Premium Guard PG5401 Engine Oil Filter
Engine Oil Filter for Audi and Volkswagen
Premium Guard PG5401 is a spin-on engine oil filter built for select Audi and Volkswagen applications from 1995 through 2006. It uses enhanced cellulose filter media, a 15–25 micron rating, and an anti-drain back valve to support clean oil flow and consistent start-up protection.
Key Features
- Enhanced cellulose filter media for dependable contaminant capture
- Spin-on design with 3/4"-16 UNF inside thread size
- Anti-drain back valve helps retain oil in the filter after shutdown
- Bypass relief valve set at 23–28 psi for controlled oil flow
- Micron rating of 15–25 for fine particle filtration
- Flow rate rated at 20 L/min with 290 burst pressure
- NBR gasket material with 0.20 in gasket thickness
- Filter height: 3.66 in; outer diameter: 3.66 in
Product Details
The Premium Guard Standard Life line focuses on routine service filtration for everyday engine maintenance. PG5401 is a direct-fit engine oil filter for many Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, S4, RS4, Cabriolet, and Volkswagen Passat applications. It is also cross-referenced to Baldwin B1429 and FEL-PRO 61355 for the same application. Use PG5401 when servicing vehicles that call for a spin-on oil filter with this thread size, gasket profile, and bypass setting.
What This Oil Filter Helps Address
- Engine oil contamination from normal wear particles
- Oil drain-back after shutdown that can delay lubrication on start-up
- Restricted oil flow caused by a loaded filter element
- Pressure spikes that require a bypass relief valve
- Routine maintenance needs on Audi and Volkswagen oil service intervals
Installation Notes and Tips
Verify the thread size, gasket dimensions, and filter height against the original filter before installation. Replace the filter during each oil service, lubricate the gasket before tightening, and follow the vehicle manufacturer’s torque procedure. Confirm the application on 1995-2006 Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, S4, RS4, Cabriolet, and 1998-2005 Volkswagen Passat models, including the 2001 Passat with oil cooler notes where listed.
Quality Assurance
Premium Guard PG5401 is built to published dimensional and performance specifications for Standard Life service use. The listed construction details, including enhanced cellulose media, anti-drain back valve, bypass valve, and NBR gasket, support consistent filtration performance across the confirmed fitment range.
Original: $12.32
-65%$12.32
$4.31Premium Guard PG5401 Engine Oil Filter
Engine Oil Filter for Audi and Volkswagen
Premium Guard PG5401 is a spin-on engine oil filter built for select Audi and Volkswagen applications from 1995 through 2006. It uses enhanced cellulose filter media, a 15–25 micron rating, and an anti-drain back valve to support clean oil flow and consistent start-up protection.
Key Features
- Enhanced cellulose filter media for dependable contaminant capture
- Spin-on design with 3/4"-16 UNF inside thread size
- Anti-drain back valve helps retain oil in the filter after shutdown
- Bypass relief valve set at 23–28 psi for controlled oil flow
- Micron rating of 15–25 for fine particle filtration
- Flow rate rated at 20 L/min with 290 burst pressure
- NBR gasket material with 0.20 in gasket thickness
- Filter height: 3.66 in; outer diameter: 3.66 in
Product Details
The Premium Guard Standard Life line focuses on routine service filtration for everyday engine maintenance. PG5401 is a direct-fit engine oil filter for many Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, S4, RS4, Cabriolet, and Volkswagen Passat applications. It is also cross-referenced to Baldwin B1429 and FEL-PRO 61355 for the same application. Use PG5401 when servicing vehicles that call for a spin-on oil filter with this thread size, gasket profile, and bypass setting.
What This Oil Filter Helps Address
- Engine oil contamination from normal wear particles
- Oil drain-back after shutdown that can delay lubrication on start-up
- Restricted oil flow caused by a loaded filter element
- Pressure spikes that require a bypass relief valve
- Routine maintenance needs on Audi and Volkswagen oil service intervals
Installation Notes and Tips
Verify the thread size, gasket dimensions, and filter height against the original filter before installation. Replace the filter during each oil service, lubricate the gasket before tightening, and follow the vehicle manufacturer’s torque procedure. Confirm the application on 1995-2006 Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, S4, RS4, Cabriolet, and 1998-2005 Volkswagen Passat models, including the 2001 Passat with oil cooler notes where listed.
Quality Assurance
Premium Guard PG5401 is built to published dimensional and performance specifications for Standard Life service use. The listed construction details, including enhanced cellulose media, anti-drain back valve, bypass valve, and NBR gasket, support consistent filtration performance across the confirmed fitment range.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engine Oil Filter for Audi and Volkswagen
Premium Guard PG5401 is a spin-on engine oil filter built for select Audi and Volkswagen applications from 1995 through 2006. It uses enhanced cellulose filter media, a 15–25 micron rating, and an anti-drain back valve to support clean oil flow and consistent start-up protection.
Key Features
- Enhanced cellulose filter media for dependable contaminant capture
- Spin-on design with 3/4"-16 UNF inside thread size
- Anti-drain back valve helps retain oil in the filter after shutdown
- Bypass relief valve set at 23–28 psi for controlled oil flow
- Micron rating of 15–25 for fine particle filtration
- Flow rate rated at 20 L/min with 290 burst pressure
- NBR gasket material with 0.20 in gasket thickness
- Filter height: 3.66 in; outer diameter: 3.66 in
Product Details
The Premium Guard Standard Life line focuses on routine service filtration for everyday engine maintenance. PG5401 is a direct-fit engine oil filter for many Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, S4, RS4, Cabriolet, and Volkswagen Passat applications. It is also cross-referenced to Baldwin B1429 and FEL-PRO 61355 for the same application. Use PG5401 when servicing vehicles that call for a spin-on oil filter with this thread size, gasket profile, and bypass setting.
What This Oil Filter Helps Address
- Engine oil contamination from normal wear particles
- Oil drain-back after shutdown that can delay lubrication on start-up
- Restricted oil flow caused by a loaded filter element
- Pressure spikes that require a bypass relief valve
- Routine maintenance needs on Audi and Volkswagen oil service intervals
Installation Notes and Tips
Verify the thread size, gasket dimensions, and filter height against the original filter before installation. Replace the filter during each oil service, lubricate the gasket before tightening, and follow the vehicle manufacturer’s torque procedure. Confirm the application on 1995-2006 Audi A4, A4 Quattro, A6, A6 Quattro, Allroad Quattro, S4, RS4, Cabriolet, and 1998-2005 Volkswagen Passat models, including the 2001 Passat with oil cooler notes where listed.
Quality Assurance
Premium Guard PG5401 is built to published dimensional and performance specifications for Standard Life service use. The listed construction details, including enhanced cellulose media, anti-drain back valve, bypass valve, and NBR gasket, support consistent filtration performance across the confirmed fitment range.
