Dorman TO85021RD Steering Tie Rod End - Front Left Outer
Dorman RD Outer Tie Rod End for Ford and Lincoln
Dorman RD TO85021RD is a front left outer steering tie rod end built for severe-duty service. It is a direct replacement for select Ford Escape, Ford Focus, Ford C-Max, Ford Transit Connect, Ford Transit Custom, and Lincoln MKC applications that need dependable steering response under demanding use.
The RD, or Rugged Duty, product line is built for vehicles used in off-road work, towing, heavy hauling, and emergency service. This outer tie rod end uses a quenched and tempered steel housing with a protective coated finish, plus corrosion-resistant hardware and a pre-greased joint design for long-term service.
Key Features
- Part number TO85021RD from Dorman RD Rugged Duty
- Fits front left outer steering positions on select Ford and Lincoln vehicles
- Steel housing with coated finish for added corrosion resistance
- Pre-greased joint with dust boot and grease fitting included
- Straight, non-adjustable design with taper stud construction
- Thread directions: clockwise/right on both ends
- Cross-reference: MOOG Chassis Products ES800955
Detailed Product Overview
This steering tie rod end is engineered for the outer front left position on 2012-2019 Ford Focus, 2013-2019 Ford Escape, 2013-2018 Ford C-Max, 2014-2018 Ford Transit Connect, 2017-2018 Ford Transit Custom, and 2015-2019 Lincoln MKC. If you are replacing a worn Ford Escape outer tie rod end or servicing steering play on a Ford Focus or Lincoln MKC, TO85021RD provides the correct fitment for the listed applications.
Dorman RD chassis components are built for demanding service conditions where steering precision and durability matter. The steel tie rod material, metal bearing material, and polychloroprene dust boot are selected to handle repeated load cycles while helping protect the joint from contamination.
Common Problems This Part Can Address
- Steering looseness or excessive play at the front left wheel
- Clunking or knocking from a worn outer tie rod end
- Uneven tire wear caused by steering linkage wear
- Corrosion-related failure in exposed steering components
- Loss of steering precision on high-mileage Ford and Lincoln vehicles
Installation Notes and Tips
Verify the front left outer position before installation and confirm thread direction, stud taper, and dimensions against the original part. After replacement, a professional wheel alignment is recommended to restore steering geometry and tire wear characteristics. This part number is TO85021RD, and it is also referenced as TO85021RD in catalog listings for the same application.
Quality Assurance
Dorman RD steering components are manufactured for severe-duty use with corrosion-resistant finishes and durable steel construction. The pre-greased joint design and included grease fitting support routine maintenance for long service life in demanding Ford Escape, Ford Focus, and Lincoln MKC steering applications.
Dorman TO85021RD Steering Tie Rod End - Front Left Outer
Dorman RD Outer Tie Rod End for Ford and Lincoln
Dorman RD TO85021RD is a front left outer steering tie rod end built for severe-duty service. It is a direct replacement for select Ford Escape, Ford Focus, Ford C-Max, Ford Transit Connect, Ford Transit Custom, and Lincoln MKC applications that need dependable steering response under demanding use.
The RD, or Rugged Duty, product line is built for vehicles used in off-road work, towing, heavy hauling, and emergency service. This outer tie rod end uses a quenched and tempered steel housing with a protective coated finish, plus corrosion-resistant hardware and a pre-greased joint design for long-term service.
Key Features
- Part number TO85021RD from Dorman RD Rugged Duty
- Fits front left outer steering positions on select Ford and Lincoln vehicles
- Steel housing with coated finish for added corrosion resistance
- Pre-greased joint with dust boot and grease fitting included
- Straight, non-adjustable design with taper stud construction
- Thread directions: clockwise/right on both ends
- Cross-reference: MOOG Chassis Products ES800955
Detailed Product Overview
This steering tie rod end is engineered for the outer front left position on 2012-2019 Ford Focus, 2013-2019 Ford Escape, 2013-2018 Ford C-Max, 2014-2018 Ford Transit Connect, 2017-2018 Ford Transit Custom, and 2015-2019 Lincoln MKC. If you are replacing a worn Ford Escape outer tie rod end or servicing steering play on a Ford Focus or Lincoln MKC, TO85021RD provides the correct fitment for the listed applications.
Dorman RD chassis components are built for demanding service conditions where steering precision and durability matter. The steel tie rod material, metal bearing material, and polychloroprene dust boot are selected to handle repeated load cycles while helping protect the joint from contamination.
Common Problems This Part Can Address
- Steering looseness or excessive play at the front left wheel
- Clunking or knocking from a worn outer tie rod end
- Uneven tire wear caused by steering linkage wear
- Corrosion-related failure in exposed steering components
- Loss of steering precision on high-mileage Ford and Lincoln vehicles
Installation Notes and Tips
Verify the front left outer position before installation and confirm thread direction, stud taper, and dimensions against the original part. After replacement, a professional wheel alignment is recommended to restore steering geometry and tire wear characteristics. This part number is TO85021RD, and it is also referenced as TO85021RD in catalog listings for the same application.
Quality Assurance
Dorman RD steering components are manufactured for severe-duty use with corrosion-resistant finishes and durable steel construction. The pre-greased joint design and included grease fitting support routine maintenance for long service life in demanding Ford Escape, Ford Focus, and Lincoln MKC steering applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Dorman RD Outer Tie Rod End for Ford and Lincoln
Dorman RD TO85021RD is a front left outer steering tie rod end built for severe-duty service. It is a direct replacement for select Ford Escape, Ford Focus, Ford C-Max, Ford Transit Connect, Ford Transit Custom, and Lincoln MKC applications that need dependable steering response under demanding use.
The RD, or Rugged Duty, product line is built for vehicles used in off-road work, towing, heavy hauling, and emergency service. This outer tie rod end uses a quenched and tempered steel housing with a protective coated finish, plus corrosion-resistant hardware and a pre-greased joint design for long-term service.
Key Features
- Part number TO85021RD from Dorman RD Rugged Duty
- Fits front left outer steering positions on select Ford and Lincoln vehicles
- Steel housing with coated finish for added corrosion resistance
- Pre-greased joint with dust boot and grease fitting included
- Straight, non-adjustable design with taper stud construction
- Thread directions: clockwise/right on both ends
- Cross-reference: MOOG Chassis Products ES800955
Detailed Product Overview
This steering tie rod end is engineered for the outer front left position on 2012-2019 Ford Focus, 2013-2019 Ford Escape, 2013-2018 Ford C-Max, 2014-2018 Ford Transit Connect, 2017-2018 Ford Transit Custom, and 2015-2019 Lincoln MKC. If you are replacing a worn Ford Escape outer tie rod end or servicing steering play on a Ford Focus or Lincoln MKC, TO85021RD provides the correct fitment for the listed applications.
Dorman RD chassis components are built for demanding service conditions where steering precision and durability matter. The steel tie rod material, metal bearing material, and polychloroprene dust boot are selected to handle repeated load cycles while helping protect the joint from contamination.
Common Problems This Part Can Address
- Steering looseness or excessive play at the front left wheel
- Clunking or knocking from a worn outer tie rod end
- Uneven tire wear caused by steering linkage wear
- Corrosion-related failure in exposed steering components
- Loss of steering precision on high-mileage Ford and Lincoln vehicles
Installation Notes and Tips
Verify the front left outer position before installation and confirm thread direction, stud taper, and dimensions against the original part. After replacement, a professional wheel alignment is recommended to restore steering geometry and tire wear characteristics. This part number is TO85021RD, and it is also referenced as TO85021RD in catalog listings for the same application.
Quality Assurance
Dorman RD steering components are manufactured for severe-duty use with corrosion-resistant finishes and durable steel construction. The pre-greased joint design and included grease fitting support routine maintenance for long service life in demanding Ford Escape, Ford Focus, and Lincoln MKC steering applications.
