Dorman 594-770 Engine Harmonic Balancer
Engine Harmonic Balancer for Mazda, Ford, and Mercury
Dorman 594-770 is a direct replacement engine harmonic balancer built to absorb crankshaft vibration and support smoother engine operation. It uses a stress-resistant rubber bond and ductile steel construction for durability in demanding underhood conditions.
Compatible With 2004-2005 Mazda 3, 2006-2007 Mazda 5, 2008 Ford Escape, and 2008 Mercury Mariner. This Dorman 594-770 harmonic balancer is a practical OE-style replacement for vehicles that need reliable vibration control and consistent belt drive performance.
Key Features
- Direct replacement harmonic balancer for listed applications
- Stress-resistant rubber bond helps absorb engine vibration
- Ductile steel construction for tensile and impact strength
- Black finish
- Serpentine belt drive design with 11 pulley grooves
- Single mounting hole design
- Cross-references PowerBond by Dayco PB1387N and LF5011400 for the same application
Detailed Description
Built for the engine cylinder block components category, Dorman 594-770 is engineered to match the original harmonic balancer function on select Mazda, Ford, and Mercury vehicles. The balancer’s rubber isolator helps reduce torsional vibration from the crankshaft, while the ductile steel body adds strength for long-term service. Key dimensions include a 26.3 inside diameter, 140 outside diameter, and 28.2 depth, along with an 11-groove serpentine pulley layout.
Fits 2004-2005 Mazda 3, 2006-2007 Mazda 5, 2008 Ford Escape, and 2008 Mercury Mariner. For shoppers searching for a 2004-2005 Mazda 3 harmonic balancer, a 2006-2007 Mazda 5 crankshaft balancer, or a 2008 Ford Escape engine harmonic balancer, this part number 594-770 provides a direct replacement option.
What It Helps Address
- Crankshaft vibration that can affect engine smoothness
- Worn or damaged harmonic balancer rubber bond
- Belt drive noise or irregular pulley operation
- Replacement needs after balancer wear, cracking, or separation
- OE-style service for select Mazda, Ford, and Mercury engines
Installation Notes and Tips
Verify pulley groove count, mounting dimensions, and engine application before installation. Inspect the crankshaft snout, belt condition, and surrounding front-engine components for wear or damage before fitting the new balancer. Because the center bolt and washer are not included, confirm the correct fasteners are available for the vehicle service procedure.
Quality Assurance
Dorman designs this harmonic balancer as a direct replacement part with materials selected for strength and vibration control. The ductile steel construction and bonded rubber isolator support dependable service in the applications listed for part number 594-770.
Dorman 594-770 Engine Harmonic Balancer
Engine Harmonic Balancer for Mazda, Ford, and Mercury
Dorman 594-770 is a direct replacement engine harmonic balancer built to absorb crankshaft vibration and support smoother engine operation. It uses a stress-resistant rubber bond and ductile steel construction for durability in demanding underhood conditions.
Compatible With 2004-2005 Mazda 3, 2006-2007 Mazda 5, 2008 Ford Escape, and 2008 Mercury Mariner. This Dorman 594-770 harmonic balancer is a practical OE-style replacement for vehicles that need reliable vibration control and consistent belt drive performance.
Key Features
- Direct replacement harmonic balancer for listed applications
- Stress-resistant rubber bond helps absorb engine vibration
- Ductile steel construction for tensile and impact strength
- Black finish
- Serpentine belt drive design with 11 pulley grooves
- Single mounting hole design
- Cross-references PowerBond by Dayco PB1387N and LF5011400 for the same application
Detailed Description
Built for the engine cylinder block components category, Dorman 594-770 is engineered to match the original harmonic balancer function on select Mazda, Ford, and Mercury vehicles. The balancer’s rubber isolator helps reduce torsional vibration from the crankshaft, while the ductile steel body adds strength for long-term service. Key dimensions include a 26.3 inside diameter, 140 outside diameter, and 28.2 depth, along with an 11-groove serpentine pulley layout.
Fits 2004-2005 Mazda 3, 2006-2007 Mazda 5, 2008 Ford Escape, and 2008 Mercury Mariner. For shoppers searching for a 2004-2005 Mazda 3 harmonic balancer, a 2006-2007 Mazda 5 crankshaft balancer, or a 2008 Ford Escape engine harmonic balancer, this part number 594-770 provides a direct replacement option.
What It Helps Address
- Crankshaft vibration that can affect engine smoothness
- Worn or damaged harmonic balancer rubber bond
- Belt drive noise or irregular pulley operation
- Replacement needs after balancer wear, cracking, or separation
- OE-style service for select Mazda, Ford, and Mercury engines
Installation Notes and Tips
Verify pulley groove count, mounting dimensions, and engine application before installation. Inspect the crankshaft snout, belt condition, and surrounding front-engine components for wear or damage before fitting the new balancer. Because the center bolt and washer are not included, confirm the correct fasteners are available for the vehicle service procedure.
Quality Assurance
Dorman designs this harmonic balancer as a direct replacement part with materials selected for strength and vibration control. The ductile steel construction and bonded rubber isolator support dependable service in the applications listed for part number 594-770.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engine Harmonic Balancer for Mazda, Ford, and Mercury
Dorman 594-770 is a direct replacement engine harmonic balancer built to absorb crankshaft vibration and support smoother engine operation. It uses a stress-resistant rubber bond and ductile steel construction for durability in demanding underhood conditions.
Compatible With 2004-2005 Mazda 3, 2006-2007 Mazda 5, 2008 Ford Escape, and 2008 Mercury Mariner. This Dorman 594-770 harmonic balancer is a practical OE-style replacement for vehicles that need reliable vibration control and consistent belt drive performance.
Key Features
- Direct replacement harmonic balancer for listed applications
- Stress-resistant rubber bond helps absorb engine vibration
- Ductile steel construction for tensile and impact strength
- Black finish
- Serpentine belt drive design with 11 pulley grooves
- Single mounting hole design
- Cross-references PowerBond by Dayco PB1387N and LF5011400 for the same application
Detailed Description
Built for the engine cylinder block components category, Dorman 594-770 is engineered to match the original harmonic balancer function on select Mazda, Ford, and Mercury vehicles. The balancer’s rubber isolator helps reduce torsional vibration from the crankshaft, while the ductile steel body adds strength for long-term service. Key dimensions include a 26.3 inside diameter, 140 outside diameter, and 28.2 depth, along with an 11-groove serpentine pulley layout.
Fits 2004-2005 Mazda 3, 2006-2007 Mazda 5, 2008 Ford Escape, and 2008 Mercury Mariner. For shoppers searching for a 2004-2005 Mazda 3 harmonic balancer, a 2006-2007 Mazda 5 crankshaft balancer, or a 2008 Ford Escape engine harmonic balancer, this part number 594-770 provides a direct replacement option.
What It Helps Address
- Crankshaft vibration that can affect engine smoothness
- Worn or damaged harmonic balancer rubber bond
- Belt drive noise or irregular pulley operation
- Replacement needs after balancer wear, cracking, or separation
- OE-style service for select Mazda, Ford, and Mercury engines
Installation Notes and Tips
Verify pulley groove count, mounting dimensions, and engine application before installation. Inspect the crankshaft snout, belt condition, and surrounding front-engine components for wear or damage before fitting the new balancer. Because the center bolt and washer are not included, confirm the correct fasteners are available for the vehicle service procedure.
Quality Assurance
Dorman designs this harmonic balancer as a direct replacement part with materials selected for strength and vibration control. The ductile steel construction and bonded rubber isolator support dependable service in the applications listed for part number 594-770.
