Dorman TI96031RD Steering Tie Rod End - Front Left Inner (To Pitman Arm)
Dorman RD Inner Tie Rod End for Severe Duty
Dorman RD TI96031RD is a front left inner tie rod end built for demanding steering service on select Jeep Wrangler, Jeep Wrangler JK, and Dodge Ram applications. It is engineered for vehicles that see towing, hauling, off-road use, and other high-load conditions where steering precision and durability matter.
The RD, or Rugged Duty, product line is Dorman’s severe-service chassis range. TI96031RD uses a quenched and tempered steel bearing housing with a protective coated finish for added corrosion resistance, and the joint is pre-loaded with premium grease where applicable to help simplify service and maintain lubrication.
Key Features
- Front left inner tie rod end, positioned to the pitman arm
- Quenched and tempered steel housing for severe-duty service
- Coated finish for improved corrosion resistance
- Grease fitting included for serviceability
- Hardware package includes a castle nut, cotter pin, tie rod, and Zerk fitting
- Direct replacement for specified Jeep Wrangler, Jeep Wrangler JK, and Dodge Ram fitments
Detailed Description
TI96031RD is designed for steering systems that need dependable response under load. It cross-references MOOG Chassis Products ES3624 and Mopar 52060049AE for the same application. This part number, TI96031RD, is a practical OE-style replacement for drivers servicing a 2007-2017 Jeep Wrangler front left inner tie rod end, a 2018 Jeep Wrangler JK front left inner tie rod end, or a 2003-2008 Dodge Ram 2500 front left inner tie rod end. It also applies to select 2006-2008 Dodge Ram 1500 and 2003-2008 Dodge Ram 3500 configurations.
As part of Dorman RD Rugged Duty, this steering component is aimed at severe-duty chassis use where corrosion resistance, joint integrity, and consistent steering feel are important. The coated steel construction and serviceable grease fitting support long-term maintenance on work trucks and off-road vehicles.
Common Problems This Part Can Address
- Excessive steering play from a worn inner tie rod end
- Clunking or looseness in the front steering linkage
- Uneven tire wear caused by steering component wear
- Corrosion-related failure in exposed steering hardware
- Steering instability on towing, hauling, or off-road duty cycles
Installation Notes and Tips
Verify the vehicle’s steering configuration before installation and confirm the front left inner position matches the original part. After replacement, inspect related steering and suspension components, then perform a professional alignment to restore correct toe settings. Use the included grease fitting during routine maintenance where applicable to keep the joint properly lubricated.
Quality Assurance
Dorman RD components are built for severe-duty service with corrosion-resistant materials and protective coatings. TI96031RD is manufactured for specified applications on Jeep Wrangler, Jeep Wrangler JK, and Dodge Ram models, and is intended to replace failed original equipment steering parts with a durable service solution.
Original: $42.27
-65%$42.27
$14.79Dorman TI96031RD Steering Tie Rod End - Front Left Inner (To Pitman Arm)
Dorman RD Inner Tie Rod End for Severe Duty
Dorman RD TI96031RD is a front left inner tie rod end built for demanding steering service on select Jeep Wrangler, Jeep Wrangler JK, and Dodge Ram applications. It is engineered for vehicles that see towing, hauling, off-road use, and other high-load conditions where steering precision and durability matter.
The RD, or Rugged Duty, product line is Dorman’s severe-service chassis range. TI96031RD uses a quenched and tempered steel bearing housing with a protective coated finish for added corrosion resistance, and the joint is pre-loaded with premium grease where applicable to help simplify service and maintain lubrication.
Key Features
- Front left inner tie rod end, positioned to the pitman arm
- Quenched and tempered steel housing for severe-duty service
- Coated finish for improved corrosion resistance
- Grease fitting included for serviceability
- Hardware package includes a castle nut, cotter pin, tie rod, and Zerk fitting
- Direct replacement for specified Jeep Wrangler, Jeep Wrangler JK, and Dodge Ram fitments
Detailed Description
TI96031RD is designed for steering systems that need dependable response under load. It cross-references MOOG Chassis Products ES3624 and Mopar 52060049AE for the same application. This part number, TI96031RD, is a practical OE-style replacement for drivers servicing a 2007-2017 Jeep Wrangler front left inner tie rod end, a 2018 Jeep Wrangler JK front left inner tie rod end, or a 2003-2008 Dodge Ram 2500 front left inner tie rod end. It also applies to select 2006-2008 Dodge Ram 1500 and 2003-2008 Dodge Ram 3500 configurations.
As part of Dorman RD Rugged Duty, this steering component is aimed at severe-duty chassis use where corrosion resistance, joint integrity, and consistent steering feel are important. The coated steel construction and serviceable grease fitting support long-term maintenance on work trucks and off-road vehicles.
Common Problems This Part Can Address
- Excessive steering play from a worn inner tie rod end
- Clunking or looseness in the front steering linkage
- Uneven tire wear caused by steering component wear
- Corrosion-related failure in exposed steering hardware
- Steering instability on towing, hauling, or off-road duty cycles
Installation Notes and Tips
Verify the vehicle’s steering configuration before installation and confirm the front left inner position matches the original part. After replacement, inspect related steering and suspension components, then perform a professional alignment to restore correct toe settings. Use the included grease fitting during routine maintenance where applicable to keep the joint properly lubricated.
Quality Assurance
Dorman RD components are built for severe-duty service with corrosion-resistant materials and protective coatings. TI96031RD is manufactured for specified applications on Jeep Wrangler, Jeep Wrangler JK, and Dodge Ram models, and is intended to replace failed original equipment steering parts with a durable service solution.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Inner Tie Rod End for Severe Duty
Dorman RD TI96031RD is a front left inner tie rod end built for demanding steering service on select Jeep Wrangler, Jeep Wrangler JK, and Dodge Ram applications. It is engineered for vehicles that see towing, hauling, off-road use, and other high-load conditions where steering precision and durability matter.
The RD, or Rugged Duty, product line is Dorman’s severe-service chassis range. TI96031RD uses a quenched and tempered steel bearing housing with a protective coated finish for added corrosion resistance, and the joint is pre-loaded with premium grease where applicable to help simplify service and maintain lubrication.
Key Features
- Front left inner tie rod end, positioned to the pitman arm
- Quenched and tempered steel housing for severe-duty service
- Coated finish for improved corrosion resistance
- Grease fitting included for serviceability
- Hardware package includes a castle nut, cotter pin, tie rod, and Zerk fitting
- Direct replacement for specified Jeep Wrangler, Jeep Wrangler JK, and Dodge Ram fitments
Detailed Description
TI96031RD is designed for steering systems that need dependable response under load. It cross-references MOOG Chassis Products ES3624 and Mopar 52060049AE for the same application. This part number, TI96031RD, is a practical OE-style replacement for drivers servicing a 2007-2017 Jeep Wrangler front left inner tie rod end, a 2018 Jeep Wrangler JK front left inner tie rod end, or a 2003-2008 Dodge Ram 2500 front left inner tie rod end. It also applies to select 2006-2008 Dodge Ram 1500 and 2003-2008 Dodge Ram 3500 configurations.
As part of Dorman RD Rugged Duty, this steering component is aimed at severe-duty chassis use where corrosion resistance, joint integrity, and consistent steering feel are important. The coated steel construction and serviceable grease fitting support long-term maintenance on work trucks and off-road vehicles.
Common Problems This Part Can Address
- Excessive steering play from a worn inner tie rod end
- Clunking or looseness in the front steering linkage
- Uneven tire wear caused by steering component wear
- Corrosion-related failure in exposed steering hardware
- Steering instability on towing, hauling, or off-road duty cycles
Installation Notes and Tips
Verify the vehicle’s steering configuration before installation and confirm the front left inner position matches the original part. After replacement, inspect related steering and suspension components, then perform a professional alignment to restore correct toe settings. Use the included grease fitting during routine maintenance where applicable to keep the joint properly lubricated.
Quality Assurance
Dorman RD components are built for severe-duty service with corrosion-resistant materials and protective coatings. TI96031RD is manufactured for specified applications on Jeep Wrangler, Jeep Wrangler JK, and Dodge Ram models, and is intended to replace failed original equipment steering parts with a durable service solution.
