Dorman SL82345RD Suspension Stabilizer Bar Link Kit - Front
Dorman RD Stabilizer Bar Link Kit for Ram
Dorman RD SL82345RD is a front stabilizer bar link kit built for severe-duty service on Ram trucks. It is engineered for demanding use where suspension durability matters, including towing, hauling, off-road work, and emergency-response duty.
The RD, or Rugged Duty, product line is Dorman’s heavy-service chassis range for vehicles that see repeated stress and limited downtime. This application-focused stabilizer link is a direct replacement for specified Dodge Ram 1500, Ram 2500, and Ram 3500 front suspension setups.
- Front stabilizer bar link kit for specified Ram and Dodge Ram applications
- Designed for severe-duty service conditions
- Coated finish for added corrosion resistance
- Greaseable design with grease fitting included
- Metal bearing material with rubber bushing material
- Gray bushings with dust boot included
- Male threaded ends for secure attachment
- Locking nuts included
- Performance grade construction
- Part number: SL82345RD
Built for Rugged Duty Service
Dorman RD chassis components are made for vehicles that work hard every day. This stabilizer bar link kit uses a durable, service-oriented design to help maintain front suspension control under heavy loads and repeated road shock. The coated exterior, greaseable construction, and dust boot support long-term service in harsh operating environments.
Compatible With 2002-2010 Dodge Ram 1500, front; 2009-2010 Dodge Ram 2500, front; 2009-2010 Dodge Ram 3500, front; 2011-2012 Ram 1500, front; 2011-2012 Ram 3500, front; and 2011-2013 Ram 2500, front. This part cross-references MOOG Chassis Products (e.g., K7400, K750157) for the same application.
Common Problems This Part Can Address
- Front-end clunking or rattling from a worn stabilizer link
- Excessive sway-bar movement during cornering or load transfer
- Loose or degraded link hardware on high-mileage trucks
- Suspension noise caused by worn bushings or bearings
- Reduced stability after heavy towing, hauling, or off-road use
Installation Notes and Tips
Verify front suspension fitment by year, make, and model before installation. This link kit uses male threaded ends and locking nuts, so inspect the mating sway bar and suspension mounting points for wear, damage, or corrosion before assembly. Because the part is greaseable, service the fitting after installation and during routine chassis maintenance.
For best results, replace worn stabilizer bar links in pairs when the opposite side shows similar wear, and confirm proper torque using the vehicle service specification.
Quality Assurance
Dorman RD parts are engineered for severe-duty chassis service and are intended to replace failed original equipment on specified vehicles. SL82345RD is built for demanding front suspension use on Ram 1500, Ram 2500, and Ram 3500 applications where dependable service life is important.
Original: $62.55
-65%$62.55
$21.89Dorman SL82345RD Suspension Stabilizer Bar Link Kit - Front
Dorman RD Stabilizer Bar Link Kit for Ram
Dorman RD SL82345RD is a front stabilizer bar link kit built for severe-duty service on Ram trucks. It is engineered for demanding use where suspension durability matters, including towing, hauling, off-road work, and emergency-response duty.
The RD, or Rugged Duty, product line is Dorman’s heavy-service chassis range for vehicles that see repeated stress and limited downtime. This application-focused stabilizer link is a direct replacement for specified Dodge Ram 1500, Ram 2500, and Ram 3500 front suspension setups.
- Front stabilizer bar link kit for specified Ram and Dodge Ram applications
- Designed for severe-duty service conditions
- Coated finish for added corrosion resistance
- Greaseable design with grease fitting included
- Metal bearing material with rubber bushing material
- Gray bushings with dust boot included
- Male threaded ends for secure attachment
- Locking nuts included
- Performance grade construction
- Part number: SL82345RD
Built for Rugged Duty Service
Dorman RD chassis components are made for vehicles that work hard every day. This stabilizer bar link kit uses a durable, service-oriented design to help maintain front suspension control under heavy loads and repeated road shock. The coated exterior, greaseable construction, and dust boot support long-term service in harsh operating environments.
Compatible With 2002-2010 Dodge Ram 1500, front; 2009-2010 Dodge Ram 2500, front; 2009-2010 Dodge Ram 3500, front; 2011-2012 Ram 1500, front; 2011-2012 Ram 3500, front; and 2011-2013 Ram 2500, front. This part cross-references MOOG Chassis Products (e.g., K7400, K750157) for the same application.
Common Problems This Part Can Address
- Front-end clunking or rattling from a worn stabilizer link
- Excessive sway-bar movement during cornering or load transfer
- Loose or degraded link hardware on high-mileage trucks
- Suspension noise caused by worn bushings or bearings
- Reduced stability after heavy towing, hauling, or off-road use
Installation Notes and Tips
Verify front suspension fitment by year, make, and model before installation. This link kit uses male threaded ends and locking nuts, so inspect the mating sway bar and suspension mounting points for wear, damage, or corrosion before assembly. Because the part is greaseable, service the fitting after installation and during routine chassis maintenance.
For best results, replace worn stabilizer bar links in pairs when the opposite side shows similar wear, and confirm proper torque using the vehicle service specification.
Quality Assurance
Dorman RD parts are engineered for severe-duty chassis service and are intended to replace failed original equipment on specified vehicles. SL82345RD is built for demanding front suspension use on Ram 1500, Ram 2500, and Ram 3500 applications where dependable service life is important.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Stabilizer Bar Link Kit for Ram
Dorman RD SL82345RD is a front stabilizer bar link kit built for severe-duty service on Ram trucks. It is engineered for demanding use where suspension durability matters, including towing, hauling, off-road work, and emergency-response duty.
The RD, or Rugged Duty, product line is Dorman’s heavy-service chassis range for vehicles that see repeated stress and limited downtime. This application-focused stabilizer link is a direct replacement for specified Dodge Ram 1500, Ram 2500, and Ram 3500 front suspension setups.
- Front stabilizer bar link kit for specified Ram and Dodge Ram applications
- Designed for severe-duty service conditions
- Coated finish for added corrosion resistance
- Greaseable design with grease fitting included
- Metal bearing material with rubber bushing material
- Gray bushings with dust boot included
- Male threaded ends for secure attachment
- Locking nuts included
- Performance grade construction
- Part number: SL82345RD
Built for Rugged Duty Service
Dorman RD chassis components are made for vehicles that work hard every day. This stabilizer bar link kit uses a durable, service-oriented design to help maintain front suspension control under heavy loads and repeated road shock. The coated exterior, greaseable construction, and dust boot support long-term service in harsh operating environments.
Compatible With 2002-2010 Dodge Ram 1500, front; 2009-2010 Dodge Ram 2500, front; 2009-2010 Dodge Ram 3500, front; 2011-2012 Ram 1500, front; 2011-2012 Ram 3500, front; and 2011-2013 Ram 2500, front. This part cross-references MOOG Chassis Products (e.g., K7400, K750157) for the same application.
Common Problems This Part Can Address
- Front-end clunking or rattling from a worn stabilizer link
- Excessive sway-bar movement during cornering or load transfer
- Loose or degraded link hardware on high-mileage trucks
- Suspension noise caused by worn bushings or bearings
- Reduced stability after heavy towing, hauling, or off-road use
Installation Notes and Tips
Verify front suspension fitment by year, make, and model before installation. This link kit uses male threaded ends and locking nuts, so inspect the mating sway bar and suspension mounting points for wear, damage, or corrosion before assembly. Because the part is greaseable, service the fitting after installation and during routine chassis maintenance.
For best results, replace worn stabilizer bar links in pairs when the opposite side shows similar wear, and confirm proper torque using the vehicle service specification.
Quality Assurance
Dorman RD parts are engineered for severe-duty chassis service and are intended to replace failed original equipment on specified vehicles. SL82345RD is built for demanding front suspension use on Ram 1500, Ram 2500, and Ram 3500 applications where dependable service life is important.
