Moog K6679 Suspension Stabilizer Bar Bushing Kit - Front To Frame
MOOG K6679 Sway Bar Bushing Kit
Restore front stabilizer bar support with the MOOG K6679 sway bar bushing kit. Built with thermoplastic material and sized for a 0.950-inch sway bar, this replacement helps maintain proper bar location at the frame on select Chevrolet, Pontiac, and Oldsmobile applications.
Compatible with front-to-frame applications on the Chevrolet Cavalier, Chevrolet Classic, Pontiac Grand Am, Pontiac Sunfire, Oldsmobile Alero, Chevrolet Malibu, and Oldsmobile Cutlass, MOOG K6679 is an OE-style suspension service part for vehicles using a 24 mm sway bar diameter.
Key Features
- Thermoplastic construction for consistent bushing support
- 0.950-inch inner diameter for 24 mm sway bar applications
- Front-to-frame stabilizer bar bushing replacement
- Meets and exceeds OE manufacturer specifications
- Designed for clean, straightforward service on select GM platforms
- Part number K6679 for easy identification
Detailed Description
MOOG K6679 is a suspension stabilizer bar bushing kit engineered for front frame mounting on select compact and midsize GM vehicles. The bushing dimensions include a 0.950-inch bar diameter, 1.690-inch outer diameter, and 1.980-inch length, helping provide a precise fit around the sway bar while supporting stable suspension operation. This part cross-references Mevotech Supreme MK6679 for the same application.
Use K6679 when servicing front sway bar bushings on 1995-2005 Chevrolet Cavalier, 2004-2005 Chevrolet Classic, 1999-2005 Pontiac Grand Am, 1995-2005 Pontiac Sunfire, 1999-2004 Oldsmobile Alero, 1997-2003 Chevrolet Malibu, and 1997-1999 Oldsmobile Cutlass. The MOOG K6679 part number is commonly searched by drivers and technicians looking for a direct-fit front stabilizer bar bushing solution.
What It Helps Address
- Clunking or rattling from worn front sway bar bushings
- Excessive play at the stabilizer bar mounting point
- Loss of suspension control caused by deteriorated bushing material
- Noise during cornering, braking, or uneven-road driving
- Fitment issues when replacing a 24 mm front-to-frame bushing
Installation Notes and Tips
Confirm the sway bar diameter before installation; this part is specified for a 24 mm bar. Inspect the mounting surface and surrounding hardware for wear, corrosion, or deformation before reassembly. Because hardware is not included, reuse or replace mounting components as needed during service. Verify front-to-frame placement and compare the removed bushing to the new MOOG K6679 before installation.
Quality Assurance
MOOG backs this bushing with superior materials and rigorous testing, and the design is intended to meet demanding suspension service requirements. The part is engineered to exceed OE manufacturer specifications for the listed applications, supporting dependable replacement performance on compatible Chevrolet Cavalier, Pontiac Sunfire, and related GM models.
Original: $24.94
-65%$24.94
$8.73Moog K6679 Suspension Stabilizer Bar Bushing Kit - Front To Frame
MOOG K6679 Sway Bar Bushing Kit
Restore front stabilizer bar support with the MOOG K6679 sway bar bushing kit. Built with thermoplastic material and sized for a 0.950-inch sway bar, this replacement helps maintain proper bar location at the frame on select Chevrolet, Pontiac, and Oldsmobile applications.
Compatible with front-to-frame applications on the Chevrolet Cavalier, Chevrolet Classic, Pontiac Grand Am, Pontiac Sunfire, Oldsmobile Alero, Chevrolet Malibu, and Oldsmobile Cutlass, MOOG K6679 is an OE-style suspension service part for vehicles using a 24 mm sway bar diameter.
Key Features
- Thermoplastic construction for consistent bushing support
- 0.950-inch inner diameter for 24 mm sway bar applications
- Front-to-frame stabilizer bar bushing replacement
- Meets and exceeds OE manufacturer specifications
- Designed for clean, straightforward service on select GM platforms
- Part number K6679 for easy identification
Detailed Description
MOOG K6679 is a suspension stabilizer bar bushing kit engineered for front frame mounting on select compact and midsize GM vehicles. The bushing dimensions include a 0.950-inch bar diameter, 1.690-inch outer diameter, and 1.980-inch length, helping provide a precise fit around the sway bar while supporting stable suspension operation. This part cross-references Mevotech Supreme MK6679 for the same application.
Use K6679 when servicing front sway bar bushings on 1995-2005 Chevrolet Cavalier, 2004-2005 Chevrolet Classic, 1999-2005 Pontiac Grand Am, 1995-2005 Pontiac Sunfire, 1999-2004 Oldsmobile Alero, 1997-2003 Chevrolet Malibu, and 1997-1999 Oldsmobile Cutlass. The MOOG K6679 part number is commonly searched by drivers and technicians looking for a direct-fit front stabilizer bar bushing solution.
What It Helps Address
- Clunking or rattling from worn front sway bar bushings
- Excessive play at the stabilizer bar mounting point
- Loss of suspension control caused by deteriorated bushing material
- Noise during cornering, braking, or uneven-road driving
- Fitment issues when replacing a 24 mm front-to-frame bushing
Installation Notes and Tips
Confirm the sway bar diameter before installation; this part is specified for a 24 mm bar. Inspect the mounting surface and surrounding hardware for wear, corrosion, or deformation before reassembly. Because hardware is not included, reuse or replace mounting components as needed during service. Verify front-to-frame placement and compare the removed bushing to the new MOOG K6679 before installation.
Quality Assurance
MOOG backs this bushing with superior materials and rigorous testing, and the design is intended to meet demanding suspension service requirements. The part is engineered to exceed OE manufacturer specifications for the listed applications, supporting dependable replacement performance on compatible Chevrolet Cavalier, Pontiac Sunfire, and related GM models.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
MOOG K6679 Sway Bar Bushing Kit
Restore front stabilizer bar support with the MOOG K6679 sway bar bushing kit. Built with thermoplastic material and sized for a 0.950-inch sway bar, this replacement helps maintain proper bar location at the frame on select Chevrolet, Pontiac, and Oldsmobile applications.
Compatible with front-to-frame applications on the Chevrolet Cavalier, Chevrolet Classic, Pontiac Grand Am, Pontiac Sunfire, Oldsmobile Alero, Chevrolet Malibu, and Oldsmobile Cutlass, MOOG K6679 is an OE-style suspension service part for vehicles using a 24 mm sway bar diameter.
Key Features
- Thermoplastic construction for consistent bushing support
- 0.950-inch inner diameter for 24 mm sway bar applications
- Front-to-frame stabilizer bar bushing replacement
- Meets and exceeds OE manufacturer specifications
- Designed for clean, straightforward service on select GM platforms
- Part number K6679 for easy identification
Detailed Description
MOOG K6679 is a suspension stabilizer bar bushing kit engineered for front frame mounting on select compact and midsize GM vehicles. The bushing dimensions include a 0.950-inch bar diameter, 1.690-inch outer diameter, and 1.980-inch length, helping provide a precise fit around the sway bar while supporting stable suspension operation. This part cross-references Mevotech Supreme MK6679 for the same application.
Use K6679 when servicing front sway bar bushings on 1995-2005 Chevrolet Cavalier, 2004-2005 Chevrolet Classic, 1999-2005 Pontiac Grand Am, 1995-2005 Pontiac Sunfire, 1999-2004 Oldsmobile Alero, 1997-2003 Chevrolet Malibu, and 1997-1999 Oldsmobile Cutlass. The MOOG K6679 part number is commonly searched by drivers and technicians looking for a direct-fit front stabilizer bar bushing solution.
What It Helps Address
- Clunking or rattling from worn front sway bar bushings
- Excessive play at the stabilizer bar mounting point
- Loss of suspension control caused by deteriorated bushing material
- Noise during cornering, braking, or uneven-road driving
- Fitment issues when replacing a 24 mm front-to-frame bushing
Installation Notes and Tips
Confirm the sway bar diameter before installation; this part is specified for a 24 mm bar. Inspect the mounting surface and surrounding hardware for wear, corrosion, or deformation before reassembly. Because hardware is not included, reuse or replace mounting components as needed during service. Verify front-to-frame placement and compare the removed bushing to the new MOOG K6679 before installation.
Quality Assurance
MOOG backs this bushing with superior materials and rigorous testing, and the design is intended to meet demanding suspension service requirements. The part is engineered to exceed OE manufacturer specifications for the listed applications, supporting dependable replacement performance on compatible Chevrolet Cavalier, Pontiac Sunfire, and related GM models.
