Suspensia X50CJ0972 Suspension Control Arm and Ball Joint Assembly - Front Right Lower
Suspension Control Arm for Tacoma Front Right Lower
Restore precise front suspension geometry with this Suspensia suspension control arm and ball joint assembly, part number X50CJ0972. It is built for 2005-2015 Toyota Tacoma front right lower applications and uses a steel housing with a pre-greased, press-in ball joint for direct replacement service.
Suspensia is manufactured in Turkey in IATF16949 certified factories and is backed by ISC Industries’ OE supply experience with major global vehicle programs. This assembly is a practical choice for Tacoma front suspension repair where ball joint wear, bushing deterioration, or looseness has affected steering feel and alignment.
Key Features
- Fits 2005-2015 Toyota Tacoma, front right lower
- Suspension control arm and ball joint assembly
- Steel arm and steel housing construction
- Pre-greased with a press-in ball joint
- Ball joint included with dust boot, cotter pin, and castle nut
- Rubber bushing and rubber dust boot with black finish
- Threaded ball joint stud with M16 x 1.5 thread size
- Cross-references MOOG Chassis Products RK641521 and Mevotech Original Grade GS861043
- Part number X50CJ0972
Detailed Description
This front right lower control arm assembly is engineered for Toyota Tacoma suspension service where the original arm, bushing, or ball joint has worn beyond specification. The steel construction provides a rigid mounting structure, while the rubber bushing and plastic bearing material support controlled suspension movement. The ball joint is pre-greased and uses a press-in mounting type with a threaded stud, helping simplify replacement of the complete assembly rather than servicing individual wear components. Part number X50CJ0972 is also referenced against OE-style applications used by other aftermarket catalogs for the same Tacoma fitment.
Common Repair Uses
- Front-end clunking or looseness from a worn ball joint
- Uneven tire wear caused by suspension geometry changes
- Steering wander or reduced road feel on Tacoma front suspension
- Cracked or deteriorated lower control arm bushings
- Replacement after inspection failure or excessive play in the front right lower arm
Installation Notes and Tips
Install on the front right lower position only for the listed Tacoma applications. Because this assembly uses a press-in ball joint and threaded stud design, verify fastener torque and alignment settings after installation. A professional wheel alignment is recommended any time a lower control arm is replaced. Confirm fitment by year, make, model, and position before ordering, and compare the original part number X50CJ0972 to the removed component.
Quality Assurance
Suspensia parts are manufactured in Turkey in IATF16949 certified factories, with production supported by ISC Industries’ OE supply background for Ford, Fiat/Chrysler, Volkswagen Group, and Renault/Nissan programs. That manufacturing standard supports consistent fit and material control for Tacoma suspension repair.
Original: $143.44
-65%$143.44
$50.20Suspensia X50CJ0972 Suspension Control Arm and Ball Joint Assembly - Front Right Lower
Suspension Control Arm for Tacoma Front Right Lower
Restore precise front suspension geometry with this Suspensia suspension control arm and ball joint assembly, part number X50CJ0972. It is built for 2005-2015 Toyota Tacoma front right lower applications and uses a steel housing with a pre-greased, press-in ball joint for direct replacement service.
Suspensia is manufactured in Turkey in IATF16949 certified factories and is backed by ISC Industries’ OE supply experience with major global vehicle programs. This assembly is a practical choice for Tacoma front suspension repair where ball joint wear, bushing deterioration, or looseness has affected steering feel and alignment.
Key Features
- Fits 2005-2015 Toyota Tacoma, front right lower
- Suspension control arm and ball joint assembly
- Steel arm and steel housing construction
- Pre-greased with a press-in ball joint
- Ball joint included with dust boot, cotter pin, and castle nut
- Rubber bushing and rubber dust boot with black finish
- Threaded ball joint stud with M16 x 1.5 thread size
- Cross-references MOOG Chassis Products RK641521 and Mevotech Original Grade GS861043
- Part number X50CJ0972
Detailed Description
This front right lower control arm assembly is engineered for Toyota Tacoma suspension service where the original arm, bushing, or ball joint has worn beyond specification. The steel construction provides a rigid mounting structure, while the rubber bushing and plastic bearing material support controlled suspension movement. The ball joint is pre-greased and uses a press-in mounting type with a threaded stud, helping simplify replacement of the complete assembly rather than servicing individual wear components. Part number X50CJ0972 is also referenced against OE-style applications used by other aftermarket catalogs for the same Tacoma fitment.
Common Repair Uses
- Front-end clunking or looseness from a worn ball joint
- Uneven tire wear caused by suspension geometry changes
- Steering wander or reduced road feel on Tacoma front suspension
- Cracked or deteriorated lower control arm bushings
- Replacement after inspection failure or excessive play in the front right lower arm
Installation Notes and Tips
Install on the front right lower position only for the listed Tacoma applications. Because this assembly uses a press-in ball joint and threaded stud design, verify fastener torque and alignment settings after installation. A professional wheel alignment is recommended any time a lower control arm is replaced. Confirm fitment by year, make, model, and position before ordering, and compare the original part number X50CJ0972 to the removed component.
Quality Assurance
Suspensia parts are manufactured in Turkey in IATF16949 certified factories, with production supported by ISC Industries’ OE supply background for Ford, Fiat/Chrysler, Volkswagen Group, and Renault/Nissan programs. That manufacturing standard supports consistent fit and material control for Tacoma suspension repair.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Suspension Control Arm for Tacoma Front Right Lower
Restore precise front suspension geometry with this Suspensia suspension control arm and ball joint assembly, part number X50CJ0972. It is built for 2005-2015 Toyota Tacoma front right lower applications and uses a steel housing with a pre-greased, press-in ball joint for direct replacement service.
Suspensia is manufactured in Turkey in IATF16949 certified factories and is backed by ISC Industries’ OE supply experience with major global vehicle programs. This assembly is a practical choice for Tacoma front suspension repair where ball joint wear, bushing deterioration, or looseness has affected steering feel and alignment.
Key Features
- Fits 2005-2015 Toyota Tacoma, front right lower
- Suspension control arm and ball joint assembly
- Steel arm and steel housing construction
- Pre-greased with a press-in ball joint
- Ball joint included with dust boot, cotter pin, and castle nut
- Rubber bushing and rubber dust boot with black finish
- Threaded ball joint stud with M16 x 1.5 thread size
- Cross-references MOOG Chassis Products RK641521 and Mevotech Original Grade GS861043
- Part number X50CJ0972
Detailed Description
This front right lower control arm assembly is engineered for Toyota Tacoma suspension service where the original arm, bushing, or ball joint has worn beyond specification. The steel construction provides a rigid mounting structure, while the rubber bushing and plastic bearing material support controlled suspension movement. The ball joint is pre-greased and uses a press-in mounting type with a threaded stud, helping simplify replacement of the complete assembly rather than servicing individual wear components. Part number X50CJ0972 is also referenced against OE-style applications used by other aftermarket catalogs for the same Tacoma fitment.
Common Repair Uses
- Front-end clunking or looseness from a worn ball joint
- Uneven tire wear caused by suspension geometry changes
- Steering wander or reduced road feel on Tacoma front suspension
- Cracked or deteriorated lower control arm bushings
- Replacement after inspection failure or excessive play in the front right lower arm
Installation Notes and Tips
Install on the front right lower position only for the listed Tacoma applications. Because this assembly uses a press-in ball joint and threaded stud design, verify fastener torque and alignment settings after installation. A professional wheel alignment is recommended any time a lower control arm is replaced. Confirm fitment by year, make, model, and position before ordering, and compare the original part number X50CJ0972 to the removed component.
Quality Assurance
Suspensia parts are manufactured in Turkey in IATF16949 certified factories, with production supported by ISC Industries’ OE supply background for Ford, Fiat/Chrysler, Volkswagen Group, and Renault/Nissan programs. That manufacturing standard supports consistent fit and material control for Tacoma suspension repair.
