Walker 270-1122 Alternator Connector
OE-Style Alternator Connector for Ford and Lincoln
Walker 270-1122 is an OE replacement alternator connector built to restore a secure electrical connection in charging system repairs. It uses molded OE-style housing, pre-terminated leads, and blade terminals to match factory-style alternator wiring on a wide range of Ford, Lincoln, Mercury, Mazda, Saab, and related applications.
With 180.00 wiring harness length, 2 blade terminals, and male/female terminal design, this Walker alternator connector supports clean repairs where heat, corrosion, or vibration has damaged the original plug. The part number 270-1122 is a direct-fit electrical pigtail for charging system service on vehicles such as Ford F-150, Ford Explorer, and Lincoln Town Car applications.
Key Features
- OE replacement alternator connector for charging system repair
- Walker 270-1122 with molded OE-style connector housing
- 180.00 wiring harness length for repair routing
- 2 blade terminals with male/female terminal configuration
- Copper wire and insulation built to OE current, heat, oil, and chemical requirements
- Fits Ford, Lincoln, Mercury, Mazda, Saab, Chevrolet, Cadillac, Jaguar, Saturn, and Pontiac applications listed below
Detailed Description
Walker Products electrical pigtails are engineered to replace damaged harness connectors across critical vehicle systems, including alternator and generator circuits. This connector restores the factory-style interface between the alternator and vehicle wiring without modifying the mating component. It is designed for standard crimp or solder repair methods and is suited for charging system service where the original connector has become brittle, corroded, or heat damaged.
Compatible With 1997-2009 Ford F-150, 2008-2016 Ford Explorer, 1996-2016 Ford Mustang, 1996-2011 Lincoln Town Car, and many other listed Ford and Lincoln models. The Walker 270-1122 also appears in applications across Ford Escape, Fusion, Taurus, Ranger, Expedition, and Transit models, making it a practical choice for alternator connector replacement on high-volume repair jobs.
What This Part Helps Fix
- Broken or loose alternator connector terminals
- Corrosion at the charging system plug
- Heat-damaged or brittle wiring near the alternator
- Intermittent charging or poor electrical contact
- Harness repair needs after connector failure
Installation Notes and Tips
Install using standard crimp or solder repair methods and verify terminal orientation before final connection. Match the OE-style housing to the existing alternator plug and inspect the surrounding harness for heat damage, oil contamination, or broken insulation before completing the repair. Confirm the vehicle-specific connector style, especially on noted applications such as rectangular connector or 3-terminal female configurations.
Quality Assurance
Walker electrical pigtails are built as OE replacement components using copper wire and insulation selected for factory-style electrical performance, flexibility, and resistance to heat, oil, and chemicals. Part number 270-1122 is engineered for dependable alternator connector repair across the listed fitments.
Original: $31.15
-65%$31.15
$10.90Walker 270-1122 Alternator Connector
OE-Style Alternator Connector for Ford and Lincoln
Walker 270-1122 is an OE replacement alternator connector built to restore a secure electrical connection in charging system repairs. It uses molded OE-style housing, pre-terminated leads, and blade terminals to match factory-style alternator wiring on a wide range of Ford, Lincoln, Mercury, Mazda, Saab, and related applications.
With 180.00 wiring harness length, 2 blade terminals, and male/female terminal design, this Walker alternator connector supports clean repairs where heat, corrosion, or vibration has damaged the original plug. The part number 270-1122 is a direct-fit electrical pigtail for charging system service on vehicles such as Ford F-150, Ford Explorer, and Lincoln Town Car applications.
Key Features
- OE replacement alternator connector for charging system repair
- Walker 270-1122 with molded OE-style connector housing
- 180.00 wiring harness length for repair routing
- 2 blade terminals with male/female terminal configuration
- Copper wire and insulation built to OE current, heat, oil, and chemical requirements
- Fits Ford, Lincoln, Mercury, Mazda, Saab, Chevrolet, Cadillac, Jaguar, Saturn, and Pontiac applications listed below
Detailed Description
Walker Products electrical pigtails are engineered to replace damaged harness connectors across critical vehicle systems, including alternator and generator circuits. This connector restores the factory-style interface between the alternator and vehicle wiring without modifying the mating component. It is designed for standard crimp or solder repair methods and is suited for charging system service where the original connector has become brittle, corroded, or heat damaged.
Compatible With 1997-2009 Ford F-150, 2008-2016 Ford Explorer, 1996-2016 Ford Mustang, 1996-2011 Lincoln Town Car, and many other listed Ford and Lincoln models. The Walker 270-1122 also appears in applications across Ford Escape, Fusion, Taurus, Ranger, Expedition, and Transit models, making it a practical choice for alternator connector replacement on high-volume repair jobs.
What This Part Helps Fix
- Broken or loose alternator connector terminals
- Corrosion at the charging system plug
- Heat-damaged or brittle wiring near the alternator
- Intermittent charging or poor electrical contact
- Harness repair needs after connector failure
Installation Notes and Tips
Install using standard crimp or solder repair methods and verify terminal orientation before final connection. Match the OE-style housing to the existing alternator plug and inspect the surrounding harness for heat damage, oil contamination, or broken insulation before completing the repair. Confirm the vehicle-specific connector style, especially on noted applications such as rectangular connector or 3-terminal female configurations.
Quality Assurance
Walker electrical pigtails are built as OE replacement components using copper wire and insulation selected for factory-style electrical performance, flexibility, and resistance to heat, oil, and chemicals. Part number 270-1122 is engineered for dependable alternator connector repair across the listed fitments.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style Alternator Connector for Ford and Lincoln
Walker 270-1122 is an OE replacement alternator connector built to restore a secure electrical connection in charging system repairs. It uses molded OE-style housing, pre-terminated leads, and blade terminals to match factory-style alternator wiring on a wide range of Ford, Lincoln, Mercury, Mazda, Saab, and related applications.
With 180.00 wiring harness length, 2 blade terminals, and male/female terminal design, this Walker alternator connector supports clean repairs where heat, corrosion, or vibration has damaged the original plug. The part number 270-1122 is a direct-fit electrical pigtail for charging system service on vehicles such as Ford F-150, Ford Explorer, and Lincoln Town Car applications.
Key Features
- OE replacement alternator connector for charging system repair
- Walker 270-1122 with molded OE-style connector housing
- 180.00 wiring harness length for repair routing
- 2 blade terminals with male/female terminal configuration
- Copper wire and insulation built to OE current, heat, oil, and chemical requirements
- Fits Ford, Lincoln, Mercury, Mazda, Saab, Chevrolet, Cadillac, Jaguar, Saturn, and Pontiac applications listed below
Detailed Description
Walker Products electrical pigtails are engineered to replace damaged harness connectors across critical vehicle systems, including alternator and generator circuits. This connector restores the factory-style interface between the alternator and vehicle wiring without modifying the mating component. It is designed for standard crimp or solder repair methods and is suited for charging system service where the original connector has become brittle, corroded, or heat damaged.
Compatible With 1997-2009 Ford F-150, 2008-2016 Ford Explorer, 1996-2016 Ford Mustang, 1996-2011 Lincoln Town Car, and many other listed Ford and Lincoln models. The Walker 270-1122 also appears in applications across Ford Escape, Fusion, Taurus, Ranger, Expedition, and Transit models, making it a practical choice for alternator connector replacement on high-volume repair jobs.
What This Part Helps Fix
- Broken or loose alternator connector terminals
- Corrosion at the charging system plug
- Heat-damaged or brittle wiring near the alternator
- Intermittent charging or poor electrical contact
- Harness repair needs after connector failure
Installation Notes and Tips
Install using standard crimp or solder repair methods and verify terminal orientation before final connection. Match the OE-style housing to the existing alternator plug and inspect the surrounding harness for heat damage, oil contamination, or broken insulation before completing the repair. Confirm the vehicle-specific connector style, especially on noted applications such as rectangular connector or 3-terminal female configurations.
Quality Assurance
Walker electrical pigtails are built as OE replacement components using copper wire and insulation selected for factory-style electrical performance, flexibility, and resistance to heat, oil, and chemicals. Part number 270-1122 is engineered for dependable alternator connector repair across the listed fitments.
