Walker 270-1051 Vehicle Speed Sensor Connector
Vehicle Speed Sensor Connector Overview
Walker Products 270-1051 is a vehicle speed sensor connector built for transmission speed sensor service on select Ford, Lincoln, Mazda, Mercury, and Nissan applications. It uses a 2-terminal pin design with male/female connector gender and female terminals for a direct electrical connection at the sensor interface.
Walker Products has supplied automotive fuel system and engine management components since 1946, with manufacturing and engineering support focused on OE-level specifications and application accuracy. The Walker Products line includes electrical and engine management parts for repair and replacement work.
Key Features
- Part number 270-1051 vehicle speed sensor connector
- 2-terminal pin configuration
- Male/female connector gender with female terminals
- Built for transmission output and speed sensor applications
- OE-style replacement for select Ford Mustang, F-150, Escape, and related vehicles
- Walker Products engineering and technical support background
Detailed Description
This connector is used in vehicle speed sensor circuits where a secure electrical connection is needed for transmission output shaft and speedometer-related signal transfer. It is listed across a wide range of applications, including 1999-2014 Ford Mustang, 2005-2008 Ford F-150, 2004-2006 Ford Escape, 1999-2004 Ford F-250 Super Duty, and 1999-2004 Ford F-350 Super Duty. The part number 270-1051 also appears in interchange references with Standard Ignition S-699 and other listed cross-references for the same application.
Walker Products 270-1051 is a practical replacement choice when servicing a damaged, corroded, or unreliable vehicle speed sensor connector on transmission output systems. It supports accurate electrical contact for speed signal communication in vehicles such as Ford Mustang, Ford F-150, and Ford Escape applications.
What It Helps Solve
- Intermittent or lost vehicle speed sensor signal
- Corrosion or heat damage at the transmission connector
- Broken locking tabs or worn terminal contact points
- Speedometer or transmission output signal faults tied to the connector
- Electrical connection issues during speed sensor replacement
Installation Notes and Fitment Tips
Verify connector style, terminal count, and transmission application before purchase. This part is listed for transmission output use on many vehicles, including Fits 1999-2014 Ford Mustang, transmission output; Fits 2005-2008 Ford F-150, transmission output shaft; Fits 2004-2006 Ford Escape, transmission output; and Fits 2007-2008 Mercury Mariner, transmission output. Additional listed applications include Ford Ranger, Ford Expedition, Lincoln Navigator, Mazda Tribute, Mercury Grand Marquis, and Nissan Quest.
Confirm the existing connector shape and terminal layout against the vehicle harness and sensor before installation. For best results, inspect the mating terminals and wiring for damage, then ensure the connector seats fully and locks in place.
Quality Assurance
Walker Products states that its parts are manufactured to meet or exceed OEM standards and specifications, with product management and engineering support used to maintain application accuracy and technical documentation. The company is ISO 9001/IATF16949 certified.
Walker 270-1051 Vehicle Speed Sensor Connector
Vehicle Speed Sensor Connector Overview
Walker Products 270-1051 is a vehicle speed sensor connector built for transmission speed sensor service on select Ford, Lincoln, Mazda, Mercury, and Nissan applications. It uses a 2-terminal pin design with male/female connector gender and female terminals for a direct electrical connection at the sensor interface.
Walker Products has supplied automotive fuel system and engine management components since 1946, with manufacturing and engineering support focused on OE-level specifications and application accuracy. The Walker Products line includes electrical and engine management parts for repair and replacement work.
Key Features
- Part number 270-1051 vehicle speed sensor connector
- 2-terminal pin configuration
- Male/female connector gender with female terminals
- Built for transmission output and speed sensor applications
- OE-style replacement for select Ford Mustang, F-150, Escape, and related vehicles
- Walker Products engineering and technical support background
Detailed Description
This connector is used in vehicle speed sensor circuits where a secure electrical connection is needed for transmission output shaft and speedometer-related signal transfer. It is listed across a wide range of applications, including 1999-2014 Ford Mustang, 2005-2008 Ford F-150, 2004-2006 Ford Escape, 1999-2004 Ford F-250 Super Duty, and 1999-2004 Ford F-350 Super Duty. The part number 270-1051 also appears in interchange references with Standard Ignition S-699 and other listed cross-references for the same application.
Walker Products 270-1051 is a practical replacement choice when servicing a damaged, corroded, or unreliable vehicle speed sensor connector on transmission output systems. It supports accurate electrical contact for speed signal communication in vehicles such as Ford Mustang, Ford F-150, and Ford Escape applications.
What It Helps Solve
- Intermittent or lost vehicle speed sensor signal
- Corrosion or heat damage at the transmission connector
- Broken locking tabs or worn terminal contact points
- Speedometer or transmission output signal faults tied to the connector
- Electrical connection issues during speed sensor replacement
Installation Notes and Fitment Tips
Verify connector style, terminal count, and transmission application before purchase. This part is listed for transmission output use on many vehicles, including Fits 1999-2014 Ford Mustang, transmission output; Fits 2005-2008 Ford F-150, transmission output shaft; Fits 2004-2006 Ford Escape, transmission output; and Fits 2007-2008 Mercury Mariner, transmission output. Additional listed applications include Ford Ranger, Ford Expedition, Lincoln Navigator, Mazda Tribute, Mercury Grand Marquis, and Nissan Quest.
Confirm the existing connector shape and terminal layout against the vehicle harness and sensor before installation. For best results, inspect the mating terminals and wiring for damage, then ensure the connector seats fully and locks in place.
Quality Assurance
Walker Products states that its parts are manufactured to meet or exceed OEM standards and specifications, with product management and engineering support used to maintain application accuracy and technical documentation. The company is ISO 9001/IATF16949 certified.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Vehicle Speed Sensor Connector Overview
Walker Products 270-1051 is a vehicle speed sensor connector built for transmission speed sensor service on select Ford, Lincoln, Mazda, Mercury, and Nissan applications. It uses a 2-terminal pin design with male/female connector gender and female terminals for a direct electrical connection at the sensor interface.
Walker Products has supplied automotive fuel system and engine management components since 1946, with manufacturing and engineering support focused on OE-level specifications and application accuracy. The Walker Products line includes electrical and engine management parts for repair and replacement work.
Key Features
- Part number 270-1051 vehicle speed sensor connector
- 2-terminal pin configuration
- Male/female connector gender with female terminals
- Built for transmission output and speed sensor applications
- OE-style replacement for select Ford Mustang, F-150, Escape, and related vehicles
- Walker Products engineering and technical support background
Detailed Description
This connector is used in vehicle speed sensor circuits where a secure electrical connection is needed for transmission output shaft and speedometer-related signal transfer. It is listed across a wide range of applications, including 1999-2014 Ford Mustang, 2005-2008 Ford F-150, 2004-2006 Ford Escape, 1999-2004 Ford F-250 Super Duty, and 1999-2004 Ford F-350 Super Duty. The part number 270-1051 also appears in interchange references with Standard Ignition S-699 and other listed cross-references for the same application.
Walker Products 270-1051 is a practical replacement choice when servicing a damaged, corroded, or unreliable vehicle speed sensor connector on transmission output systems. It supports accurate electrical contact for speed signal communication in vehicles such as Ford Mustang, Ford F-150, and Ford Escape applications.
What It Helps Solve
- Intermittent or lost vehicle speed sensor signal
- Corrosion or heat damage at the transmission connector
- Broken locking tabs or worn terminal contact points
- Speedometer or transmission output signal faults tied to the connector
- Electrical connection issues during speed sensor replacement
Installation Notes and Fitment Tips
Verify connector style, terminal count, and transmission application before purchase. This part is listed for transmission output use on many vehicles, including Fits 1999-2014 Ford Mustang, transmission output; Fits 2005-2008 Ford F-150, transmission output shaft; Fits 2004-2006 Ford Escape, transmission output; and Fits 2007-2008 Mercury Mariner, transmission output. Additional listed applications include Ford Ranger, Ford Expedition, Lincoln Navigator, Mazda Tribute, Mercury Grand Marquis, and Nissan Quest.
Confirm the existing connector shape and terminal layout against the vehicle harness and sensor before installation. For best results, inspect the mating terminals and wiring for damage, then ensure the connector seats fully and locks in place.
Quality Assurance
Walker Products states that its parts are manufactured to meet or exceed OEM standards and specifications, with product management and engineering support used to maintain application accuracy and technical documentation. The company is ISO 9001/IATF16949 certified.
