Walker 270-1136 Alternator Connector - Front Right, Rear Left or Rear Right
OE-Style Alternator Connector Replacement
Walker 270-1136 is an OE replacement alternator connector built to restore a secure electrical connection where the original plug has heat damage, corrosion, or broken terminals. It uses molded OE-style housing and pre-terminated leads to match factory-style repairs on Chrysler, Dodge, Jeep, Chevrolet, and Hummer applications.
With copper wire, OE-spec insulation, and blade terminals, this Walker pigtail is made for clean repairs on charging-system wiring. It is a practical choice for alternator connector repair on vehicles such as the Dodge Ram, Jeep Wrangler, and Chrysler 300.
Key Features
- Part number: 270-1136
- Alternator connector / electrical pigtail replacement
- OE-style molded connector housing for factory-style fit
- Pre-terminated leads for crimp or solder repair methods
- High-quality copper wire with heat-, oil-, and chemical-resistant insulation
- Blade terminal design, 2-terminal male configuration
- Wiring harness length: 490.00
Detailed Description
Walker 270-1136 is designed for charging-system repairs where the alternator connector has become brittle, corroded, or no longer locks in properly. The connector housing and lead design follow OE replacement standards so the repair can be completed without modifying the mating component. This helps maintain a stable electrical connection in demanding under-hood conditions.
Compatible With 1999-2006 Dodge Ram 1500, 1999-2006 Dodge Ram 2500, 1999-2006 Dodge Ram 3500, 1998-2006 Jeep Wrangler, 1998-2001 Jeep Cherokee, and other listed Chrysler, Dodge, Jeep, Chevrolet, and Hummer applications. Walker 270-1136 is also a fitment-based solution for alternator connector repair on Dodge Dakota, Chrysler Sebring, and Jeep Grand Cherokee models across the listed years.
What It Helps Repair
- Broken or loose alternator connector terminals
- Corrosion at the charging-system plug
- Heat-damaged or brittle wiring near the alternator
- Intermittent charging or connection loss caused by damaged pigtails
- Failed OE connector housings on repairable harness sections
Installation Notes and Tips
Install using standard crimp or solder repair methods and verify terminal orientation before joining the connector to the vehicle harness. Match the blade terminal layout and confirm the connector style against the original alternator plug before splicing. For fitment-specific repairs, use the vehicle listing to confirm the correct application for your year, make, model, and position.
Quality Assurance
Walker Products electrical pigtails are engineered as OE replacement components for dependable factory-style electrical repair. Part number 270-1136 is built with materials selected for current capacity, flexibility, and resistance to heat, oil, and chemicals in automotive environments.
Original: $41.86
-65%$41.86
$14.65Walker 270-1136 Alternator Connector - Front Right, Rear Left or Rear Right
OE-Style Alternator Connector Replacement
Walker 270-1136 is an OE replacement alternator connector built to restore a secure electrical connection where the original plug has heat damage, corrosion, or broken terminals. It uses molded OE-style housing and pre-terminated leads to match factory-style repairs on Chrysler, Dodge, Jeep, Chevrolet, and Hummer applications.
With copper wire, OE-spec insulation, and blade terminals, this Walker pigtail is made for clean repairs on charging-system wiring. It is a practical choice for alternator connector repair on vehicles such as the Dodge Ram, Jeep Wrangler, and Chrysler 300.
Key Features
- Part number: 270-1136
- Alternator connector / electrical pigtail replacement
- OE-style molded connector housing for factory-style fit
- Pre-terminated leads for crimp or solder repair methods
- High-quality copper wire with heat-, oil-, and chemical-resistant insulation
- Blade terminal design, 2-terminal male configuration
- Wiring harness length: 490.00
Detailed Description
Walker 270-1136 is designed for charging-system repairs where the alternator connector has become brittle, corroded, or no longer locks in properly. The connector housing and lead design follow OE replacement standards so the repair can be completed without modifying the mating component. This helps maintain a stable electrical connection in demanding under-hood conditions.
Compatible With 1999-2006 Dodge Ram 1500, 1999-2006 Dodge Ram 2500, 1999-2006 Dodge Ram 3500, 1998-2006 Jeep Wrangler, 1998-2001 Jeep Cherokee, and other listed Chrysler, Dodge, Jeep, Chevrolet, and Hummer applications. Walker 270-1136 is also a fitment-based solution for alternator connector repair on Dodge Dakota, Chrysler Sebring, and Jeep Grand Cherokee models across the listed years.
What It Helps Repair
- Broken or loose alternator connector terminals
- Corrosion at the charging-system plug
- Heat-damaged or brittle wiring near the alternator
- Intermittent charging or connection loss caused by damaged pigtails
- Failed OE connector housings on repairable harness sections
Installation Notes and Tips
Install using standard crimp or solder repair methods and verify terminal orientation before joining the connector to the vehicle harness. Match the blade terminal layout and confirm the connector style against the original alternator plug before splicing. For fitment-specific repairs, use the vehicle listing to confirm the correct application for your year, make, model, and position.
Quality Assurance
Walker Products electrical pigtails are engineered as OE replacement components for dependable factory-style electrical repair. Part number 270-1136 is built with materials selected for current capacity, flexibility, and resistance to heat, oil, and chemicals in automotive environments.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OE-Style Alternator Connector Replacement
Walker 270-1136 is an OE replacement alternator connector built to restore a secure electrical connection where the original plug has heat damage, corrosion, or broken terminals. It uses molded OE-style housing and pre-terminated leads to match factory-style repairs on Chrysler, Dodge, Jeep, Chevrolet, and Hummer applications.
With copper wire, OE-spec insulation, and blade terminals, this Walker pigtail is made for clean repairs on charging-system wiring. It is a practical choice for alternator connector repair on vehicles such as the Dodge Ram, Jeep Wrangler, and Chrysler 300.
Key Features
- Part number: 270-1136
- Alternator connector / electrical pigtail replacement
- OE-style molded connector housing for factory-style fit
- Pre-terminated leads for crimp or solder repair methods
- High-quality copper wire with heat-, oil-, and chemical-resistant insulation
- Blade terminal design, 2-terminal male configuration
- Wiring harness length: 490.00
Detailed Description
Walker 270-1136 is designed for charging-system repairs where the alternator connector has become brittle, corroded, or no longer locks in properly. The connector housing and lead design follow OE replacement standards so the repair can be completed without modifying the mating component. This helps maintain a stable electrical connection in demanding under-hood conditions.
Compatible With 1999-2006 Dodge Ram 1500, 1999-2006 Dodge Ram 2500, 1999-2006 Dodge Ram 3500, 1998-2006 Jeep Wrangler, 1998-2001 Jeep Cherokee, and other listed Chrysler, Dodge, Jeep, Chevrolet, and Hummer applications. Walker 270-1136 is also a fitment-based solution for alternator connector repair on Dodge Dakota, Chrysler Sebring, and Jeep Grand Cherokee models across the listed years.
What It Helps Repair
- Broken or loose alternator connector terminals
- Corrosion at the charging-system plug
- Heat-damaged or brittle wiring near the alternator
- Intermittent charging or connection loss caused by damaged pigtails
- Failed OE connector housings on repairable harness sections
Installation Notes and Tips
Install using standard crimp or solder repair methods and verify terminal orientation before joining the connector to the vehicle harness. Match the blade terminal layout and confirm the connector style against the original alternator plug before splicing. For fitment-specific repairs, use the vehicle listing to confirm the correct application for your year, make, model, and position.
Quality Assurance
Walker Products electrical pigtails are engineered as OE replacement components for dependable factory-style electrical repair. Part number 270-1136 is built with materials selected for current capacity, flexibility, and resistance to heat, oil, and chemicals in automotive environments.
