Dorman TO82475RD Steering Tie Rod End - Front Outer
Dorman RD Outer Tie Rod End for Charger, Challenger, 300
Dorman RD TO82475RD is a front outer steering tie rod end built for severe-duty service on select Dodge and Chrysler applications. It uses a steel tie rod body with a coated finish, a tapered stud, and pre-greased construction to support dependable steering response in demanding use.
The RD - Rugged Duty line is engineered for vehicles that see heavy hauling, towing, off-road work, and emergency-service duty. For Dodge Charger, Dodge Challenger, and Chrysler 300 owners looking for a direct replacement outer tie rod end, TO82475RD is built around durability, corrosion resistance, and consistent steering performance.
Key Features
- Part number TO82475RD outer tie rod end for front outer steering applications
- Fits select 2011-2019 Dodge Charger, 2011-2017 Dodge Challenger, 2018 Dodge Challenger with hydraulic steering rack, and 2011-2014 Chrysler 300
- Steel construction with coated finish for added corrosion resistance
- Pre-greased joint with a polychloroprene dust boot
- Tapered stud design with clockwise thread direction on both ends
- Standard replacement grade for specified vehicles
- Cross-references Delphi TA5505 and MOOG Chassis Products ES800986 for the same application
Detailed Description
Dorman RD TO82475RD is a steering tie rod end designed as a replacement for failed original equipment on specified Dodge Charger, Dodge Challenger, and Chrysler 300 models. The RD line uses quenched and tempered steel bearing housings and a protective coating to improve durability in harsh operating conditions. This part number TO82475RD also includes corrosion-resistant hardware and a pre-lubricated joint design to help maintain steering feel and reduce service concerns over time.
Compatible With: 2011-2019 Dodge Charger, front outer; 2011-2017 Dodge Challenger, front outer; 2018 Dodge Challenger, front outer, with hydraulic steering rack; 2011-2014 Chrysler 300, front outer. This part cross-references Delphi TA5505 and MOOG Chassis Products ES800986 for the same application.
What It Helps Fix
- Loose or wandering steering at the front end
- Clunking or play from a worn outer tie rod end
- Uneven tire wear caused by steering linkage wear
- Corrosion-related failure in exposed steering components
- Steering response issues on high-mileage or severe-duty vehicles
Installation Notes and Tips
Verify thread size, pitch, and steering rack configuration before installation. TO82475RD uses 18 mm thread diameter on end 1, 10 mm thread diameter on end 2, and 1.25 mm thread pitch. After installation, a professional wheel alignment is required to restore correct toe settings and steering wheel position.
Quality Assurance
Dorman RD chassis components are engineered for severe-duty service and built with corrosion-resistant materials and coatings to support long-term use in demanding conditions. The RD line is intended for vehicles that must remain dependable under towing, hauling, and other high-load operation.
Dorman TO82475RD Steering Tie Rod End - Front Outer
Dorman RD Outer Tie Rod End for Charger, Challenger, 300
Dorman RD TO82475RD is a front outer steering tie rod end built for severe-duty service on select Dodge and Chrysler applications. It uses a steel tie rod body with a coated finish, a tapered stud, and pre-greased construction to support dependable steering response in demanding use.
The RD - Rugged Duty line is engineered for vehicles that see heavy hauling, towing, off-road work, and emergency-service duty. For Dodge Charger, Dodge Challenger, and Chrysler 300 owners looking for a direct replacement outer tie rod end, TO82475RD is built around durability, corrosion resistance, and consistent steering performance.
Key Features
- Part number TO82475RD outer tie rod end for front outer steering applications
- Fits select 2011-2019 Dodge Charger, 2011-2017 Dodge Challenger, 2018 Dodge Challenger with hydraulic steering rack, and 2011-2014 Chrysler 300
- Steel construction with coated finish for added corrosion resistance
- Pre-greased joint with a polychloroprene dust boot
- Tapered stud design with clockwise thread direction on both ends
- Standard replacement grade for specified vehicles
- Cross-references Delphi TA5505 and MOOG Chassis Products ES800986 for the same application
Detailed Description
Dorman RD TO82475RD is a steering tie rod end designed as a replacement for failed original equipment on specified Dodge Charger, Dodge Challenger, and Chrysler 300 models. The RD line uses quenched and tempered steel bearing housings and a protective coating to improve durability in harsh operating conditions. This part number TO82475RD also includes corrosion-resistant hardware and a pre-lubricated joint design to help maintain steering feel and reduce service concerns over time.
Compatible With: 2011-2019 Dodge Charger, front outer; 2011-2017 Dodge Challenger, front outer; 2018 Dodge Challenger, front outer, with hydraulic steering rack; 2011-2014 Chrysler 300, front outer. This part cross-references Delphi TA5505 and MOOG Chassis Products ES800986 for the same application.
What It Helps Fix
- Loose or wandering steering at the front end
- Clunking or play from a worn outer tie rod end
- Uneven tire wear caused by steering linkage wear
- Corrosion-related failure in exposed steering components
- Steering response issues on high-mileage or severe-duty vehicles
Installation Notes and Tips
Verify thread size, pitch, and steering rack configuration before installation. TO82475RD uses 18 mm thread diameter on end 1, 10 mm thread diameter on end 2, and 1.25 mm thread pitch. After installation, a professional wheel alignment is required to restore correct toe settings and steering wheel position.
Quality Assurance
Dorman RD chassis components are engineered for severe-duty service and built with corrosion-resistant materials and coatings to support long-term use in demanding conditions. The RD line is intended for vehicles that must remain dependable under towing, hauling, and other high-load operation.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Outer Tie Rod End for Charger, Challenger, 300
Dorman RD TO82475RD is a front outer steering tie rod end built for severe-duty service on select Dodge and Chrysler applications. It uses a steel tie rod body with a coated finish, a tapered stud, and pre-greased construction to support dependable steering response in demanding use.
The RD - Rugged Duty line is engineered for vehicles that see heavy hauling, towing, off-road work, and emergency-service duty. For Dodge Charger, Dodge Challenger, and Chrysler 300 owners looking for a direct replacement outer tie rod end, TO82475RD is built around durability, corrosion resistance, and consistent steering performance.
Key Features
- Part number TO82475RD outer tie rod end for front outer steering applications
- Fits select 2011-2019 Dodge Charger, 2011-2017 Dodge Challenger, 2018 Dodge Challenger with hydraulic steering rack, and 2011-2014 Chrysler 300
- Steel construction with coated finish for added corrosion resistance
- Pre-greased joint with a polychloroprene dust boot
- Tapered stud design with clockwise thread direction on both ends
- Standard replacement grade for specified vehicles
- Cross-references Delphi TA5505 and MOOG Chassis Products ES800986 for the same application
Detailed Description
Dorman RD TO82475RD is a steering tie rod end designed as a replacement for failed original equipment on specified Dodge Charger, Dodge Challenger, and Chrysler 300 models. The RD line uses quenched and tempered steel bearing housings and a protective coating to improve durability in harsh operating conditions. This part number TO82475RD also includes corrosion-resistant hardware and a pre-lubricated joint design to help maintain steering feel and reduce service concerns over time.
Compatible With: 2011-2019 Dodge Charger, front outer; 2011-2017 Dodge Challenger, front outer; 2018 Dodge Challenger, front outer, with hydraulic steering rack; 2011-2014 Chrysler 300, front outer. This part cross-references Delphi TA5505 and MOOG Chassis Products ES800986 for the same application.
What It Helps Fix
- Loose or wandering steering at the front end
- Clunking or play from a worn outer tie rod end
- Uneven tire wear caused by steering linkage wear
- Corrosion-related failure in exposed steering components
- Steering response issues on high-mileage or severe-duty vehicles
Installation Notes and Tips
Verify thread size, pitch, and steering rack configuration before installation. TO82475RD uses 18 mm thread diameter on end 1, 10 mm thread diameter on end 2, and 1.25 mm thread pitch. After installation, a professional wheel alignment is required to restore correct toe settings and steering wheel position.
Quality Assurance
Dorman RD chassis components are engineered for severe-duty service and built with corrosion-resistant materials and coatings to support long-term use in demanding conditions. The RD line is intended for vehicles that must remain dependable under towing, hauling, and other high-load operation.
