Moog ES3453 Steering Tie Rod End - Outer
MOOG ES3453 Outer Tie Rod End
MOOG ES3453 is an outer steering tie rod end built for direct replacement on select Chevrolet, Pontiac, and Oldsmobile applications. It uses a straight design with a dust boot and greaseable construction to support smoother steering response and easier service.
Key Features
- Outer steering tie rod end for the front steering linkage
- Straight design with female ends
- Greaseable construction for routine lubrication service
- Dust boot included to help protect internal components
- End 1 thread diameter: 14.0 mm, clockwise thread direction
- End 2 thread diameter: 12.0 mm with 1.25 pitch
- Stud center to end length: 4.900 in.
Detailed Description
MOOG ES3453 is engineered for outer tie rod end replacement where precise steering feel and dependable joint movement matter. Backed by MOOG’s material selection and testing standards, this part is built for service on vehicles such as the Chevrolet Impala, Chevrolet Monte Carlo, Pontiac Grand Prix, Pontiac Montana, Pontiac Trans Sport, and Oldsmobile Silhouette. It is a fitment-based solution for drivers searching for a Chevrolet Impala outer tie rod end, Pontiac Grand Prix steering tie rod end, or MOOG ES3453 replacement part.
This part cross-references Mevotech Supreme MES3453 and ACI 382042 for the same application.
What It Helps Address
- Loose or vague steering feel at the front wheels
- Clunking or play from a worn outer tie rod end
- Uneven toe settings caused by steering linkage wear
- Grease loss or contamination at the joint area
- Reduced steering response on high-mileage suspension systems
Installation Notes and Tips
Fits 2014-2016 Chevrolet Impala Limited, Outer; with FE3 SPORT Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 2007-2013 Chevrolet Impala, Outer; with FE3 SPORT Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 2006-2009 Chevrolet Impala, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 2006-2007 Chevrolet Monte Carlo, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 2004-2007 Chevrolet Monte Carlo, Outer; with FE4 SPECIAL Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 2004-2005 Chevrolet Impala, Outer; with FE4 SPECIAL Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 1999-2005 Pontiac Montana, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 1997-2004 Oldsmobile Silhouette, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 1997-2003 Pontiac Grand Prix, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 1997-1999 Pontiac Trans Sport, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link.
After installation, a professional alignment is recommended to restore steering geometry and tire wear characteristics. Verify thread direction, thread diameter, and suspension package before installation on Chevrolet Impala, Chevrolet Monte Carlo, and Pontiac Grand Prix applications.
Quality Assurance
MOOG steering components are backed by material and testing standards focused on consistent fit and serviceability. ES3453 is designed with a greaseable joint and protective boot to support long-term maintenance access and dependable operation.
Original: $33.30
-65%$33.30
$11.65Moog ES3453 Steering Tie Rod End - Outer
MOOG ES3453 Outer Tie Rod End
MOOG ES3453 is an outer steering tie rod end built for direct replacement on select Chevrolet, Pontiac, and Oldsmobile applications. It uses a straight design with a dust boot and greaseable construction to support smoother steering response and easier service.
Key Features
- Outer steering tie rod end for the front steering linkage
- Straight design with female ends
- Greaseable construction for routine lubrication service
- Dust boot included to help protect internal components
- End 1 thread diameter: 14.0 mm, clockwise thread direction
- End 2 thread diameter: 12.0 mm with 1.25 pitch
- Stud center to end length: 4.900 in.
Detailed Description
MOOG ES3453 is engineered for outer tie rod end replacement where precise steering feel and dependable joint movement matter. Backed by MOOG’s material selection and testing standards, this part is built for service on vehicles such as the Chevrolet Impala, Chevrolet Monte Carlo, Pontiac Grand Prix, Pontiac Montana, Pontiac Trans Sport, and Oldsmobile Silhouette. It is a fitment-based solution for drivers searching for a Chevrolet Impala outer tie rod end, Pontiac Grand Prix steering tie rod end, or MOOG ES3453 replacement part.
This part cross-references Mevotech Supreme MES3453 and ACI 382042 for the same application.
What It Helps Address
- Loose or vague steering feel at the front wheels
- Clunking or play from a worn outer tie rod end
- Uneven toe settings caused by steering linkage wear
- Grease loss or contamination at the joint area
- Reduced steering response on high-mileage suspension systems
Installation Notes and Tips
Fits 2014-2016 Chevrolet Impala Limited, Outer; with FE3 SPORT Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 2007-2013 Chevrolet Impala, Outer; with FE3 SPORT Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 2006-2009 Chevrolet Impala, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 2006-2007 Chevrolet Monte Carlo, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 2004-2007 Chevrolet Monte Carlo, Outer; with FE4 SPECIAL Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 2004-2005 Chevrolet Impala, Outer; with FE4 SPECIAL Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 1999-2005 Pontiac Montana, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 1997-2004 Oldsmobile Silhouette, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 1997-2003 Pontiac Grand Prix, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 1997-1999 Pontiac Trans Sport, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link.
After installation, a professional alignment is recommended to restore steering geometry and tire wear characteristics. Verify thread direction, thread diameter, and suspension package before installation on Chevrolet Impala, Chevrolet Monte Carlo, and Pontiac Grand Prix applications.
Quality Assurance
MOOG steering components are backed by material and testing standards focused on consistent fit and serviceability. ES3453 is designed with a greaseable joint and protective boot to support long-term maintenance access and dependable operation.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
MOOG ES3453 Outer Tie Rod End
MOOG ES3453 is an outer steering tie rod end built for direct replacement on select Chevrolet, Pontiac, and Oldsmobile applications. It uses a straight design with a dust boot and greaseable construction to support smoother steering response and easier service.
Key Features
- Outer steering tie rod end for the front steering linkage
- Straight design with female ends
- Greaseable construction for routine lubrication service
- Dust boot included to help protect internal components
- End 1 thread diameter: 14.0 mm, clockwise thread direction
- End 2 thread diameter: 12.0 mm with 1.25 pitch
- Stud center to end length: 4.900 in.
Detailed Description
MOOG ES3453 is engineered for outer tie rod end replacement where precise steering feel and dependable joint movement matter. Backed by MOOG’s material selection and testing standards, this part is built for service on vehicles such as the Chevrolet Impala, Chevrolet Monte Carlo, Pontiac Grand Prix, Pontiac Montana, Pontiac Trans Sport, and Oldsmobile Silhouette. It is a fitment-based solution for drivers searching for a Chevrolet Impala outer tie rod end, Pontiac Grand Prix steering tie rod end, or MOOG ES3453 replacement part.
This part cross-references Mevotech Supreme MES3453 and ACI 382042 for the same application.
What It Helps Address
- Loose or vague steering feel at the front wheels
- Clunking or play from a worn outer tie rod end
- Uneven toe settings caused by steering linkage wear
- Grease loss or contamination at the joint area
- Reduced steering response on high-mileage suspension systems
Installation Notes and Tips
Fits 2014-2016 Chevrolet Impala Limited, Outer; with FE3 SPORT Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 2007-2013 Chevrolet Impala, Outer; with FE3 SPORT Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 2006-2009 Chevrolet Impala, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 2006-2007 Chevrolet Monte Carlo, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 2004-2007 Chevrolet Monte Carlo, Outer; with FE4 SPECIAL Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 2004-2005 Chevrolet Impala, Outer; with FE4 SPECIAL Suspension; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces. Fits 1999-2005 Pontiac Montana, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 1997-2004 Oldsmobile Silhouette, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 1997-2003 Pontiac Grand Prix, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link. Fits 1997-1999 Pontiac Trans Sport, Outer; Enhanced lubrication improves steering performance for Suspension Stabilizer Bar Link.
After installation, a professional alignment is recommended to restore steering geometry and tire wear characteristics. Verify thread direction, thread diameter, and suspension package before installation on Chevrolet Impala, Chevrolet Monte Carlo, and Pontiac Grand Prix applications.
Quality Assurance
MOOG steering components are backed by material and testing standards focused on consistent fit and serviceability. ES3453 is designed with a greaseable joint and protective boot to support long-term maintenance access and dependable operation.
