: 1.375 in.
- Bushing outside diameter: 1.2 in.; bushing inside diameter: 0.52 in.
Detailed Description
Dorman SK8772RD is engineered as a front sway bar link solution for trucks and SUVs that need stable suspension articulation and reliable anti-roll bar connection. The rugged duty design is suited to the Ford F-150, Ford Expedition, Lincoln Navigator, Lincoln Blackwood, and Ford F-250 under 8,500 lb. GVW applications listed above. If you are searching for a front sway bar link kit for a 1997-2003 Ford F-150 or a 1998-2002 Lincoln Navigator, this part number provides the fitment and hardware details needed for a proper replacement.
This part cross-references MOOG Chassis Products K700536 and QuickSteer K8772 for the same application.
What It Helps Address
- Clunking or looseness from worn front stabilizer bar links
- Excess body roll caused by degraded sway bar connection points
- Suspension noise from cracked bushings or worn bearings
- Reduced steering stability during cornering and lane changes
- Corrosion-related service issues on older front suspension hardware
Installation Notes and Tips
Verify vehicle year, model, and front suspension configuration before installation. This Dorman RD SK8772RD uses a threaded end and a bushing end, so confirm the mounting points match the original layout on your Ford F-150, Ford Expedition, Lincoln Navigator, or Lincoln Blackwood. Because the kit is greaseable, service the fittings during installation and after alignment checks as needed. Always inspect adjacent sway bar bushings, control arm bushings, and mounting points for wear before completing the repair.
Quality Assurance
Dorman RD parts are built for demanding suspension service with upgraded materials and protective finishes intended to support durability in real-world use. The SK8772RD is a standard replacement suspension stabilizer bar link kit with application-specific fitment for the listed Ford and Lincoln vehicles.
Original: $30.30
-65%$30.30
$10.61Dorman SK8772RD Suspension Stabilizer Bar Link Kit - Front
Dorman RD SK8772RD Front Stabilizer Bar Link Kit
Dorman RD SK8772RD is a front stabilizer bar link kit built for vehicles that need a stronger suspension connection and more consistent sway bar response. It is a direct-fit style replacement for select Ford, Lincoln, and Expedition/F-150 applications, including Ford F-150 Heritage and Lincoln Blackwood models.
RD Rugged Duty Construction
The RD - Rugged Duty line focuses on durability upgrades for demanding suspension service. This kit uses upgraded thermoplastic bushings, premium protective coatings, and service-friendly design details to support long-term performance in front suspension applications. The Dorman SK8772RD also includes greaseable components, dust boots, washers, bolts, sleeves, locking nuts, and bearings as listed in the product data.
- Fits 1997-2003 Ford F-150, front
- Fits 2004 Ford F-150 Heritage, front
- Fits 1997-2002 Ford Expedition, front
- Fits 1998-2002 Lincoln Navigator, front
- Fits 2002-2003 Lincoln Blackwood, front
- Fits 1997-1999 Ford F-250, front, under 8,500 lb. GVW
Key Features
- Part number SK8772RD for front stabilizer bar link replacement
- Threaded end on one side and bushing end on the other
- Greaseable design with grease fittings included
- Dust boot, washers, bolts, sleeve, and locking nuts included per product data
- Gray bushings with polymer bearing material and rubber/elastomer bushing material
- Standard replacement grade for suspension service
- Length: 7 in.; bolt length: 7 in.; sleeve length: 1.375 in.
- Bushing outside diameter: 1.2 in.; bushing inside diameter: 0.52 in.
Detailed Description
Dorman SK8772RD is engineered as a front sway bar link solution for trucks and SUVs that need stable suspension articulation and reliable anti-roll bar connection. The rugged duty design is suited to the Ford F-150, Ford Expedition, Lincoln Navigator, Lincoln Blackwood, and Ford F-250 under 8,500 lb. GVW applications listed above. If you are searching for a front sway bar link kit for a 1997-2003 Ford F-150 or a 1998-2002 Lincoln Navigator, this part number provides the fitment and hardware details needed for a proper replacement.
This part cross-references MOOG Chassis Products K700536 and QuickSteer K8772 for the same application.
What It Helps Address
- Clunking or looseness from worn front stabilizer bar links
- Excess body roll caused by degraded sway bar connection points
- Suspension noise from cracked bushings or worn bearings
- Reduced steering stability during cornering and lane changes
- Corrosion-related service issues on older front suspension hardware
Installation Notes and Tips
Verify vehicle year, model, and front suspension configuration before installation. This Dorman RD SK8772RD uses a threaded end and a bushing end, so confirm the mounting points match the original layout on your Ford F-150, Ford Expedition, Lincoln Navigator, or Lincoln Blackwood. Because the kit is greaseable, service the fittings during installation and after alignment checks as needed. Always inspect adjacent sway bar bushings, control arm bushings, and mounting points for wear before completing the repair.
Quality Assurance
Dorman RD parts are built for demanding suspension service with upgraded materials and protective finishes intended to support durability in real-world use. The SK8772RD is a standard replacement suspension stabilizer bar link kit with application-specific fitment for the listed Ford and Lincoln vehicles.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD SK8772RD Front Stabilizer Bar Link Kit
Dorman RD SK8772RD is a front stabilizer bar link kit built for vehicles that need a stronger suspension connection and more consistent sway bar response. It is a direct-fit style replacement for select Ford, Lincoln, and Expedition/F-150 applications, including Ford F-150 Heritage and Lincoln Blackwood models.
RD Rugged Duty Construction
The RD - Rugged Duty line focuses on durability upgrades for demanding suspension service. This kit uses upgraded thermoplastic bushings, premium protective coatings, and service-friendly design details to support long-term performance in front suspension applications. The Dorman SK8772RD also includes greaseable components, dust boots, washers, bolts, sleeves, locking nuts, and bearings as listed in the product data.
- Fits 1997-2003 Ford F-150, front
- Fits 2004 Ford F-150 Heritage, front
- Fits 1997-2002 Ford Expedition, front
- Fits 1998-2002 Lincoln Navigator, front
- Fits 2002-2003 Lincoln Blackwood, front
- Fits 1997-1999 Ford F-250, front, under 8,500 lb. GVW
Key Features
- Part number SK8772RD for front stabilizer bar link replacement
- Threaded end on one side and bushing end on the other
- Greaseable design with grease fittings included
- Dust boot, washers, bolts, sleeve, and locking nuts included per product data
- Gray bushings with polymer bearing material and rubber/elastomer bushing material
- Standard replacement grade for suspension service
- Length: 7 in.; bolt length: 7 in.; sleeve length: 1.375 in.
- Bushing outside diameter: 1.2 in.; bushing inside diameter: 0.52 in.
Detailed Description
Dorman SK8772RD is engineered as a front sway bar link solution for trucks and SUVs that need stable suspension articulation and reliable anti-roll bar connection. The rugged duty design is suited to the Ford F-150, Ford Expedition, Lincoln Navigator, Lincoln Blackwood, and Ford F-250 under 8,500 lb. GVW applications listed above. If you are searching for a front sway bar link kit for a 1997-2003 Ford F-150 or a 1998-2002 Lincoln Navigator, this part number provides the fitment and hardware details needed for a proper replacement.
This part cross-references MOOG Chassis Products K700536 and QuickSteer K8772 for the same application.
What It Helps Address
- Clunking or looseness from worn front stabilizer bar links
- Excess body roll caused by degraded sway bar connection points
- Suspension noise from cracked bushings or worn bearings
- Reduced steering stability during cornering and lane changes
- Corrosion-related service issues on older front suspension hardware
Installation Notes and Tips
Verify vehicle year, model, and front suspension configuration before installation. This Dorman RD SK8772RD uses a threaded end and a bushing end, so confirm the mounting points match the original layout on your Ford F-150, Ford Expedition, Lincoln Navigator, or Lincoln Blackwood. Because the kit is greaseable, service the fittings during installation and after alignment checks as needed. Always inspect adjacent sway bar bushings, control arm bushings, and mounting points for wear before completing the repair.
Quality Assurance
Dorman RD parts are built for demanding suspension service with upgraded materials and protective finishes intended to support durability in real-world use. The SK8772RD is a standard replacement suspension stabilizer bar link kit with application-specific fitment for the listed Ford and Lincoln vehicles.
