Walker 255-1080 Fuel Injection Pressure Regulator
Fuel Pressure Control for OE-Style Performance
Walker 255-1080 is a standard replacement fuel injection pressure regulator built to maintain correct fuel pressure in the fuel rail. It supports proper injector delivery for smooth cold starts, stable idle quality, and consistent throttle response on select Ford applications.
Compatible With 1995-1996 Ford E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline, E-350 Econoline, E-350 Econoline Club Wagon, F-150, and F-250 applications. This part cross-references OE-style service needs for the same application.
Key Features
- Walker 255-1080 fuel injection pressure regulator
- Steel construction for durability in engine bay conditions
- Standard replacement grade for direct service use
- Non-adjustable design for factory-style fuel pressure control
- 1 inlet, 1 outlet, and 2-port flange mounting layout
- No gauge port for a clean OE-style configuration
- Corrosion-resistant components for fuel system exposure
Detailed Description
The Walker Products fuel injection pressure regulator is engineered to keep fuel pressure within the fuel rail at the correct level so the injectors receive fuel consistently across operating conditions. By matching OE specifications for fit, pressure range, and fuel flow, Walker 255-1080 supports factory-style drivability and straightforward replacement on 1995-1996 Ford E-Series vans and Ford F-150 and F-250 trucks. The direct-fit flange mount helps simplify installation on the original fuel system layout.
Walker 255-1080 is a practical choice when servicing a Ford E-150 Econoline, E-250 Econoline, or F-150 that needs stable fuel pressure control without an adjustable regulator. The steel body and corrosion-resistant construction are suited to the demands of fuel system service and underhood operation.
Common Issues This Part Can Address
- Hard starting, especially during cold starts
- Rough or unstable idle
- Hesitation during throttle input
- Poor fuel economy caused by incorrect fuel pressure
- Fuel delivery inconsistency at the injectors
Installation Notes and Tips
Verify the stamped OE reference on the existing unit before installation, especially on 1995-1996 Ford E-150 Econoline, E-250 Econoline, E-350 Econoline, and related Club Wagon applications marked F5TE9C968BA. Confirm the flange mounting style, inlet and outlet orientation, and fuel rail connection points before removal. Because mounting hardware is not included, reuse or source the correct hardware as needed for the vehicle.
After installation, inspect for fuel leaks and confirm stable idle and throttle response. For best results, replace any damaged seals or related fuel system components during service.
Quality Assurance
Walker Products designs this regulator to OE specifications for fit and fuel pressure control, with corrosion-resistant materials selected for fuel system durability. Part number 255-1080 is built as a direct replacement for factory-style service on the listed Ford applications.
Walker 255-1080 Fuel Injection Pressure Regulator
Fuel Pressure Control for OE-Style Performance
Walker 255-1080 is a standard replacement fuel injection pressure regulator built to maintain correct fuel pressure in the fuel rail. It supports proper injector delivery for smooth cold starts, stable idle quality, and consistent throttle response on select Ford applications.
Compatible With 1995-1996 Ford E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline, E-350 Econoline, E-350 Econoline Club Wagon, F-150, and F-250 applications. This part cross-references OE-style service needs for the same application.
Key Features
- Walker 255-1080 fuel injection pressure regulator
- Steel construction for durability in engine bay conditions
- Standard replacement grade for direct service use
- Non-adjustable design for factory-style fuel pressure control
- 1 inlet, 1 outlet, and 2-port flange mounting layout
- No gauge port for a clean OE-style configuration
- Corrosion-resistant components for fuel system exposure
Detailed Description
The Walker Products fuel injection pressure regulator is engineered to keep fuel pressure within the fuel rail at the correct level so the injectors receive fuel consistently across operating conditions. By matching OE specifications for fit, pressure range, and fuel flow, Walker 255-1080 supports factory-style drivability and straightforward replacement on 1995-1996 Ford E-Series vans and Ford F-150 and F-250 trucks. The direct-fit flange mount helps simplify installation on the original fuel system layout.
Walker 255-1080 is a practical choice when servicing a Ford E-150 Econoline, E-250 Econoline, or F-150 that needs stable fuel pressure control without an adjustable regulator. The steel body and corrosion-resistant construction are suited to the demands of fuel system service and underhood operation.
Common Issues This Part Can Address
- Hard starting, especially during cold starts
- Rough or unstable idle
- Hesitation during throttle input
- Poor fuel economy caused by incorrect fuel pressure
- Fuel delivery inconsistency at the injectors
Installation Notes and Tips
Verify the stamped OE reference on the existing unit before installation, especially on 1995-1996 Ford E-150 Econoline, E-250 Econoline, E-350 Econoline, and related Club Wagon applications marked F5TE9C968BA. Confirm the flange mounting style, inlet and outlet orientation, and fuel rail connection points before removal. Because mounting hardware is not included, reuse or source the correct hardware as needed for the vehicle.
After installation, inspect for fuel leaks and confirm stable idle and throttle response. For best results, replace any damaged seals or related fuel system components during service.
Quality Assurance
Walker Products designs this regulator to OE specifications for fit and fuel pressure control, with corrosion-resistant materials selected for fuel system durability. Part number 255-1080 is built as a direct replacement for factory-style service on the listed Ford applications.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fuel Pressure Control for OE-Style Performance
Walker 255-1080 is a standard replacement fuel injection pressure regulator built to maintain correct fuel pressure in the fuel rail. It supports proper injector delivery for smooth cold starts, stable idle quality, and consistent throttle response on select Ford applications.
Compatible With 1995-1996 Ford E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline, E-350 Econoline, E-350 Econoline Club Wagon, F-150, and F-250 applications. This part cross-references OE-style service needs for the same application.
Key Features
- Walker 255-1080 fuel injection pressure regulator
- Steel construction for durability in engine bay conditions
- Standard replacement grade for direct service use
- Non-adjustable design for factory-style fuel pressure control
- 1 inlet, 1 outlet, and 2-port flange mounting layout
- No gauge port for a clean OE-style configuration
- Corrosion-resistant components for fuel system exposure
Detailed Description
The Walker Products fuel injection pressure regulator is engineered to keep fuel pressure within the fuel rail at the correct level so the injectors receive fuel consistently across operating conditions. By matching OE specifications for fit, pressure range, and fuel flow, Walker 255-1080 supports factory-style drivability and straightforward replacement on 1995-1996 Ford E-Series vans and Ford F-150 and F-250 trucks. The direct-fit flange mount helps simplify installation on the original fuel system layout.
Walker 255-1080 is a practical choice when servicing a Ford E-150 Econoline, E-250 Econoline, or F-150 that needs stable fuel pressure control without an adjustable regulator. The steel body and corrosion-resistant construction are suited to the demands of fuel system service and underhood operation.
Common Issues This Part Can Address
- Hard starting, especially during cold starts
- Rough or unstable idle
- Hesitation during throttle input
- Poor fuel economy caused by incorrect fuel pressure
- Fuel delivery inconsistency at the injectors
Installation Notes and Tips
Verify the stamped OE reference on the existing unit before installation, especially on 1995-1996 Ford E-150 Econoline, E-250 Econoline, E-350 Econoline, and related Club Wagon applications marked F5TE9C968BA. Confirm the flange mounting style, inlet and outlet orientation, and fuel rail connection points before removal. Because mounting hardware is not included, reuse or source the correct hardware as needed for the vehicle.
After installation, inspect for fuel leaks and confirm stable idle and throttle response. For best results, replace any damaged seals or related fuel system components during service.
Quality Assurance
Walker Products designs this regulator to OE specifications for fit and fuel pressure control, with corrosion-resistant materials selected for fuel system durability. Part number 255-1080 is built as a direct replacement for factory-style service on the listed Ford applications.
