Moog K80019 Suspension Stabilizer Bar Bushing Kit - Front To Frame
MOOG K80019 Sway Bar Bushing Kit
Restore stable front-end control with the MOOG K80019 suspension stabilizer bar bushing kit. Built with thermoplastic material and engineered to exceed OE manufacturer specs, this sway bar bushing is made for direct replacement service on select Ford Taurus and Mercury Sable applications.
For 1990 Ford Taurus front to frame and 1990 Mercury Sable front to frame applications with a 25 mm sway bar diameter, MOOG K80019 helps maintain proper bar location and consistent suspension response. This part number is a practical choice when searching for a 1990 Ford Taurus sway bar bushing or a 1990 Mercury Sable front stabilizer bar bushing replacement.
Key Features
- Thermoplastic construction for durable suspension service
- Bar diameter and inner diameter: 0.980 inch
- Outer diameter: 1.640 inch
- Length: 1.820 inch
- Meets and exceeds OE manufacturer specifications
- Designed as a front-to-frame sway bar bushing replacement
- Fits select 1990 Ford Taurus and 1990 Mercury Sable models
Detailed Description
The MOOG K80019 stabilizer bar bushing kit is engineered for the front suspension mounting point where the sway bar attaches to the frame. By replacing worn bushings, it helps keep the stabilizer bar centered and properly supported, which is important for predictable handling and reduced suspension movement. MOOG’s chassis-focused design approach emphasizes longer service life and easier replacement, making this part a solid OE-style solution for Taurus and Sable owners.
This part cross-references Mevotech Supreme MK80019 for the same application. Search terms such as MOOG K80019 sway bar bushing, front to frame stabilizer bar bushing, and 25 mm sway bar bushing for Ford Taurus and Mercury Sable can help narrow the correct replacement.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excess sway bar movement at the front frame mount
- Loose or inconsistent steering feel over bumps
- Suspension noise caused by deteriorated bushing material
- Loss of proper sway bar support on aging front suspension components
Installation Notes and Tips
Verify sway bar diameter before ordering; this part is specified for a 25 mm bar diameter. Inspect the stabilizer bar and mounting surfaces for wear, corrosion, or deformation before installation. Hardware and dust boots are not included, so reuse or replace related components as needed based on condition. Confirm the front-to-frame mounting location and vehicle application before service.
Quality Assurance
MOOG is known in the chassis category for ongoing design updates that improve part life and simplify replacement. K80019 is built to exceed OE manufacturer specs and is intended for direct-fit suspension service on the listed Ford Taurus and Mercury Sable applications.
Moog K80019 Suspension Stabilizer Bar Bushing Kit - Front To Frame
MOOG K80019 Sway Bar Bushing Kit
Restore stable front-end control with the MOOG K80019 suspension stabilizer bar bushing kit. Built with thermoplastic material and engineered to exceed OE manufacturer specs, this sway bar bushing is made for direct replacement service on select Ford Taurus and Mercury Sable applications.
For 1990 Ford Taurus front to frame and 1990 Mercury Sable front to frame applications with a 25 mm sway bar diameter, MOOG K80019 helps maintain proper bar location and consistent suspension response. This part number is a practical choice when searching for a 1990 Ford Taurus sway bar bushing or a 1990 Mercury Sable front stabilizer bar bushing replacement.
Key Features
- Thermoplastic construction for durable suspension service
- Bar diameter and inner diameter: 0.980 inch
- Outer diameter: 1.640 inch
- Length: 1.820 inch
- Meets and exceeds OE manufacturer specifications
- Designed as a front-to-frame sway bar bushing replacement
- Fits select 1990 Ford Taurus and 1990 Mercury Sable models
Detailed Description
The MOOG K80019 stabilizer bar bushing kit is engineered for the front suspension mounting point where the sway bar attaches to the frame. By replacing worn bushings, it helps keep the stabilizer bar centered and properly supported, which is important for predictable handling and reduced suspension movement. MOOG’s chassis-focused design approach emphasizes longer service life and easier replacement, making this part a solid OE-style solution for Taurus and Sable owners.
This part cross-references Mevotech Supreme MK80019 for the same application. Search terms such as MOOG K80019 sway bar bushing, front to frame stabilizer bar bushing, and 25 mm sway bar bushing for Ford Taurus and Mercury Sable can help narrow the correct replacement.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excess sway bar movement at the front frame mount
- Loose or inconsistent steering feel over bumps
- Suspension noise caused by deteriorated bushing material
- Loss of proper sway bar support on aging front suspension components
Installation Notes and Tips
Verify sway bar diameter before ordering; this part is specified for a 25 mm bar diameter. Inspect the stabilizer bar and mounting surfaces for wear, corrosion, or deformation before installation. Hardware and dust boots are not included, so reuse or replace related components as needed based on condition. Confirm the front-to-frame mounting location and vehicle application before service.
Quality Assurance
MOOG is known in the chassis category for ongoing design updates that improve part life and simplify replacement. K80019 is built to exceed OE manufacturer specs and is intended for direct-fit suspension service on the listed Ford Taurus and Mercury Sable applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
MOOG K80019 Sway Bar Bushing Kit
Restore stable front-end control with the MOOG K80019 suspension stabilizer bar bushing kit. Built with thermoplastic material and engineered to exceed OE manufacturer specs, this sway bar bushing is made for direct replacement service on select Ford Taurus and Mercury Sable applications.
For 1990 Ford Taurus front to frame and 1990 Mercury Sable front to frame applications with a 25 mm sway bar diameter, MOOG K80019 helps maintain proper bar location and consistent suspension response. This part number is a practical choice when searching for a 1990 Ford Taurus sway bar bushing or a 1990 Mercury Sable front stabilizer bar bushing replacement.
Key Features
- Thermoplastic construction for durable suspension service
- Bar diameter and inner diameter: 0.980 inch
- Outer diameter: 1.640 inch
- Length: 1.820 inch
- Meets and exceeds OE manufacturer specifications
- Designed as a front-to-frame sway bar bushing replacement
- Fits select 1990 Ford Taurus and 1990 Mercury Sable models
Detailed Description
The MOOG K80019 stabilizer bar bushing kit is engineered for the front suspension mounting point where the sway bar attaches to the frame. By replacing worn bushings, it helps keep the stabilizer bar centered and properly supported, which is important for predictable handling and reduced suspension movement. MOOG’s chassis-focused design approach emphasizes longer service life and easier replacement, making this part a solid OE-style solution for Taurus and Sable owners.
This part cross-references Mevotech Supreme MK80019 for the same application. Search terms such as MOOG K80019 sway bar bushing, front to frame stabilizer bar bushing, and 25 mm sway bar bushing for Ford Taurus and Mercury Sable can help narrow the correct replacement.
What It Helps Address
- Clunking or rattling from worn stabilizer bar bushings
- Excess sway bar movement at the front frame mount
- Loose or inconsistent steering feel over bumps
- Suspension noise caused by deteriorated bushing material
- Loss of proper sway bar support on aging front suspension components
Installation Notes and Tips
Verify sway bar diameter before ordering; this part is specified for a 25 mm bar diameter. Inspect the stabilizer bar and mounting surfaces for wear, corrosion, or deformation before installation. Hardware and dust boots are not included, so reuse or replace related components as needed based on condition. Confirm the front-to-frame mounting location and vehicle application before service.
Quality Assurance
MOOG is known in the chassis category for ongoing design updates that improve part life and simplify replacement. K80019 is built to exceed OE manufacturer specs and is intended for direct-fit suspension service on the listed Ford Taurus and Mercury Sable applications.
