Moog K5329 Suspension Stabilizer Bar Bushing Kit - Front To Frame
Moog K5329 Sway Bar Bushing Kit
Restore front stabilizer bar support with the Moog K5329 suspension stabilizer bar bushing kit. Built with thermoplastic and sized for a 1.250-inch sway bar, this front-to-frame sway bar bushing is made for direct replacement on select Buick, Oldsmobile, Pontiac, and Cadillac applications.
For drivers searching for a front sway bar bushing for 1986-1999 Buick LeSabre, 1987-1999 Pontiac Bonneville, or 1985-1996 Oldsmobile 98, Moog K5329 provides an OE-spec replacement that exceeds original manufacturer requirements. The K5329 part number is also a common reference for chassis repair work on GM full-size platforms.
Key Features
- Thermoplastic construction for consistent bushing support
- Fits a 1.250-inch sway bar diameter
- Front to frame stabilizer bar bushing application
- Meets and exceeds OE manufacturer specifications
- Designed for select GM vehicles with a 32mm sway bar diameter
- Cross-reference part numbers include Mevotech Supreme MK5329 and 45G0690
Detailed Description
The Moog K5329 sway bar bushing kit is a suspension service part for the front stabilizer bar mounting point. It is engineered for vehicles that use a 32mm front sway bar and is listed for applications including Buick LeSabre, Oldsmobile 88, Oldsmobile LSS, Pontiac Bonneville, Oldsmobile Regency, Buick Park Avenue, Oldsmobile 98, Cadillac Commercial Chassis, Cadillac DeVille, Cadillac Fleetwood, and Oldsmobile Delta 88. Moog focuses on design updates that improve service life and make replacement easier, which is why this K5329 bushing is a practical choice for chassis repair.
What It Helps Fix
- Front sway bar movement at the frame mount
- Clunking or rattling from worn stabilizer bar bushings
- Excessive play in the front suspension stabilizer bar
- Loss of steering response caused by deteriorated bushing material
- Noise from a dry, cracked, or compressed sway bar bushing
Installation Notes and Tips
Verify the sway bar diameter before installation; this part is specified for a 1.250-inch bar diameter and 32mm applications. Inspect the stabilizer bar and mounting surfaces for wear before installing the new bushing. Hardware and dust boots are not included, so reuse or replace related components as needed during service. Confirm the vehicle position as front to frame before ordering.
Quality Assurance
Moog is known in chassis service for continual product updates that improve durability and simplify replacement. The K5329 is built to exceed OE manufacturer specifications for the listed applications, supporting a precise replacement for front stabilizer bar service.
Original: $24.79
-65%$24.79
$8.68Moog K5329 Suspension Stabilizer Bar Bushing Kit - Front To Frame
Moog K5329 Sway Bar Bushing Kit
Restore front stabilizer bar support with the Moog K5329 suspension stabilizer bar bushing kit. Built with thermoplastic and sized for a 1.250-inch sway bar, this front-to-frame sway bar bushing is made for direct replacement on select Buick, Oldsmobile, Pontiac, and Cadillac applications.
For drivers searching for a front sway bar bushing for 1986-1999 Buick LeSabre, 1987-1999 Pontiac Bonneville, or 1985-1996 Oldsmobile 98, Moog K5329 provides an OE-spec replacement that exceeds original manufacturer requirements. The K5329 part number is also a common reference for chassis repair work on GM full-size platforms.
Key Features
- Thermoplastic construction for consistent bushing support
- Fits a 1.250-inch sway bar diameter
- Front to frame stabilizer bar bushing application
- Meets and exceeds OE manufacturer specifications
- Designed for select GM vehicles with a 32mm sway bar diameter
- Cross-reference part numbers include Mevotech Supreme MK5329 and 45G0690
Detailed Description
The Moog K5329 sway bar bushing kit is a suspension service part for the front stabilizer bar mounting point. It is engineered for vehicles that use a 32mm front sway bar and is listed for applications including Buick LeSabre, Oldsmobile 88, Oldsmobile LSS, Pontiac Bonneville, Oldsmobile Regency, Buick Park Avenue, Oldsmobile 98, Cadillac Commercial Chassis, Cadillac DeVille, Cadillac Fleetwood, and Oldsmobile Delta 88. Moog focuses on design updates that improve service life and make replacement easier, which is why this K5329 bushing is a practical choice for chassis repair.
What It Helps Fix
- Front sway bar movement at the frame mount
- Clunking or rattling from worn stabilizer bar bushings
- Excessive play in the front suspension stabilizer bar
- Loss of steering response caused by deteriorated bushing material
- Noise from a dry, cracked, or compressed sway bar bushing
Installation Notes and Tips
Verify the sway bar diameter before installation; this part is specified for a 1.250-inch bar diameter and 32mm applications. Inspect the stabilizer bar and mounting surfaces for wear before installing the new bushing. Hardware and dust boots are not included, so reuse or replace related components as needed during service. Confirm the vehicle position as front to frame before ordering.
Quality Assurance
Moog is known in chassis service for continual product updates that improve durability and simplify replacement. The K5329 is built to exceed OE manufacturer specifications for the listed applications, supporting a precise replacement for front stabilizer bar service.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Moog K5329 Sway Bar Bushing Kit
Restore front stabilizer bar support with the Moog K5329 suspension stabilizer bar bushing kit. Built with thermoplastic and sized for a 1.250-inch sway bar, this front-to-frame sway bar bushing is made for direct replacement on select Buick, Oldsmobile, Pontiac, and Cadillac applications.
For drivers searching for a front sway bar bushing for 1986-1999 Buick LeSabre, 1987-1999 Pontiac Bonneville, or 1985-1996 Oldsmobile 98, Moog K5329 provides an OE-spec replacement that exceeds original manufacturer requirements. The K5329 part number is also a common reference for chassis repair work on GM full-size platforms.
Key Features
- Thermoplastic construction for consistent bushing support
- Fits a 1.250-inch sway bar diameter
- Front to frame stabilizer bar bushing application
- Meets and exceeds OE manufacturer specifications
- Designed for select GM vehicles with a 32mm sway bar diameter
- Cross-reference part numbers include Mevotech Supreme MK5329 and 45G0690
Detailed Description
The Moog K5329 sway bar bushing kit is a suspension service part for the front stabilizer bar mounting point. It is engineered for vehicles that use a 32mm front sway bar and is listed for applications including Buick LeSabre, Oldsmobile 88, Oldsmobile LSS, Pontiac Bonneville, Oldsmobile Regency, Buick Park Avenue, Oldsmobile 98, Cadillac Commercial Chassis, Cadillac DeVille, Cadillac Fleetwood, and Oldsmobile Delta 88. Moog focuses on design updates that improve service life and make replacement easier, which is why this K5329 bushing is a practical choice for chassis repair.
What It Helps Fix
- Front sway bar movement at the frame mount
- Clunking or rattling from worn stabilizer bar bushings
- Excessive play in the front suspension stabilizer bar
- Loss of steering response caused by deteriorated bushing material
- Noise from a dry, cracked, or compressed sway bar bushing
Installation Notes and Tips
Verify the sway bar diameter before installation; this part is specified for a 1.250-inch bar diameter and 32mm applications. Inspect the stabilizer bar and mounting surfaces for wear before installing the new bushing. Hardware and dust boots are not included, so reuse or replace related components as needed during service. Confirm the vehicle position as front to frame before ordering.
Quality Assurance
Moog is known in chassis service for continual product updates that improve durability and simplify replacement. The K5329 is built to exceed OE manufacturer specifications for the listed applications, supporting a precise replacement for front stabilizer bar service.
