Gates CO35092 Engine Coolant Water Outlet
Coolant Outlet for Mitsubishi Cooling Repair
The Gates Coolant Outlet CO35092 is an engine coolant water outlet built for Mitsubishi cooling system service. It is made from aluminum and steel and includes the coolant outlet and gasket needed for a direct replacement-style repair on select Mitsubishi Outlander, Lancer, and Outlander Sport applications.
Gates Coolant Outlet parts are part of a full coverage program that ranges from individual water outlets to complete thermostat housing assemblies. The CO35092 is engineered to match original fit and function while addressing common aftermarket material and design concerns.
Key Features
- Engine coolant water outlet for select Mitsubishi vehicles
- Aluminum and steel construction for cooling system durability
- Direct replacement-style design for OE fit and performance
- Includes gasket for sealing at the mounting surface
- Two-bolt mounting pattern for the listed applications
- Gates Coolant Outlet line coverage for thermostat housing and outlet service
Detailed Product Information
Part number CO35092 is a Gates coolant outlet designed for Mitsubishi cooling system repairs where the original outlet has cracked, corroded, or begun leaking. The outlet features a 1.4-inch outside diameter, 1.18-inch inside diameter, and a two-bolt mounting layout. This makes it a practical service part for restoring coolant flow at the thermostat housing or outlet connection point. If you are searching for a Mitsubishi Outlander coolant outlet or a Mitsubishi Lancer engine coolant water outlet, CO35092 is the cataloged replacement for the listed vehicles.
This part cross-references 1305A072 for the same application. The Gates CO35092 is listed for 2008-2013 Mitsubishi Lancer, 2008-2010 Mitsubishi Outlander, 2011 Mitsubishi Outlander Sport, 2012-2013 Mitsubishi Outlander, 2013 Mitsubishi Outlander Sport, and 2016-2020 Mitsubishi Outlander.
Common Repair Uses
- Coolant seepage at the outlet or gasket surface
- Cracked or warped factory coolant outlet housing
- Corrosion at the coolant passage connection
- Loss of sealing at the thermostat housing outlet
- Service replacement during cooling system maintenance
Installation Notes and Tips
Before installation, verify the vehicle year, model, and outlet configuration against the catalog listing. Clean the mating surfaces thoroughly so the gasket can seal properly, and inspect adjacent hoses, clamps, and thermostat housing components for wear before reassembly. For best results, refill and bleed the cooling system according to Mitsubishi service procedures after the repair.
Quality Assurance
Gates positions the Coolant Outlet line as a cost-effective replacement solution that addresses common aftermarket material and manufacturing issues. CO35092 is built to fit and perform like the original part for the listed Mitsubishi applications, including Mitsubishi Outlander, Mitsubishi Lancer, and Mitsubishi Outlander Sport models.
Original: $67.58
-65%$67.58
$23.65Gates CO35092 Engine Coolant Water Outlet
Coolant Outlet for Mitsubishi Cooling Repair
The Gates Coolant Outlet CO35092 is an engine coolant water outlet built for Mitsubishi cooling system service. It is made from aluminum and steel and includes the coolant outlet and gasket needed for a direct replacement-style repair on select Mitsubishi Outlander, Lancer, and Outlander Sport applications.
Gates Coolant Outlet parts are part of a full coverage program that ranges from individual water outlets to complete thermostat housing assemblies. The CO35092 is engineered to match original fit and function while addressing common aftermarket material and design concerns.
Key Features
- Engine coolant water outlet for select Mitsubishi vehicles
- Aluminum and steel construction for cooling system durability
- Direct replacement-style design for OE fit and performance
- Includes gasket for sealing at the mounting surface
- Two-bolt mounting pattern for the listed applications
- Gates Coolant Outlet line coverage for thermostat housing and outlet service
Detailed Product Information
Part number CO35092 is a Gates coolant outlet designed for Mitsubishi cooling system repairs where the original outlet has cracked, corroded, or begun leaking. The outlet features a 1.4-inch outside diameter, 1.18-inch inside diameter, and a two-bolt mounting layout. This makes it a practical service part for restoring coolant flow at the thermostat housing or outlet connection point. If you are searching for a Mitsubishi Outlander coolant outlet or a Mitsubishi Lancer engine coolant water outlet, CO35092 is the cataloged replacement for the listed vehicles.
This part cross-references 1305A072 for the same application. The Gates CO35092 is listed for 2008-2013 Mitsubishi Lancer, 2008-2010 Mitsubishi Outlander, 2011 Mitsubishi Outlander Sport, 2012-2013 Mitsubishi Outlander, 2013 Mitsubishi Outlander Sport, and 2016-2020 Mitsubishi Outlander.
Common Repair Uses
- Coolant seepage at the outlet or gasket surface
- Cracked or warped factory coolant outlet housing
- Corrosion at the coolant passage connection
- Loss of sealing at the thermostat housing outlet
- Service replacement during cooling system maintenance
Installation Notes and Tips
Before installation, verify the vehicle year, model, and outlet configuration against the catalog listing. Clean the mating surfaces thoroughly so the gasket can seal properly, and inspect adjacent hoses, clamps, and thermostat housing components for wear before reassembly. For best results, refill and bleed the cooling system according to Mitsubishi service procedures after the repair.
Quality Assurance
Gates positions the Coolant Outlet line as a cost-effective replacement solution that addresses common aftermarket material and manufacturing issues. CO35092 is built to fit and perform like the original part for the listed Mitsubishi applications, including Mitsubishi Outlander, Mitsubishi Lancer, and Mitsubishi Outlander Sport models.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Coolant Outlet for Mitsubishi Cooling Repair
The Gates Coolant Outlet CO35092 is an engine coolant water outlet built for Mitsubishi cooling system service. It is made from aluminum and steel and includes the coolant outlet and gasket needed for a direct replacement-style repair on select Mitsubishi Outlander, Lancer, and Outlander Sport applications.
Gates Coolant Outlet parts are part of a full coverage program that ranges from individual water outlets to complete thermostat housing assemblies. The CO35092 is engineered to match original fit and function while addressing common aftermarket material and design concerns.
Key Features
- Engine coolant water outlet for select Mitsubishi vehicles
- Aluminum and steel construction for cooling system durability
- Direct replacement-style design for OE fit and performance
- Includes gasket for sealing at the mounting surface
- Two-bolt mounting pattern for the listed applications
- Gates Coolant Outlet line coverage for thermostat housing and outlet service
Detailed Product Information
Part number CO35092 is a Gates coolant outlet designed for Mitsubishi cooling system repairs where the original outlet has cracked, corroded, or begun leaking. The outlet features a 1.4-inch outside diameter, 1.18-inch inside diameter, and a two-bolt mounting layout. This makes it a practical service part for restoring coolant flow at the thermostat housing or outlet connection point. If you are searching for a Mitsubishi Outlander coolant outlet or a Mitsubishi Lancer engine coolant water outlet, CO35092 is the cataloged replacement for the listed vehicles.
This part cross-references 1305A072 for the same application. The Gates CO35092 is listed for 2008-2013 Mitsubishi Lancer, 2008-2010 Mitsubishi Outlander, 2011 Mitsubishi Outlander Sport, 2012-2013 Mitsubishi Outlander, 2013 Mitsubishi Outlander Sport, and 2016-2020 Mitsubishi Outlander.
Common Repair Uses
- Coolant seepage at the outlet or gasket surface
- Cracked or warped factory coolant outlet housing
- Corrosion at the coolant passage connection
- Loss of sealing at the thermostat housing outlet
- Service replacement during cooling system maintenance
Installation Notes and Tips
Before installation, verify the vehicle year, model, and outlet configuration against the catalog listing. Clean the mating surfaces thoroughly so the gasket can seal properly, and inspect adjacent hoses, clamps, and thermostat housing components for wear before reassembly. For best results, refill and bleed the cooling system according to Mitsubishi service procedures after the repair.
Quality Assurance
Gates positions the Coolant Outlet line as a cost-effective replacement solution that addresses common aftermarket material and manufacturing issues. CO35092 is built to fit and perform like the original part for the listed Mitsubishi applications, including Mitsubishi Outlander, Mitsubishi Lancer, and Mitsubishi Outlander Sport models.
