Dorman T3096RD Steering Tie Rod End - At Pitman Arm, Front Left Outer or Left Outer (Steering Arm To Steering Arm)
Dorman T3096RD Steering Tie Rod End - At Pitman Arm, Front Left Outer or Left Outer (Steering Arm To Steering Arm)
Dorman RD - Rugged Duty Tie Rod End T3096RD
The Dorman RD - Rugged Duty tie rod end T3096RD is built for Jeep steering systems that need stronger load handling and dependable service life. It combines a hardened ball stud, a highly polished ball surface, a serviceable integrated bearing, and I.C.E. synthetic grease for smoother operation and corrosion resistance.
For Jeep TJ, Wrangler, Cherokee, Grand Cherokee, Grand Wagoneer, and Comanche applications, this steering tie rod end supports precise steering response at the pitman arm and outer steering positions. The Dorman T3096RD is a practical replacement for worn steering linkage components on vehicles used on-road or in demanding conditions.
Key Features
- Hardened ball stud with a polished ball for durable steering articulation
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for reduced friction and consistent movement
- Coated steel housing for added corrosion resistance
- Grease fitting included for service access
- Mounting hardware included
- Gray finish
Product Details
This steering tie rod end is part of Dorman’s RD - Rugged Duty line, which focuses on heavier-duty steering and suspension service where durability matters. The T3096RD is engineered for Jeep steering applications that include 1991-2001 Jeep Cherokee at the pitman arm, 1997-2006 Jeep TJ and Wrangler at the pitman arm, and select Grand Cherokee, Grand Wagoneer, and Comanche fitments. Cross-reference part numbers include Delphi TA2033 and MOOG Chassis Products ES3096L for the same application.
Use the Dorman T3096RD when replacing a worn Jeep tie rod end that has looseness, play, or corrosion in the steering linkage. It is a direct-fit steering component for the listed Jeep TJ, Wrangler, and Cherokee applications, with fitment also shown for Grand Cherokee, Grand Wagoneer, and Comanche positions specified in the vehicle table.
What It Helps Fix
- Steering wheel play caused by a worn tie rod end
- Clunking or looseness in the steering linkage
- Uneven steering response at the pitman arm or outer steering arm
- Corrosion-related binding in the steering joint
- Grease loss and accelerated joint wear
Installation Notes
Verify the exact year, model, and steering position before installation. This part fits at the pitman arm on 1991-2001 Jeep Cherokee, 1997-2006 Jeep TJ, 1997-2006 Jeep Wrangler, 1993-1994 Jeep Grand Cherokee, 1996 Jeep Grand Cherokee, 1998 Jeep Grand Cherokee, 1993 Jeep Grand Wagoneer, and 1991-1992 Jeep Comanche. It also fits 1997 Jeep Grand Cherokee, left outer (steering arm to steering arm), and 1995 Jeep Grand Cherokee, front left outer. After installation, inspect alignment and steering linkage condition.
Quality Assurance
Dorman RD - Rugged Duty components are built for demanding steering service with corrosion-resistant construction and serviceable design features. The T3096RD uses a hardened ball stud, polished ball, integrated bearing, and synthetic grease to support long-term steering performance.
Original: $41.71
-65%$41.71
$14.60Dorman T3096RD Steering Tie Rod End - At Pitman Arm, Front Left Outer or Left Outer (Steering Arm To Steering Arm)
Dorman RD - Rugged Duty Tie Rod End T3096RD
The Dorman RD - Rugged Duty tie rod end T3096RD is built for Jeep steering systems that need stronger load handling and dependable service life. It combines a hardened ball stud, a highly polished ball surface, a serviceable integrated bearing, and I.C.E. synthetic grease for smoother operation and corrosion resistance.
For Jeep TJ, Wrangler, Cherokee, Grand Cherokee, Grand Wagoneer, and Comanche applications, this steering tie rod end supports precise steering response at the pitman arm and outer steering positions. The Dorman T3096RD is a practical replacement for worn steering linkage components on vehicles used on-road or in demanding conditions.
Key Features
- Hardened ball stud with a polished ball for durable steering articulation
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for reduced friction and consistent movement
- Coated steel housing for added corrosion resistance
- Grease fitting included for service access
- Mounting hardware included
- Gray finish
Product Details
This steering tie rod end is part of Dorman’s RD - Rugged Duty line, which focuses on heavier-duty steering and suspension service where durability matters. The T3096RD is engineered for Jeep steering applications that include 1991-2001 Jeep Cherokee at the pitman arm, 1997-2006 Jeep TJ and Wrangler at the pitman arm, and select Grand Cherokee, Grand Wagoneer, and Comanche fitments. Cross-reference part numbers include Delphi TA2033 and MOOG Chassis Products ES3096L for the same application.
Use the Dorman T3096RD when replacing a worn Jeep tie rod end that has looseness, play, or corrosion in the steering linkage. It is a direct-fit steering component for the listed Jeep TJ, Wrangler, and Cherokee applications, with fitment also shown for Grand Cherokee, Grand Wagoneer, and Comanche positions specified in the vehicle table.
What It Helps Fix
- Steering wheel play caused by a worn tie rod end
- Clunking or looseness in the steering linkage
- Uneven steering response at the pitman arm or outer steering arm
- Corrosion-related binding in the steering joint
- Grease loss and accelerated joint wear
Installation Notes
Verify the exact year, model, and steering position before installation. This part fits at the pitman arm on 1991-2001 Jeep Cherokee, 1997-2006 Jeep TJ, 1997-2006 Jeep Wrangler, 1993-1994 Jeep Grand Cherokee, 1996 Jeep Grand Cherokee, 1998 Jeep Grand Cherokee, 1993 Jeep Grand Wagoneer, and 1991-1992 Jeep Comanche. It also fits 1997 Jeep Grand Cherokee, left outer (steering arm to steering arm), and 1995 Jeep Grand Cherokee, front left outer. After installation, inspect alignment and steering linkage condition.
Quality Assurance
Dorman RD - Rugged Duty components are built for demanding steering service with corrosion-resistant construction and serviceable design features. The T3096RD uses a hardened ball stud, polished ball, integrated bearing, and synthetic grease to support long-term steering performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD - Rugged Duty Tie Rod End T3096RD
The Dorman RD - Rugged Duty tie rod end T3096RD is built for Jeep steering systems that need stronger load handling and dependable service life. It combines a hardened ball stud, a highly polished ball surface, a serviceable integrated bearing, and I.C.E. synthetic grease for smoother operation and corrosion resistance.
For Jeep TJ, Wrangler, Cherokee, Grand Cherokee, Grand Wagoneer, and Comanche applications, this steering tie rod end supports precise steering response at the pitman arm and outer steering positions. The Dorman T3096RD is a practical replacement for worn steering linkage components on vehicles used on-road or in demanding conditions.
Key Features
- Hardened ball stud with a polished ball for durable steering articulation
- Serviceable integrated bearing for maintenance-friendly operation
- I.C.E. synthetic grease for reduced friction and consistent movement
- Coated steel housing for added corrosion resistance
- Grease fitting included for service access
- Mounting hardware included
- Gray finish
Product Details
This steering tie rod end is part of Dorman’s RD - Rugged Duty line, which focuses on heavier-duty steering and suspension service where durability matters. The T3096RD is engineered for Jeep steering applications that include 1991-2001 Jeep Cherokee at the pitman arm, 1997-2006 Jeep TJ and Wrangler at the pitman arm, and select Grand Cherokee, Grand Wagoneer, and Comanche fitments. Cross-reference part numbers include Delphi TA2033 and MOOG Chassis Products ES3096L for the same application.
Use the Dorman T3096RD when replacing a worn Jeep tie rod end that has looseness, play, or corrosion in the steering linkage. It is a direct-fit steering component for the listed Jeep TJ, Wrangler, and Cherokee applications, with fitment also shown for Grand Cherokee, Grand Wagoneer, and Comanche positions specified in the vehicle table.
What It Helps Fix
- Steering wheel play caused by a worn tie rod end
- Clunking or looseness in the steering linkage
- Uneven steering response at the pitman arm or outer steering arm
- Corrosion-related binding in the steering joint
- Grease loss and accelerated joint wear
Installation Notes
Verify the exact year, model, and steering position before installation. This part fits at the pitman arm on 1991-2001 Jeep Cherokee, 1997-2006 Jeep TJ, 1997-2006 Jeep Wrangler, 1993-1994 Jeep Grand Cherokee, 1996 Jeep Grand Cherokee, 1998 Jeep Grand Cherokee, 1993 Jeep Grand Wagoneer, and 1991-1992 Jeep Comanche. It also fits 1997 Jeep Grand Cherokee, left outer (steering arm to steering arm), and 1995 Jeep Grand Cherokee, front left outer. After installation, inspect alignment and steering linkage condition.
Quality Assurance
Dorman RD - Rugged Duty components are built for demanding steering service with corrosion-resistant construction and serviceable design features. The T3096RD uses a hardened ball stud, polished ball, integrated bearing, and synthetic grease to support long-term steering performance.
