Suspensia X32BJ0441 Suspension Ball Joint - Front Lower
Suspension Ball Joint for Mazda 3
Restore precise front-end geometry with this Suspensia suspension ball joint, part number X32BJ0441. It is built for direct OE fit and OE look, with forged steel construction, a steel housing, and a pre-greased design for dependable service on the road.
Compatible with 2019-2025 Mazda 3 front lower applications, this ball joint is engineered for a press-in installation and uses a pinch-style ball joint stud with a knurled stud type. The rubber dust boot helps protect the joint from contamination, while the non-greaseable design supports low-maintenance operation.
Key Features
- Fits 2019-2025 Mazda 3, front lower
- Suspensia part number X32BJ0441
- Forged steel construction with steel housing
- Pre-greased for initial installation
- Rubber dust boot included
- Press-in mounting type with press-on attachment method
- Pinch-style ball joint stud with knurled stud type
- Non-adjustable, non-greaseable design
Detailed Description
The Suspensia X32BJ0441 suspension ball joint is designed for the front lower position on the Mazda 3 from 2019 through 2025. It is manufactured to OE fit and OE appearance standards, making it a direct replacement for worn or damaged chassis components. The forged steel body, rubber boot, and pre-greased internal design support consistent steering and suspension articulation under normal driving conditions.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. If you are searching for a front lower ball joint for Mazda 3 2019-2025 or a replacement suspension ball joint for Mazda 3 front lower service, X32BJ0441 is the matching part number to verify.
What It Helps Address
- Front suspension looseness or play
- Clunking or knocking from the front lower suspension area
- Uneven tire wear caused by worn ball joint movement
- Steering wander or reduced front-end stability
- Restoration of proper suspension articulation on Mazda 3 models
Installation Notes and Tips
This ball joint uses a press-in mounting type and press-on attachment method, so proper service tools are required for installation. Confirm the front lower position and verify part number X32BJ0441 against the vehicle before pressing the component into place. Inspect the surrounding control arm and related hardware for wear during service, and follow the vehicle manufacturer’s torque and alignment procedures after installation.
Quality Assurance
Suspensia manufactures chassis parts in a fully automated OE-focused facility in Turkiye and supplies components built to OE or better quality standards. The production environment is certified to IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018, supporting controlled manufacturing and consistent part quality for the Mazda 3 front lower suspension application.
Original: $22.70
-65%$22.70
$7.94Suspensia X32BJ0441 Suspension Ball Joint - Front Lower
Suspension Ball Joint for Mazda 3
Restore precise front-end geometry with this Suspensia suspension ball joint, part number X32BJ0441. It is built for direct OE fit and OE look, with forged steel construction, a steel housing, and a pre-greased design for dependable service on the road.
Compatible with 2019-2025 Mazda 3 front lower applications, this ball joint is engineered for a press-in installation and uses a pinch-style ball joint stud with a knurled stud type. The rubber dust boot helps protect the joint from contamination, while the non-greaseable design supports low-maintenance operation.
Key Features
- Fits 2019-2025 Mazda 3, front lower
- Suspensia part number X32BJ0441
- Forged steel construction with steel housing
- Pre-greased for initial installation
- Rubber dust boot included
- Press-in mounting type with press-on attachment method
- Pinch-style ball joint stud with knurled stud type
- Non-adjustable, non-greaseable design
Detailed Description
The Suspensia X32BJ0441 suspension ball joint is designed for the front lower position on the Mazda 3 from 2019 through 2025. It is manufactured to OE fit and OE appearance standards, making it a direct replacement for worn or damaged chassis components. The forged steel body, rubber boot, and pre-greased internal design support consistent steering and suspension articulation under normal driving conditions.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. If you are searching for a front lower ball joint for Mazda 3 2019-2025 or a replacement suspension ball joint for Mazda 3 front lower service, X32BJ0441 is the matching part number to verify.
What It Helps Address
- Front suspension looseness or play
- Clunking or knocking from the front lower suspension area
- Uneven tire wear caused by worn ball joint movement
- Steering wander or reduced front-end stability
- Restoration of proper suspension articulation on Mazda 3 models
Installation Notes and Tips
This ball joint uses a press-in mounting type and press-on attachment method, so proper service tools are required for installation. Confirm the front lower position and verify part number X32BJ0441 against the vehicle before pressing the component into place. Inspect the surrounding control arm and related hardware for wear during service, and follow the vehicle manufacturer’s torque and alignment procedures after installation.
Quality Assurance
Suspensia manufactures chassis parts in a fully automated OE-focused facility in Turkiye and supplies components built to OE or better quality standards. The production environment is certified to IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018, supporting controlled manufacturing and consistent part quality for the Mazda 3 front lower suspension application.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Suspension Ball Joint for Mazda 3
Restore precise front-end geometry with this Suspensia suspension ball joint, part number X32BJ0441. It is built for direct OE fit and OE look, with forged steel construction, a steel housing, and a pre-greased design for dependable service on the road.
Compatible with 2019-2025 Mazda 3 front lower applications, this ball joint is engineered for a press-in installation and uses a pinch-style ball joint stud with a knurled stud type. The rubber dust boot helps protect the joint from contamination, while the non-greaseable design supports low-maintenance operation.
Key Features
- Fits 2019-2025 Mazda 3, front lower
- Suspensia part number X32BJ0441
- Forged steel construction with steel housing
- Pre-greased for initial installation
- Rubber dust boot included
- Press-in mounting type with press-on attachment method
- Pinch-style ball joint stud with knurled stud type
- Non-adjustable, non-greaseable design
Detailed Description
The Suspensia X32BJ0441 suspension ball joint is designed for the front lower position on the Mazda 3 from 2019 through 2025. It is manufactured to OE fit and OE appearance standards, making it a direct replacement for worn or damaged chassis components. The forged steel body, rubber boot, and pre-greased internal design support consistent steering and suspension articulation under normal driving conditions.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. If you are searching for a front lower ball joint for Mazda 3 2019-2025 or a replacement suspension ball joint for Mazda 3 front lower service, X32BJ0441 is the matching part number to verify.
What It Helps Address
- Front suspension looseness or play
- Clunking or knocking from the front lower suspension area
- Uneven tire wear caused by worn ball joint movement
- Steering wander or reduced front-end stability
- Restoration of proper suspension articulation on Mazda 3 models
Installation Notes and Tips
This ball joint uses a press-in mounting type and press-on attachment method, so proper service tools are required for installation. Confirm the front lower position and verify part number X32BJ0441 against the vehicle before pressing the component into place. Inspect the surrounding control arm and related hardware for wear during service, and follow the vehicle manufacturer’s torque and alignment procedures after installation.
Quality Assurance
Suspensia manufactures chassis parts in a fully automated OE-focused facility in Turkiye and supplies components built to OE or better quality standards. The production environment is certified to IATF 16949:2016, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and ISO 50001:2018, supporting controlled manufacturing and consistent part quality for the Mazda 3 front lower suspension application.
