Pioneer Cables DA-3955 Engine Harmonic Balancer
OE Replacement Harmonic Balancer
Pioneer Cables DA-3955 is an OE Replacement Balancer built for engines that use a serpentine drive belt. It is developed to OE design dimensions so it installs correctly and functions as intended on a wide range of Chevrolet and GMC trucks, vans, and SUVs.
With precision-machined components, bonded or pressed high-grade rubber, and dynamic balancing, this harmonic balancer is built to help maintain smooth engine operation and belt drive stability. The Pioneer Cables OE Replacement Balancer line focuses on direct-fit service parts for applications such as Chevrolet C2500, GMC K1500, and Chevrolet Tahoe.
- OE-style harmonic balancer for serpentine belt applications
- Inside diameter: 2.0625 in. / 52 mm
- Outside diameter: 7.8125 in. / 198 mm
- Depth: 2.5625 in. / 65 mm
- 4 pulley grooves and 4 mounting holes
- Standard replacement grade
- Precision machined and dynamically balanced
- High-grade metal and rubber construction
- Bolt and washer not included
Detailed Product Overview
The Pioneer Cables DA-3955 harmonic balancer is engineered as an OE replacement for engines that rely on a serpentine belt system. Its dimensions, groove count, and mounting pattern are matched to original specifications to support proper alignment and fitment. This part cross-references Standard Ignition PC1051 for the same application.
Compatible With 1988-2000 Chevrolet C2500, 1988-2000 Chevrolet C3500, 1988-2000 Chevrolet K2500, 1988-2000 Chevrolet K3500, 1988-2000 GMC C2500, 1988-2000 GMC C3500, 1988-2000 GMC K2500, and 1988-2000 GMC K3500. It also fits 1995-1999 Chevrolet Tahoe, 1994-1999 GMC C2500 Suburban, and 1994-1997 GMC Yukon in listed serpentine applications.
Common Problems This Part Addresses
- Engine vibration caused by a worn or separated balancer
- Serpentine belt tracking issues from pulley wear or misalignment
- Cracked rubber isolator material in the harmonic balancer
- Noise from an out-of-balance or damaged front engine accessory drive
- Fitment problems when replacing an OE-style balancer with the correct dimensions
Installation Notes and Tips
Verify the engine uses a serpentine belt setup and confirm the outside diameter, inside diameter, depth, groove count, and mounting hole pattern before installation. This part does not include a bolt and washer. Use the vehicle’s original service specifications and inspect the crankshaft snout, pulley alignment, and belt condition during replacement.
Quality Assurance
Pioneer Cables develops this OE Replacement Balancer to original design standards using precision-machined components and dynamically balanced assemblies for consistent operation. The construction uses high-grade metals and bonded or pressed rubber to match the intended OE-style fit and function.
Original: $166.38
-65%$166.38
$58.23Pioneer Cables DA-3955 Engine Harmonic Balancer
OE Replacement Harmonic Balancer
Pioneer Cables DA-3955 is an OE Replacement Balancer built for engines that use a serpentine drive belt. It is developed to OE design dimensions so it installs correctly and functions as intended on a wide range of Chevrolet and GMC trucks, vans, and SUVs.
With precision-machined components, bonded or pressed high-grade rubber, and dynamic balancing, this harmonic balancer is built to help maintain smooth engine operation and belt drive stability. The Pioneer Cables OE Replacement Balancer line focuses on direct-fit service parts for applications such as Chevrolet C2500, GMC K1500, and Chevrolet Tahoe.
- OE-style harmonic balancer for serpentine belt applications
- Inside diameter: 2.0625 in. / 52 mm
- Outside diameter: 7.8125 in. / 198 mm
- Depth: 2.5625 in. / 65 mm
- 4 pulley grooves and 4 mounting holes
- Standard replacement grade
- Precision machined and dynamically balanced
- High-grade metal and rubber construction
- Bolt and washer not included
Detailed Product Overview
The Pioneer Cables DA-3955 harmonic balancer is engineered as an OE replacement for engines that rely on a serpentine belt system. Its dimensions, groove count, and mounting pattern are matched to original specifications to support proper alignment and fitment. This part cross-references Standard Ignition PC1051 for the same application.
Compatible With 1988-2000 Chevrolet C2500, 1988-2000 Chevrolet C3500, 1988-2000 Chevrolet K2500, 1988-2000 Chevrolet K3500, 1988-2000 GMC C2500, 1988-2000 GMC C3500, 1988-2000 GMC K2500, and 1988-2000 GMC K3500. It also fits 1995-1999 Chevrolet Tahoe, 1994-1999 GMC C2500 Suburban, and 1994-1997 GMC Yukon in listed serpentine applications.
Common Problems This Part Addresses
- Engine vibration caused by a worn or separated balancer
- Serpentine belt tracking issues from pulley wear or misalignment
- Cracked rubber isolator material in the harmonic balancer
- Noise from an out-of-balance or damaged front engine accessory drive
- Fitment problems when replacing an OE-style balancer with the correct dimensions
Installation Notes and Tips
Verify the engine uses a serpentine belt setup and confirm the outside diameter, inside diameter, depth, groove count, and mounting hole pattern before installation. This part does not include a bolt and washer. Use the vehicle’s original service specifications and inspect the crankshaft snout, pulley alignment, and belt condition during replacement.
Quality Assurance
Pioneer Cables develops this OE Replacement Balancer to original design standards using precision-machined components and dynamically balanced assemblies for consistent operation. The construction uses high-grade metals and bonded or pressed rubber to match the intended OE-style fit and function.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE Replacement Harmonic Balancer
Pioneer Cables DA-3955 is an OE Replacement Balancer built for engines that use a serpentine drive belt. It is developed to OE design dimensions so it installs correctly and functions as intended on a wide range of Chevrolet and GMC trucks, vans, and SUVs.
With precision-machined components, bonded or pressed high-grade rubber, and dynamic balancing, this harmonic balancer is built to help maintain smooth engine operation and belt drive stability. The Pioneer Cables OE Replacement Balancer line focuses on direct-fit service parts for applications such as Chevrolet C2500, GMC K1500, and Chevrolet Tahoe.
- OE-style harmonic balancer for serpentine belt applications
- Inside diameter: 2.0625 in. / 52 mm
- Outside diameter: 7.8125 in. / 198 mm
- Depth: 2.5625 in. / 65 mm
- 4 pulley grooves and 4 mounting holes
- Standard replacement grade
- Precision machined and dynamically balanced
- High-grade metal and rubber construction
- Bolt and washer not included
Detailed Product Overview
The Pioneer Cables DA-3955 harmonic balancer is engineered as an OE replacement for engines that rely on a serpentine belt system. Its dimensions, groove count, and mounting pattern are matched to original specifications to support proper alignment and fitment. This part cross-references Standard Ignition PC1051 for the same application.
Compatible With 1988-2000 Chevrolet C2500, 1988-2000 Chevrolet C3500, 1988-2000 Chevrolet K2500, 1988-2000 Chevrolet K3500, 1988-2000 GMC C2500, 1988-2000 GMC C3500, 1988-2000 GMC K2500, and 1988-2000 GMC K3500. It also fits 1995-1999 Chevrolet Tahoe, 1994-1999 GMC C2500 Suburban, and 1994-1997 GMC Yukon in listed serpentine applications.
Common Problems This Part Addresses
- Engine vibration caused by a worn or separated balancer
- Serpentine belt tracking issues from pulley wear or misalignment
- Cracked rubber isolator material in the harmonic balancer
- Noise from an out-of-balance or damaged front engine accessory drive
- Fitment problems when replacing an OE-style balancer with the correct dimensions
Installation Notes and Tips
Verify the engine uses a serpentine belt setup and confirm the outside diameter, inside diameter, depth, groove count, and mounting hole pattern before installation. This part does not include a bolt and washer. Use the vehicle’s original service specifications and inspect the crankshaft snout, pulley alignment, and belt condition during replacement.
Quality Assurance
Pioneer Cables develops this OE Replacement Balancer to original design standards using precision-machined components and dynamically balanced assemblies for consistent operation. The construction uses high-grade metals and bonded or pressed rubber to match the intended OE-style fit and function.
