Moog K7222 Suspension Stabilizer Bar Bushing Kit - Front To Control Arm or Front To Frame
Moog K7222 Sway Bar Bushing Kit
Restore front-end stability with the Moog K7222 suspension stabilizer bar bushing kit. This rubber sway bar bushing is built for front-to-frame and front-to-control-arm applications on select Chrysler, Dodge, and Plymouth vehicles, including Chrysler LeBaron, Dodge Spirit, and Plymouth Acclaim fitments.
Moog focuses on design updates that improve service life and make replacement easier, which is why the K7222 is a practical OE-style choice for aging suspension systems. It is engineered to meet and exceed OE manufacturer specs for the listed 1-1/16 inch sway bar applications.
Key Features
- Brand: Moog
- Part number: K7222
- Rubber construction for sway bar isolation and support
- Inner diameter: 1.060 inch; bar diameter: 1.060 inch
- Outer diameter: 2.350 inch; length: 1.350 inch
- Meets or exceeds OE manufacturer specifications
- Fits front-to-frame and front-to-control-arm locations, depending on application
- Designed for vehicles using a 1-1/16 inch front sway bar
Detailed Description
The Moog K7222 sway bar bushing kit is a suspension stabilizer bar bushing replacement for select Chrysler, Dodge, and Plymouth models from 1984-1995. It is commonly used on front suspension stabilizer bar mounts for vehicles such as Chrysler LeBaron, Dodge Caravan, and Plymouth Voyager, where worn bushings can allow excess movement in the sway bar assembly. This part cross-references Mevotech Supreme MK7222 for the same application.
By restoring a tighter interface between the stabilizer bar and its mounting point, the K7222 helps maintain consistent suspension response on compatible Chrysler LeBaron, Dodge Spirit, and Plymouth Acclaim applications. The rubber material is selected for the listed OE-style fitment dimensions and the part is specified for 1-1/16 inch sway bar diameter applications.
What It Is Used For
- Front sway bar clunking or rattling from worn bushings
- Excess stabilizer bar movement at the frame or control arm mount
- Loose-feeling front suspension response during cornering
- Noise caused by hardened, cracked, or compressed rubber bushings
- Replacement on Chrysler, Dodge, and Plymouth front stabilizer bar service
Installation Notes and Tips
Verify the sway bar diameter before ordering; this part is specified for a 1.060 inch, or 1-1/16 inch, bar. Confirm whether your vehicle uses a front-to-frame or front-to-control-arm mounting location, since both positions appear in the listed fitment. Inspect the stabilizer bar and mounting surfaces for wear before installation, and note that hardware and dust boots are not included.
Quality Assurance
Moog is known in the chassis market for ongoing design improvements that extend product life and simplify replacement. The K7222 is listed as meeting or exceeding OE manufacturer specifications for the applications shown.
Compatible Vehicles
- Fits 1984-1995 Chrysler LeBaron, front to frame
- Fits 1989-1995 Dodge Spirit, front to frame
- Fits 1989-1995 Plymouth Acclaim, front to frame
- Fits 1987-1994 Dodge Shadow, front to frame
- Fits 1987-1994 Plymouth Sundance, front to frame
- Fits 1984-1993 Chrysler Daytona, front to frame
- Fits 1988-1993 Chrysler Dynasty, front to frame
- Fits 1990-1993 Chrysler Imperial, front to frame
- Fits 1984-1993 Chrysler New Yorker, front to frame
- Fits 1984-1993 Dodge Daytona, front to frame
- Fits 1990 Chrysler Town & Country, front to frame
- Fits 1985-1988 Chrysler Town & Country, front to frame
- Fits 1984-1990 Dodge Caravan, front to frame
- Fits 1987-1990 Dodge Grand Caravan, front to frame
- Fits 1987-1990 Plymouth Grand Voyager, front to frame
- Fits 1984-1990 Plymouth Voyager, front to frame
- Fits 1984-1989 Dodge Aries, front to frame
- Fits 1985-1989 Dodge Lancer, front to frame
- Fits 1984-1989 Plymouth Reliant, front to frame
- Fits 1984-1988 Dodge 600, front to frame
- Fits 1984-1987 Dodge Charger, front to frame
- Fits 1984-1987 Plymouth Turismo, front to frame
- Fits 1984-1986 Chrysler Laser, front to control arm
- Fits 1984-1986 Plymouth Turismo 2.2, front to frame
- Fits 1984 Dodge Rampage, front to frame
Moog K7222 Suspension Stabilizer Bar Bushing Kit - Front To Control Arm or Front To Frame
Moog K7222 Sway Bar Bushing Kit
Restore front-end stability with the Moog K7222 suspension stabilizer bar bushing kit. This rubber sway bar bushing is built for front-to-frame and front-to-control-arm applications on select Chrysler, Dodge, and Plymouth vehicles, including Chrysler LeBaron, Dodge Spirit, and Plymouth Acclaim fitments.
Moog focuses on design updates that improve service life and make replacement easier, which is why the K7222 is a practical OE-style choice for aging suspension systems. It is engineered to meet and exceed OE manufacturer specs for the listed 1-1/16 inch sway bar applications.
Key Features
- Brand: Moog
- Part number: K7222
- Rubber construction for sway bar isolation and support
- Inner diameter: 1.060 inch; bar diameter: 1.060 inch
- Outer diameter: 2.350 inch; length: 1.350 inch
- Meets or exceeds OE manufacturer specifications
- Fits front-to-frame and front-to-control-arm locations, depending on application
- Designed for vehicles using a 1-1/16 inch front sway bar
Detailed Description
The Moog K7222 sway bar bushing kit is a suspension stabilizer bar bushing replacement for select Chrysler, Dodge, and Plymouth models from 1984-1995. It is commonly used on front suspension stabilizer bar mounts for vehicles such as Chrysler LeBaron, Dodge Caravan, and Plymouth Voyager, where worn bushings can allow excess movement in the sway bar assembly. This part cross-references Mevotech Supreme MK7222 for the same application.
By restoring a tighter interface between the stabilizer bar and its mounting point, the K7222 helps maintain consistent suspension response on compatible Chrysler LeBaron, Dodge Spirit, and Plymouth Acclaim applications. The rubber material is selected for the listed OE-style fitment dimensions and the part is specified for 1-1/16 inch sway bar diameter applications.
What It Is Used For
- Front sway bar clunking or rattling from worn bushings
- Excess stabilizer bar movement at the frame or control arm mount
- Loose-feeling front suspension response during cornering
- Noise caused by hardened, cracked, or compressed rubber bushings
- Replacement on Chrysler, Dodge, and Plymouth front stabilizer bar service
Installation Notes and Tips
Verify the sway bar diameter before ordering; this part is specified for a 1.060 inch, or 1-1/16 inch, bar. Confirm whether your vehicle uses a front-to-frame or front-to-control-arm mounting location, since both positions appear in the listed fitment. Inspect the stabilizer bar and mounting surfaces for wear before installation, and note that hardware and dust boots are not included.
Quality Assurance
Moog is known in the chassis market for ongoing design improvements that extend product life and simplify replacement. The K7222 is listed as meeting or exceeding OE manufacturer specifications for the applications shown.
Compatible Vehicles
- Fits 1984-1995 Chrysler LeBaron, front to frame
- Fits 1989-1995 Dodge Spirit, front to frame
- Fits 1989-1995 Plymouth Acclaim, front to frame
- Fits 1987-1994 Dodge Shadow, front to frame
- Fits 1987-1994 Plymouth Sundance, front to frame
- Fits 1984-1993 Chrysler Daytona, front to frame
- Fits 1988-1993 Chrysler Dynasty, front to frame
- Fits 1990-1993 Chrysler Imperial, front to frame
- Fits 1984-1993 Chrysler New Yorker, front to frame
- Fits 1984-1993 Dodge Daytona, front to frame
- Fits 1990 Chrysler Town & Country, front to frame
- Fits 1985-1988 Chrysler Town & Country, front to frame
- Fits 1984-1990 Dodge Caravan, front to frame
- Fits 1987-1990 Dodge Grand Caravan, front to frame
- Fits 1987-1990 Plymouth Grand Voyager, front to frame
- Fits 1984-1990 Plymouth Voyager, front to frame
- Fits 1984-1989 Dodge Aries, front to frame
- Fits 1985-1989 Dodge Lancer, front to frame
- Fits 1984-1989 Plymouth Reliant, front to frame
- Fits 1984-1988 Dodge 600, front to frame
- Fits 1984-1987 Dodge Charger, front to frame
- Fits 1984-1987 Plymouth Turismo, front to frame
- Fits 1984-1986 Chrysler Laser, front to control arm
- Fits 1984-1986 Plymouth Turismo 2.2, front to frame
- Fits 1984 Dodge Rampage, front to frame
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Moog K7222 Sway Bar Bushing Kit
Restore front-end stability with the Moog K7222 suspension stabilizer bar bushing kit. This rubber sway bar bushing is built for front-to-frame and front-to-control-arm applications on select Chrysler, Dodge, and Plymouth vehicles, including Chrysler LeBaron, Dodge Spirit, and Plymouth Acclaim fitments.
Moog focuses on design updates that improve service life and make replacement easier, which is why the K7222 is a practical OE-style choice for aging suspension systems. It is engineered to meet and exceed OE manufacturer specs for the listed 1-1/16 inch sway bar applications.
Key Features
- Brand: Moog
- Part number: K7222
- Rubber construction for sway bar isolation and support
- Inner diameter: 1.060 inch; bar diameter: 1.060 inch
- Outer diameter: 2.350 inch; length: 1.350 inch
- Meets or exceeds OE manufacturer specifications
- Fits front-to-frame and front-to-control-arm locations, depending on application
- Designed for vehicles using a 1-1/16 inch front sway bar
Detailed Description
The Moog K7222 sway bar bushing kit is a suspension stabilizer bar bushing replacement for select Chrysler, Dodge, and Plymouth models from 1984-1995. It is commonly used on front suspension stabilizer bar mounts for vehicles such as Chrysler LeBaron, Dodge Caravan, and Plymouth Voyager, where worn bushings can allow excess movement in the sway bar assembly. This part cross-references Mevotech Supreme MK7222 for the same application.
By restoring a tighter interface between the stabilizer bar and its mounting point, the K7222 helps maintain consistent suspension response on compatible Chrysler LeBaron, Dodge Spirit, and Plymouth Acclaim applications. The rubber material is selected for the listed OE-style fitment dimensions and the part is specified for 1-1/16 inch sway bar diameter applications.
What It Is Used For
- Front sway bar clunking or rattling from worn bushings
- Excess stabilizer bar movement at the frame or control arm mount
- Loose-feeling front suspension response during cornering
- Noise caused by hardened, cracked, or compressed rubber bushings
- Replacement on Chrysler, Dodge, and Plymouth front stabilizer bar service
Installation Notes and Tips
Verify the sway bar diameter before ordering; this part is specified for a 1.060 inch, or 1-1/16 inch, bar. Confirm whether your vehicle uses a front-to-frame or front-to-control-arm mounting location, since both positions appear in the listed fitment. Inspect the stabilizer bar and mounting surfaces for wear before installation, and note that hardware and dust boots are not included.
Quality Assurance
Moog is known in the chassis market for ongoing design improvements that extend product life and simplify replacement. The K7222 is listed as meeting or exceeding OE manufacturer specifications for the applications shown.
Compatible Vehicles
- Fits 1984-1995 Chrysler LeBaron, front to frame
- Fits 1989-1995 Dodge Spirit, front to frame
- Fits 1989-1995 Plymouth Acclaim, front to frame
- Fits 1987-1994 Dodge Shadow, front to frame
- Fits 1987-1994 Plymouth Sundance, front to frame
- Fits 1984-1993 Chrysler Daytona, front to frame
- Fits 1988-1993 Chrysler Dynasty, front to frame
- Fits 1990-1993 Chrysler Imperial, front to frame
- Fits 1984-1993 Chrysler New Yorker, front to frame
- Fits 1984-1993 Dodge Daytona, front to frame
- Fits 1990 Chrysler Town & Country, front to frame
- Fits 1985-1988 Chrysler Town & Country, front to frame
- Fits 1984-1990 Dodge Caravan, front to frame
- Fits 1987-1990 Dodge Grand Caravan, front to frame
- Fits 1987-1990 Plymouth Grand Voyager, front to frame
- Fits 1984-1990 Plymouth Voyager, front to frame
- Fits 1984-1989 Dodge Aries, front to frame
- Fits 1985-1989 Dodge Lancer, front to frame
- Fits 1984-1989 Plymouth Reliant, front to frame
- Fits 1984-1988 Dodge 600, front to frame
- Fits 1984-1987 Dodge Charger, front to frame
- Fits 1984-1987 Plymouth Turismo, front to frame
- Fits 1984-1986 Chrysler Laser, front to control arm
- Fits 1984-1986 Plymouth Turismo 2.2, front to frame
- Fits 1984 Dodge Rampage, front to frame
