Dorman SL92005RD Suspension Stabilizer Bar Link Kit - Front or Rear
Dorman RD Stabilizer Bar Link Kit for Heavy-Duty Use
The Dorman RD SL92005RD stabilizer bar link kit is built for severe-duty service on vehicles that work harder than standard commuter applications. It is engineered for durability under towing, hauling, off-road use, and emergency-response demands, with a greaseable design and polymer bearing material for long-term service.
Compatible With select Jeep Compass, Jeep Patriot, Chevrolet Impala, and other listed applications, this RD - Rugged Duty part is a direct replacement for failed original equipment on specified front and rear suspension positions. The SL92005RD is also cross-referenced to MOOG Chassis Products K700530 for the same application.
Key Features
- RD - Rugged Duty line for severe-duty suspension service
- Standard replacement stabilizer bar link kit for specified vehicles
- Greaseable design with grease fittings included
- Polymer bearing material and rubber bushing material
- Threaded end and bushing end configuration
- Dust boot, washers, bolts, sleeve, and locking nuts included
- Gray bushing color
- Length: 4 in.; bolt thread diameter: 1 in.
Product Details
Dorman engineered the RD line for vehicles that face repeated stress from heavy hauling, towing, off-road work, and other demanding conditions. This stabilizer bar link kit uses a greaseable construction to support serviceability, while the polymer bearing material and rubber bushing design are selected for durability in hard-use suspension systems. The SL92005RD is a direct-fit replacement for listed front and rear applications, including 2010-2017 Jeep Patriot, rear, 2010-2016 Jeep Compass, rear, and 2000-2013 Chevrolet Impala, front.
Additional fitment includes 2014-2016 Chevrolet Impala Limited, front, 2010-2012 Dodge Caliber, rear, 2008-2009 Buick Allure, front, 2008-2009 Buick LaCrosse, front, and 2006-2008 Pontiac Grand Prix, front. This part number, SL92005RD, also applies to older listed vehicles such as Pontiac Grand Prix, Buick Regal, Oldsmobile Intrigue, and Cadillac Eldorado applications.
What It Helps Address
- Clunking or looseness from a worn stabilizer bar link
- Excess body roll caused by degraded sway bar linkage
- Suspension noise over bumps and uneven pavement
- Premature wear from severe-duty driving conditions
- Failed OE link hardware on listed front or rear positions
Installation Notes and Tips
Verify year, make, model, and suspension position before ordering. This part is listed for both front and rear applications depending on vehicle, so match the exact fitment row for your vehicle. The link is not adjustable, and the design uses threaded and bushing-end interfaces. Confirm clearance around the stabilizer bar and inspect adjacent suspension components before installation.
Quality Assurance
Dorman RD chassis products are developed for severe-duty service applications where durability matters. The SL92005RD is designed as a rugged-duty replacement for specified vehicles and is backed by Dorman’s product engineering standards for hard-use suspension service.
Original: $30.30
-65%$30.30
$10.61Dorman SL92005RD Suspension Stabilizer Bar Link Kit - Front or Rear
Dorman RD Stabilizer Bar Link Kit for Heavy-Duty Use
The Dorman RD SL92005RD stabilizer bar link kit is built for severe-duty service on vehicles that work harder than standard commuter applications. It is engineered for durability under towing, hauling, off-road use, and emergency-response demands, with a greaseable design and polymer bearing material for long-term service.
Compatible With select Jeep Compass, Jeep Patriot, Chevrolet Impala, and other listed applications, this RD - Rugged Duty part is a direct replacement for failed original equipment on specified front and rear suspension positions. The SL92005RD is also cross-referenced to MOOG Chassis Products K700530 for the same application.
Key Features
- RD - Rugged Duty line for severe-duty suspension service
- Standard replacement stabilizer bar link kit for specified vehicles
- Greaseable design with grease fittings included
- Polymer bearing material and rubber bushing material
- Threaded end and bushing end configuration
- Dust boot, washers, bolts, sleeve, and locking nuts included
- Gray bushing color
- Length: 4 in.; bolt thread diameter: 1 in.
Product Details
Dorman engineered the RD line for vehicles that face repeated stress from heavy hauling, towing, off-road work, and other demanding conditions. This stabilizer bar link kit uses a greaseable construction to support serviceability, while the polymer bearing material and rubber bushing design are selected for durability in hard-use suspension systems. The SL92005RD is a direct-fit replacement for listed front and rear applications, including 2010-2017 Jeep Patriot, rear, 2010-2016 Jeep Compass, rear, and 2000-2013 Chevrolet Impala, front.
Additional fitment includes 2014-2016 Chevrolet Impala Limited, front, 2010-2012 Dodge Caliber, rear, 2008-2009 Buick Allure, front, 2008-2009 Buick LaCrosse, front, and 2006-2008 Pontiac Grand Prix, front. This part number, SL92005RD, also applies to older listed vehicles such as Pontiac Grand Prix, Buick Regal, Oldsmobile Intrigue, and Cadillac Eldorado applications.
What It Helps Address
- Clunking or looseness from a worn stabilizer bar link
- Excess body roll caused by degraded sway bar linkage
- Suspension noise over bumps and uneven pavement
- Premature wear from severe-duty driving conditions
- Failed OE link hardware on listed front or rear positions
Installation Notes and Tips
Verify year, make, model, and suspension position before ordering. This part is listed for both front and rear applications depending on vehicle, so match the exact fitment row for your vehicle. The link is not adjustable, and the design uses threaded and bushing-end interfaces. Confirm clearance around the stabilizer bar and inspect adjacent suspension components before installation.
Quality Assurance
Dorman RD chassis products are developed for severe-duty service applications where durability matters. The SL92005RD is designed as a rugged-duty replacement for specified vehicles and is backed by Dorman’s product engineering standards for hard-use suspension service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Stabilizer Bar Link Kit for Heavy-Duty Use
The Dorman RD SL92005RD stabilizer bar link kit is built for severe-duty service on vehicles that work harder than standard commuter applications. It is engineered for durability under towing, hauling, off-road use, and emergency-response demands, with a greaseable design and polymer bearing material for long-term service.
Compatible With select Jeep Compass, Jeep Patriot, Chevrolet Impala, and other listed applications, this RD - Rugged Duty part is a direct replacement for failed original equipment on specified front and rear suspension positions. The SL92005RD is also cross-referenced to MOOG Chassis Products K700530 for the same application.
Key Features
- RD - Rugged Duty line for severe-duty suspension service
- Standard replacement stabilizer bar link kit for specified vehicles
- Greaseable design with grease fittings included
- Polymer bearing material and rubber bushing material
- Threaded end and bushing end configuration
- Dust boot, washers, bolts, sleeve, and locking nuts included
- Gray bushing color
- Length: 4 in.; bolt thread diameter: 1 in.
Product Details
Dorman engineered the RD line for vehicles that face repeated stress from heavy hauling, towing, off-road work, and other demanding conditions. This stabilizer bar link kit uses a greaseable construction to support serviceability, while the polymer bearing material and rubber bushing design are selected for durability in hard-use suspension systems. The SL92005RD is a direct-fit replacement for listed front and rear applications, including 2010-2017 Jeep Patriot, rear, 2010-2016 Jeep Compass, rear, and 2000-2013 Chevrolet Impala, front.
Additional fitment includes 2014-2016 Chevrolet Impala Limited, front, 2010-2012 Dodge Caliber, rear, 2008-2009 Buick Allure, front, 2008-2009 Buick LaCrosse, front, and 2006-2008 Pontiac Grand Prix, front. This part number, SL92005RD, also applies to older listed vehicles such as Pontiac Grand Prix, Buick Regal, Oldsmobile Intrigue, and Cadillac Eldorado applications.
What It Helps Address
- Clunking or looseness from a worn stabilizer bar link
- Excess body roll caused by degraded sway bar linkage
- Suspension noise over bumps and uneven pavement
- Premature wear from severe-duty driving conditions
- Failed OE link hardware on listed front or rear positions
Installation Notes and Tips
Verify year, make, model, and suspension position before ordering. This part is listed for both front and rear applications depending on vehicle, so match the exact fitment row for your vehicle. The link is not adjustable, and the design uses threaded and bushing-end interfaces. Confirm clearance around the stabilizer bar and inspect adjacent suspension components before installation.
Quality Assurance
Dorman RD chassis products are developed for severe-duty service applications where durability matters. The SL92005RD is designed as a rugged-duty replacement for specified vehicles and is backed by Dorman’s product engineering standards for hard-use suspension service.
