Pioneer Cables DA-330 Engine Harmonic Balancer
OE Replacement Harmonic Balancer
Pioneer Cables DA-330 is an OE Replacement Balancer built for engine applications that require the correct harmonic balancer dimensions, belt alignment, and OE-style construction. It is a direct-fit style engine harmonic balancer for service work where precision and balance matter.
With a 1.375 in. inside diameter, 6.9375 in. outside diameter, 5.4375 in. depth, three pulley grooves, and three mounting holes, this balancer is built around the original design requirements. It uses standard replacement grade construction with high-grade metal and rubber components that are bonded or pressed to original specifications, then precision machined and dynamically balanced.
Key Features
- OE Replacement Balancer from Pioneer Cables
- Part number DA-330
- Inside diameter: 1.375 in. / 35 mm
- Outside diameter: 6.9375 in. / 176 mm
- Depth: 5.4375 in. / 137 mm
- Three pulley grooves for V-belt drive systems
- Three mounting holes
- Standard replacement grade construction
- Precision machined and dynamically balanced assembly
Product Line Details
The Pioneer Cables OE Replacement Balancer line focuses on original-equipment-style fit and function. For applications such as Ford Mustang and Ford F-150 service, this approach helps maintain the pulley geometry and rotational balance expected from the factory design. The DA-330 follows that OE replacement format for straightforward service installation.
Detailed Description
Pioneer Cables DA-330 harmonic balancer is engineered as an OE replacement alternative for engine rebuilds and repair jobs that call for the correct balancer profile. The bonded rubber and metal construction follows original specifications, while the machined surfaces and dynamic balancing support smooth operation in the engine’s front-end accessory drive. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For technicians and DIY buyers searching for a Ford Mustang harmonic balancer or Ford F-150 engine harmonic balancer, DA-330 provides the dimensional details needed to match the original setup. It is also a relevant search match for V-belt harmonic balancer replacement, OE style engine balancer, and standard replacement harmonic balancer applications.
Common Issues This Part Addresses
- Cracked or deteriorated harmonic balancer rubber
- Wobble or imbalance at the crankshaft pulley
- Belt tracking problems on V-belt drive systems
- Noise or vibration from a worn balancer assembly
- Incorrect pulley alignment after engine service
Installation Notes and Tips
Verify inside diameter, outside diameter, depth, pulley groove count, and mounting hole pattern before installation. Confirm the V-belt drive layout and compare the original balancer to the DA-330 to ensure proper alignment on the crankshaft snout. Use the vehicle service manual for torque and installation procedures, and inspect the front engine drive components for wear before completing the repair.
Quality Assurance
Pioneer Cables manufactures this harmonic balancer to OE design standards using high-grade materials, precision machining, and dynamic balancing for consistent fit and function. Part number DA-330 is built as a standard replacement component for engine service work where original-style dimensions are required.
Original: $387.19
-65%$387.19
$135.52Pioneer Cables DA-330 Engine Harmonic Balancer
OE Replacement Harmonic Balancer
Pioneer Cables DA-330 is an OE Replacement Balancer built for engine applications that require the correct harmonic balancer dimensions, belt alignment, and OE-style construction. It is a direct-fit style engine harmonic balancer for service work where precision and balance matter.
With a 1.375 in. inside diameter, 6.9375 in. outside diameter, 5.4375 in. depth, three pulley grooves, and three mounting holes, this balancer is built around the original design requirements. It uses standard replacement grade construction with high-grade metal and rubber components that are bonded or pressed to original specifications, then precision machined and dynamically balanced.
Key Features
- OE Replacement Balancer from Pioneer Cables
- Part number DA-330
- Inside diameter: 1.375 in. / 35 mm
- Outside diameter: 6.9375 in. / 176 mm
- Depth: 5.4375 in. / 137 mm
- Three pulley grooves for V-belt drive systems
- Three mounting holes
- Standard replacement grade construction
- Precision machined and dynamically balanced assembly
Product Line Details
The Pioneer Cables OE Replacement Balancer line focuses on original-equipment-style fit and function. For applications such as Ford Mustang and Ford F-150 service, this approach helps maintain the pulley geometry and rotational balance expected from the factory design. The DA-330 follows that OE replacement format for straightforward service installation.
Detailed Description
Pioneer Cables DA-330 harmonic balancer is engineered as an OE replacement alternative for engine rebuilds and repair jobs that call for the correct balancer profile. The bonded rubber and metal construction follows original specifications, while the machined surfaces and dynamic balancing support smooth operation in the engine’s front-end accessory drive. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For technicians and DIY buyers searching for a Ford Mustang harmonic balancer or Ford F-150 engine harmonic balancer, DA-330 provides the dimensional details needed to match the original setup. It is also a relevant search match for V-belt harmonic balancer replacement, OE style engine balancer, and standard replacement harmonic balancer applications.
Common Issues This Part Addresses
- Cracked or deteriorated harmonic balancer rubber
- Wobble or imbalance at the crankshaft pulley
- Belt tracking problems on V-belt drive systems
- Noise or vibration from a worn balancer assembly
- Incorrect pulley alignment after engine service
Installation Notes and Tips
Verify inside diameter, outside diameter, depth, pulley groove count, and mounting hole pattern before installation. Confirm the V-belt drive layout and compare the original balancer to the DA-330 to ensure proper alignment on the crankshaft snout. Use the vehicle service manual for torque and installation procedures, and inspect the front engine drive components for wear before completing the repair.
Quality Assurance
Pioneer Cables manufactures this harmonic balancer to OE design standards using high-grade materials, precision machining, and dynamic balancing for consistent fit and function. Part number DA-330 is built as a standard replacement component for engine service work where original-style dimensions are required.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE Replacement Harmonic Balancer
Pioneer Cables DA-330 is an OE Replacement Balancer built for engine applications that require the correct harmonic balancer dimensions, belt alignment, and OE-style construction. It is a direct-fit style engine harmonic balancer for service work where precision and balance matter.
With a 1.375 in. inside diameter, 6.9375 in. outside diameter, 5.4375 in. depth, three pulley grooves, and three mounting holes, this balancer is built around the original design requirements. It uses standard replacement grade construction with high-grade metal and rubber components that are bonded or pressed to original specifications, then precision machined and dynamically balanced.
Key Features
- OE Replacement Balancer from Pioneer Cables
- Part number DA-330
- Inside diameter: 1.375 in. / 35 mm
- Outside diameter: 6.9375 in. / 176 mm
- Depth: 5.4375 in. / 137 mm
- Three pulley grooves for V-belt drive systems
- Three mounting holes
- Standard replacement grade construction
- Precision machined and dynamically balanced assembly
Product Line Details
The Pioneer Cables OE Replacement Balancer line focuses on original-equipment-style fit and function. For applications such as Ford Mustang and Ford F-150 service, this approach helps maintain the pulley geometry and rotational balance expected from the factory design. The DA-330 follows that OE replacement format for straightforward service installation.
Detailed Description
Pioneer Cables DA-330 harmonic balancer is engineered as an OE replacement alternative for engine rebuilds and repair jobs that call for the correct balancer profile. The bonded rubber and metal construction follows original specifications, while the machined surfaces and dynamic balancing support smooth operation in the engine’s front-end accessory drive. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
For technicians and DIY buyers searching for a Ford Mustang harmonic balancer or Ford F-150 engine harmonic balancer, DA-330 provides the dimensional details needed to match the original setup. It is also a relevant search match for V-belt harmonic balancer replacement, OE style engine balancer, and standard replacement harmonic balancer applications.
Common Issues This Part Addresses
- Cracked or deteriorated harmonic balancer rubber
- Wobble or imbalance at the crankshaft pulley
- Belt tracking problems on V-belt drive systems
- Noise or vibration from a worn balancer assembly
- Incorrect pulley alignment after engine service
Installation Notes and Tips
Verify inside diameter, outside diameter, depth, pulley groove count, and mounting hole pattern before installation. Confirm the V-belt drive layout and compare the original balancer to the DA-330 to ensure proper alignment on the crankshaft snout. Use the vehicle service manual for torque and installation procedures, and inspect the front engine drive components for wear before completing the repair.
Quality Assurance
Pioneer Cables manufactures this harmonic balancer to OE design standards using high-grade materials, precision machining, and dynamic balancing for consistent fit and function. Part number DA-330 is built as a standard replacement component for engine service work where original-style dimensions are required.
